• [11:25 - 11:45] Experimental Aircraft for European Leadership in Aviation (EXAELIA):Overview of First Results and Initial Roadmaps
  Johan Kos, Timeea Pacala, Christoph Mertens     
• [11:45 - 12:05] Design of a SAF Long Range BWB in the frame of the European Project EXAELIA
  J. Gauvrit-Ledogar, V. Priasso, C. Toussaint, A. Trémolet, E. Nguyen Van, S. Defoort, M. Peschmann, P. Brunow, G. Starck, O. Atinault  
• [12:05 - 12:25] Conceptual design of a long-range aircraft with liquid-hydrogen propulsion and a truss-braced wing
  Lucas Kugler, Tobias Hecken, Carsten Liersch, Mauro Minervino, Domenico Quagliarella, Giovanni Andreutti, Frederico Cardoso, Victor Martin Sancho
• [12:25 - 12:45] Design of Liquid Hydrogen Fuelled Blended Wing Body Aircraft for Long Range Missions
  Joseph Lok Chun Chan, Craig Lawson, Howard Smith  
• [12:45 - 13:05] Modelling and preliminary design of liquid-hydrogen fuel systems for future long-range aircraft
  Enrico De Betta, Damiano Tormen, Michael Quaglia, Francesco Mastropierro, George Lampeas, Lucas Kugler, Joseph Chan  
• [13:05 - 13:25] Retractable Vortex Generators (RVGs) integration in high lift devices
  A. Gaz, M. Minervino, F. A. Cardoso, V. M. Sancho

• [11:25 - 11:45] Continuous Bi-directional Trailing Edge Morphing using Hyperelastic Solid Hinges
  Jan Tikalsky       
• [11:45 - 12:05] Aerodynamic Performance of Droop Leading Edge Aerofoils at Low Reynolds Numbers
  Shanshan Xiao, Mark Jabbal, Humberto Medina , Mohammadreza Amoozgar     
• [12:05 - 12:25] Experimental investigation of corrugated airfoils at low Reynolds numbers
  Wilm Friedrichs, Michael Ammann, Patrick Jenni, Marius Banica
• [12:25 - 12:45] γ-〖Re〗_θ-SST parameter and inflow turbulence condition tuning for corrugated airfoils at low Reynolds numbers
  Marius Banica    
• [12:45 - 13:05] Performance Investigation of UAV Propellers via Wind Tunnel Testing
  A. Polychronaki, A. Chasouras, P. Panagiotou    
• [13:05 - 13:25] A Fast Design Methodology for eVTOL UAV Propeller Considering Noise Emissions
  Jan Šimák, Miroslav Šmíd 
   

• [11:25 - 11:45] European aero-engine research policy from NPA Technology Cluster perspective addressing the upcoming 10th Research Framework Programme 
  Ralf von der Bank
• [11:45 - 12:05] Revolutionary Propulsion: From an Idea to a Proven Concept. And Beyond?
  Arne Seitz
• [12:05 - 12:25] Challenges for integration of direct H2 combustion concepts in innovative aircraft layouts
  Vlahostergios Z., Panagiotou P., Misirlis D., Yakinthos K.
• [12:25 - 12:45] Ultrashort and Thin, Slotted Adaptive Nacelle for Ultra-High Bypass Ratio Turbofans
  Nicolás García Rosa, Nicolas Doué, Nicolas Tantot
• [12:45 - 13:05] Development of a Hydrogen-Fuelled Opposed-Free-Piston Engine Test Rig for Characterising Performance and NOx Emissions
  Joseph Harper, Andrew Rolt, Gaurav Singh, Vishal Sethi
• [13:05 - 13:25] Reduced Order Thermodynamic Modeling of an Opposed-Free Piston Engine for a Composite Cycle Gas Turbine Aero Engine
  Krzysztof Danielak, Joe Harper, Buchan Deneys Schreiner, Vishal Sethi

• [11:25 - 11:45] Configuration for Optimal Integration of Hydrogen Fuel for a Medium-Range Airplane
  Vishwanath Nagaraj, Roelof Vos
• [11:45 - 12:05] Assessment of Regional to Long-Range LH2-Powered Aircraft with Conformal Wing Tanks
  Marc Engelmann, Chang Xu, Nils Roth, Barlas Türkyilmaz
• [12:05 - 12:25] Design Criteria Definition of Liquid Hydrogen Fuel Systems for Aircraft Application
  Valentina Villada Quiceno, Tim Burschyk, Jan Haemisch, Clément Foussat
• [12:25 - 12:45] Hydrogen strut braced wing aircraft a common ONERA / DLR evaluation and benchmark model
  Eric Nguyen Van, Lucas Kugler, Michael Kotzem, Enrico Stragiotti, Dimitrios Glenis, Sebastian Wöhler, Sebastien Defoort
• [12:45 - 13:05] Results of the PRECISE Project: Liquid hydrogen fuel quantity indication systems for future aircraft
  Adrian Winter, Valentin Weinig, Ali Alijev, Yannick Pott, Kay Kochan, Oliver Burkhard
• [13:05 - 13:25] Optimised Dished-End Profiles for Lightweight LH2 Tanks: An Analytical-FEA Framework
  Juan. E. Arjona Rodriguez, Rodrigo Gomez Vazquez, Laurens Tanzer

• [11:25 - 11:45] Inputs for laser solutions for space debris mitigation or space transportion
  M. Schneider, H. Hichami, S.A.E. Boyer, M. Boustie, M. Arrigoni, C. R. Phipps, S. Boujnah, S. Oriol, S. Paolacci-Riera, E. Bartnicki
• [11:45 - 12:05] Aeronautical composite structure dismantling using laser shock processing
  Bryan Better, Aboulghit El Malki Alaoui, Michel Arrigoni, Christine Espinosa, Serge Guetta
• [12:05 - 12:25] Numerical modelling of the thermomechanical loading induced by electric fault arc in aeronautical electrical network
  M.C Henao Peñaranda, C. Rond, P. Longere, M. Malatesta
• [12:25 - 12:45] Laser Ablation Propulsion for space debris removal: impulse generation by aluminum and role of irradiation parameters
  Battocchio P.
• [12:45 - 13:05] Assessing Post Explosion Conditions in Space Launcher Breakup Scenarios for Debris Prediction
  Virot F., Bellenoue M.
• [13:05 - 13:25] Modelling of hypervelocity impacts of debris using a meshless gamma-sph scheme
  Anthony Collé, Jérôme Limido

• [11:25 - 11:45] Learning-based enhancement of augmented Lagrangian coordination for distributed multidisciplinary design optimization 
  Edward Louis, Ahmed Bayoumy, Michael Kokkolaras
• [11:45 - 12:05] Detecting Critical Transitions in Aerospace Technology Systems Using Empirical Dynamic Modeling
  Massimo Panarotto
• [12:05 - 12:25] The Value of First-Order Relationships in Decision-Making Process
  Timoleon Kipouros, Ola Isaksson, Anna-Maria Rivas McGowan
• [12:25 - 12:45] Data-Driven Engineering Design for Aerospace Manufacturing and Systems: 
  Promise vs. Perils
  Anna-Maria Rivas McGowan, Timothy W. Simpson
• [12:45 - 13:05] Structured framework for innovative aircraft design with probabilistic solution spaces using Bayesian networks and the Advanced Morphological Approach
  Vladislav T.Todorov, Dmitry Rakov, Andreas Bardenhagen
• [13:05 - 13:25] Adaptive Production Planning in Aerospace Manufacturing through the Integration of Knowledge Graphs, Simulations and Cyber-Physical Systems
  Thomas Hanl, Philip Satwan, Yassine Ghanjaoui, Jörn Biedermann

• [11:25 - 11:45] Simulation-Based Framework for UAS Operational Risk Assessment and Compliance with EASA and Transport Canada SORA-Based Regulatory Approaches
  Nezar Sahbon, Anna Mazur, Michał Welcer Piotr Ginter, Jay Matlock , Patrick Heaney , Afzal Suleman
• [11:45 - 12:05] Improving Efficiency and Modularity for the Certification of New Airborne Hardware
  Samuel Kleine
• [12:05 - 12:25] Forecasting the Socioeconomic Impacts of Innovative Air Mobility: A Welfare Assessment Framework
  Mahdi Gholami, Anna Palaiologk, Kyriaki Daskaloudi, Eva Palaiologk
• [12:25 - 12:45] Certification of Hydrogen-Powered Aircraft: A Three-Layer Mapping Approach to Address Regulatory Readiness, Knowledge Gaps, and Safety Risks
  Jeroen Tuijp, Anna Biancotto, Ferran van Kan, Helder Xavier Nunes, Rui Dinis Ferreira, Vinícius Santini Lobo
• [12:45 - 13:05] Certification of Hydrogen-Powered Aircraft: Lessons Learned and Mitigation Strategies for Risk-Informed Development
  Jeroen Tuijp, Anna Biancotto, Ferran van Kan, Helder Xavier Nunes, Rui Dinis Ferreira, Vinícius Santini Lobo
• [13:05 - 13:25] Scaffolding Regulatory Compliant Data Products for Aerospace Data Ecosystems
  Henning Berg, Cansu Tanrikulu, Jonas Klumski, Jérémy Mambrini, Achim Hofmann, Kai Lindow

• [11:25 - 11:45] The impact of circular economy on the future European long-range aircraft
  L. Paletti, P. Panagiotis, D. Markatos, S. Pantelakis, G. Wende, A. Filippatos
• [11:45 - 12:05] From sustainability criteria and LCA data to priorities for aircraft design: an introductory approach
  P. L. Y. Léonard, E. A. Arnardóttir, S. Oguz, S. I. Hallstedt, J. W. Nylander
• [12:05 - 12:25] Eco-Efficiency Assessment of Hydrogen Aircraft APU Maintenance Strategies: Integrating Economic and Environmental Criteria
  Dhrumit Jignesh Upadhyay, Ahmad Ali Pohya, Gerko Wende
• [12:25 - 12:45] Value-driven decision-making methodology to identify the best cargo door latching mechanism considering performance, supply chain, sustainability and reliability criteria at the same time
  Panagiotis Pantelas, Giuseppa Donelli, Carlos Cabaleiro de la Hoz, Hanno Niemann, Angelos Filippatos, Dionysios Markatos, Luca Boggero, Björn Nagel
• [12:45 - 13:05] Assessing Social Impact for Sustainable Aircraft Design through an SLCA Framework
  D. Markatos, A. Pasqualone, S. Pantelakis , A. Filippatos
• [13:05 - 13:25] Material Selection for 3D-Printed CubeSat Structural Subsystems Using a Holistic Sustainability
  T. Kalampoukas, N. Raptis, E. Bilalis, D. Markatos , A. Filippatos

• [11:25 - 11:45] Design and Integration of an AI-Based ATC Communicator within a Digital Co‑Pilot for Single Pilot Operations 
  Yasir Mahmood Khan, Marko Radanović
• [11:45 - 12:05] Experiments with a Low-Cost True North Heading Sensor for General Aviation
  Cristian Emil Constantinescu, Octavian Thor Pleter, Irina Beatrice Ștefănescu
• [12:05 - 12:25] GRAPH-DECIDE: A Graph-Based, Multi-Criteria Decision-Support Framework for Air Traffic Management under Delay and Capacity Uncertainty
  Elahi Concha, Paul Hernandez, Ismini Stroumpou, Josep Lluis Larriba-Pey
• [12:25 - 12:45] Aggregated metrics for the evaluation of ATM efficiency
  Gabriele Sirtori, Laurent Joly
• [12:45 - 13:05] Predicting Go-Around Likelihood: Towards the Development of an EASA-Compliant AI-Based Decision Support System  
  Aleyna Erdogan, Johann Maximilian Christensen, Frank Köster, Elena Hoemann, Sven Hallerbac
• [13:05 - 13:25]  Improved Aircraft Protection on Ground Through Heterogeneous Sensor Fusion: an Experimental Assessment
  Angelo Manco, Federica Vitiello, María Carmela Mas Marhuenda, Giancarlo Gelao, Gabriella Gigante, Piero Migliorato, Angela Vozella, Paolo Veneruso, Enrico Miccio, Flavia Causa, Roberto Opromolla, Giancarmine Fasano, Pablo Manuel Guzmán Manzanares, Francisco Javier Garrido Hernández, Francisco Javier Pérez Grau, Giovanni Franzini

• [14:30 - 14:50] Development of a Modular Flying Testbed for the Demonstration of Innovative Powertrains
  M. Armbrust, D. P. Bergmann, N. Moebs, A. Strohmayer
• [14:50 - 15:10] Multi-Scale Flying Testbed Strategy for Supporting the Development of Long-Range Liquid Hydrogen Tube-and-Wing Aircraft
  Ferran van Kan, Kathrin Deck, Andres Jürisson, Roger Ballester Claret, Christoph Mertens
• [15:10 - 15:30] Multiscale Modular BWB FTB Design Benefits and Requirements
  W. Widjaja, A. Gaz, C. Lawson, C. Villena Muñoz, O. Nistor
• [15:30 - 15:45] On-Ground Common Infrastructure and Data Measurement Approach Supporting EXAELIA Flying Testbed Experimentation
  A. Vitale, J. Orio, A. Bordei, K. Knepper
• [15:45 - 16:00] High fidelity static aeroelastic analysis of aileron spanwise effectiveness in flexible HAR wings
  Andriy Payenskyy, Pamela Bugała, Magdalena Gronowska, Paweł Abratowski, Evangelos Filippou, Jurii Sodja, Andres Jürisson, Huub Timmermans
• [16:00 - 16:15] Comparative impact assessment of a future long-range aircraft with an entry-into-service in 2050 – Preliminary Assessment Framework & Results
  T. Pacala, P.Ratei, L. Paletti, D. Markatos, A. Pasqualone, A. Filippatos, F. Petrosino, M. Solazzo, J. Page, M. Armbrust, B. Dziugieł, M. Maczka, B.Peerlings, W.Lammen, E.Scheers, D. Kan, G. Gratton, T. Zill
• [16:15 - 16:30] A Holistic Sustainability Assessment Framework for Aircraft Conceptual Design
  A. Filippatos, D. Markatos, G. Lampeas, S. Pantelakis

• [14:30 - 14:50] Influence of payload on the design of a solar UAV to achieve year round operations
  Hayden Mydland, Ruben E Perez
• [14:50 - 15:10] Drive Train Architectural Considerations and Design for the DLR High-Altitude Platform
  Daniel Ackermann, Patrick Juchmann
• [15:10 - 15:30] Energy harvesting from atmospheric vortices
  E. Poquillon, J.M. Moschetta, J. Bordeneuve-Guibé
• [15:30 - 15:50] System Identification of a Lifting Body Fixed-Wing UAV Under Data Quality Constraints
  Luke H. Peristy
• [15:50 - 16:10] Influence of Servo Actuator Power Supply on the Modal Characteristics of an Unmanned Patrol Aircraft during Ground Vibration Testing
  Szcześniak M., Rogólski R., Olejnik A.
• [16:10 - 16:30] Strength analysis of the structure of an unmanned water surface - aerial platform that utilizes the wing in the ground effect made of composite materials
  Gerigk Mirosław Krzysztof, Rykaczewski Dariusz

• [14:30 - 14:50] System-Level Modelling of a Recuperative Cathode Air Supply System for a Hydrogen-Fuel-Cell-Electric Regional Aircraft
  T.S. Bakker, F. Ascione, J. Biesheuvel, R. Heukers, A.I. de Boer
• [14:50 - 15:10] Test Results for a 500 kW Hydrogen Fuel Cell-Electric Powertrain for Ground Demonstration
  T. Luten, A.K. te Nijenhuis, R.C. van Benthem, D. Vogelsang, A. Pauw, T. Mrzelj, G. Tavčar, S. Posner, R. Schwarz
• [15:10 - 15:30] Design methodology for hydrogen-powered hybrid propulsion system architectures for short-range aviation
  Daniel Velasco-Perez, Marcos Lopez-Juarez, Ricardo Novella, Josep Gomez-Soriano
• [15:30 - 15:50] On the Implementation and Assessment of the Solid and Permeable Ffowcs Williams–Hawkings Surfaces for Contra-Rotating Open Rotor Aeroacoustics
  T. Tsaousidis, A. Gaitanidou, P. Oikonomou, V. Gkoutzamanis, A. Kalfas
• [15:50 - 16:10] Rechargeable Battery-Integrated Islanded Grid Architectures for Highly Electrified Aircraft
  Andrea Reindl, Georgi Atanasov, Franciscus van der Linden
• [16:10 - 16:30] Battery Integration in Electric Aviation: A Review of Venting Systems and Strategies
  Onur Akkol, Lukas Richter, Stefanie de Graaf

• [14:30 - 14:50] Comparative Analysis of Energy Management Strategies for Battery-less Multi-Stack PEMFC Systems in Regional Aviation
  Bing Ni, Bänsch Cornelie
• [14:50 - 15:10] Thermal-Structural Modelling and Optimisation of LH2 Vacuum-Insulated Lattice-Core Sandwich Tank
  I. Valais, C. Gayer, B. Gerhards, K.-U. Schröder
• [15:10 - 15:30] Numerical study to assess the crashworthiness of a composite conformal LH2 tank
  Bram Noordman, Rens Ubels
• [15:30 - 15:50] Capacity Scale Effects in Power-to-Liquid Sustainable Aviation Fuel Production: A Techno-Economic and Project-Finance Assessment
  Kubra Uygun, Hulya Cebeci
• [15:50 - 16:10] APFEL – Analysis of Hydrogen Permeation Properties of Fiber-Reinforced Polymer Composites for High-Pressure Hydrogen Storage under Cyclic Loading
  Tom Blümel, Rabea Klara Sahr
• [16:10 - 16:30] CryoTOAD – An Open-Source Cryogenic Tank Thermal model for Overall Aircraft Design
  Romain Jan, Jean-Marc Moschetta

• [14:30 - 14:50] Energy-Aware Opportunistic Connectivity for Earth Observation Satellites Using Commercial LEO Megaconstellation Relays
  M. A. Karimi, M. De Sanctis, T. Rossi, E. Cianca
• [14:50 - 15:10] Adaptive Repurposing of Spaceborne Imaging Platforms for Non-Earth Observation
  Alessia Speziale, Antonio Vito Montalbò
• [15:10 - 15:30] Experimental demonstration on a SATCOM modem with anti-jamming
  Daniele Gatti
• [15:30 - 15:50] Robustness-Driven Design of W-Band GaN LNAs for Next-Generation Satellite Receivers
  S. Mostarda, S. Colangeli, P.E. Longhi, W. Ciccognani, A. Serino, E. Limiti
• [15:50 - 16:10] Dual-Band Ku/Ka Low-Noise Amplifier MMIC Development for Future Flexible Satellite Payloads
  Parand P., Colangeli S., Longhi P., Limiti E.
• [16:10 - 16:30] Integrated Evaluation of Radiation, Thermal and Atomic Oxygen Effects on Structural Materials for Low Earth Orbit Satellite Applications
  Terlan Doğan, İrem Yanık, Sera İflazoğlu, İlknur Baylakoğlu, Hande Girard

• [14:30 - 14:50] Utilising AI and LLM for rigorous uncertainty construction
  Petar Hristov, Alexander Kostadinov, Petar Tomov, Scott Ferson
• [14:50 - 15:10] Expert-in-the-loop Explainable Artificial Intelligence to Support Design Engineering Decision Making
  Szymon Bobek, Grzegorz Nalepa, Timoleon Kipouros
• [15:10 - 15:30] Visual Analytics-Enabled Design Space Exploration of Aircraft Configurations from Top-Level Requirements
  Shubham S., Spinelli A., Kipouros T.
• [15:30 - 15:50] How Much Autonomy Should an Engineering Agent Have? Benchmarking LLM Harnesses for Airworthiness Verification
  Alejandro Pradas-Gomez, Arindam Brahma, Ola Isaksson
• [15:50 - 16:10] Beyond Visualization: Explainable Ai For Complex Data Exploration
  Raúl García Sánchez, Andrea Mancini
• [16:10 - 16:30] On AI-Enabled Quality-Oriented Manufacturing Process Steering
  Emmanouil Stathatos, Panorios Benardos, George-Christopher Vosniakos

• [14:30 - 14:50] How standards support innovation in aviation?
  Atiqah Pillain
• [14:50 - 15:10] Analysis of regulation gap and risk for disruptive aviation concepts: CONCERTO methodology
  Joël Jézégou, Alexander Kieß, Sergio Pizziol, Christel Seguin, Jürgen Arnold, Giovanni Cilio, Eliano Simone,
  Julie Renon, Anupam Abhishek
• [15:10 - 15:30] Towards Certification by Analysis for Aircraft Systems: Early Insights, Challenges and Opportunities from Initial Research Use Cases
  Florian Jäger, Andreas Schäfer
• [15:30 - 15:50] Damage Models at Multiple Length Scales for Virtual Testing and Qualification/Certification by Analysis
  Albertino Arteiro, Pedro J. Cunha, Denis Dalli, Paulo Teixeira Gonçalves
• [15:50 - 16:10] Virtual EMA-Base Modal Validation of the CONCERTO Aircraft Actuation Test Bench
  Alexopoulos Spyridon, Kelverkloglou Panagiota, Kostopoulos Vasilis, Lampeas George
• [16:10 - 16:30] From Kerosene to Hydrogen: Experimental Foundations for Future Aviation Fire Standards
  Rémi Ballet

• [14:30 - 14:50] Life Cycle Assessment of the HEROPS flying fuel cell
  Kan DM., Scheers E., De Witte PJ., Vroom M., Reekers M.
• [14:50 - 15:10] A combined LCA and noise comparison of transportation modes on five typical intra-European routes
  J. Beintema, L. van Dam, E. Scheers
• [15:10 - 15:30]  Introducing a new aerospace-specific life cycle assessment inventory
  Michael P. Weinold, Achille Laurent
• [15:30 - 15:50] A Novel Life Cycle Impact Assessment Method Tailored to Aviation Emissions
  Félix Pollet, Thomas Planès
• [15:50 - 16:10] Gauging the developments from environmental risk assessment to critical decision support, possibly as life cycle impact assessment, surfaced in simplified life cycle assessment in aeronautics
  John Simpson, Torsten Moll, Maud Lemagnen
• [16:10 - 16:30] Environmental performance of a single-use PET mandrel for one-piece CFRP air inlet ducts: A comparative life cycle assessment
  Fabian Flüh, Sabrina Diniz, Karina Kroos

• [14:30 - 14:50] Proposal of an enhanced qualitative safety assessment framework for A-to-A HTOL suborbital operations in ATM using a EUROCONTROL-based risk modelling
  Errico A., Travascio L., Vozella A.
• [14:50 - 15:10] A Teamwork Assistant for Adaptive Human-AI Collaboration in Air Traffic Management: Findings from the DIALOG Project
  Marianna Groia, Bertille Somon, Souhir Ezzedini, Maria Emine Nylund, Erik Gøsta Nilsson, Morten Smedsrud, Antoine Pultier, Anne-Marie Brouwer, Efecan Yilmaz, Konrad Hagemann, Stefan Tenoort, Serge Pierre, Yannick Migliorini, Samy Chikhi, Nicola Cavagnetto
• [15:10 - 15:30] Massive Cherry-Picking Multi-Objective Air Traffic Flow Management Through Lexicographic Optimisation, Trade-Offs, Analysis and Fine-tuning
  Marcos Moreno Solana
• [15:30 - 15:50] Towards a more flexible ATCO Rostering – key elements, implementation roadmap and alignment with current regulations
  Michael Finke, Jana Meier, Marco Temme
• [15:50 - 16:10] A Numerical Testbed for Analysing Air Traffic Controller Experience Complexity
  Jana Meier, Marco-Michael Temme, David Seewald
• [16:10 - 16:30] Operational Validation of Flow-Centric Regulation Planning for Pre-tactical Air Traffic Flow and Capacity Management
  Zhengyi Wang, Thinh Hoang, Matteo Cavalletti, Leila Zerrouki

• [10:30 - 10:50] Eco-Design and Life Cycle Assessment for Hybrid Electric Aircraft
  Thomas Felix Reichert, Peter Brantsch, Gabriela Gromer
• [10:50 - 11:10] High level LCA of low impact aircraft developed in Clean Aviation HERA project
  Marco Fioriti, Felicia Molinaro
• [11:10 - 11:30] Analysis on critical and relevant raw materials for hybrid electric aircraft applications
  Peter Brantsch, Gabriela Gromer
• [11:30 - 11:50] Life Cycle Assessment of Aircraft Wing Structures: A Comparative Study of Aluminium and Carbon Fibre Composites
  Kelverkloglou P., Stavropoulou K., Kilimtzidis S., Neumann de la Cruz. Deborah, Rodríguez M., Kostopoulos V., Psarras S.
• [11:50 - 12:10] Environmental Impacts of Sustainable Aviation Fuels and Alternative Energy Vectors: Review of existing Life Cycle Assessment data
  Ricardo Sendão, Helena Monteiro, Mário Ribeiro, Marco Fioriti
• [12:10 - 12:30] Open Discussion

• [10:30 - 10:50] Airframe Multidisciplinary Design, Analysis and Optimization in Early Design Stages Using a Standardised Parametric Aircraft Description
  Ögmundur Petersson, Sebastian Deinert
• [10:50 - 11:10] Surrogate-Based Aerostructural Optimization of a Composite Low-Reynolds-Number UAV Wing
  Spyridon Kilimtzidis, Eleftherios Nikolaou, Panagiota Kelverkloglou, Vaios Lappas and Vassilis Kostopoulos
• [11:10 - 11:30] Applicability of Graph Neural Networks on Surface Field Predictions of Subsonic UAV Wings
  Giorgos Efrem, Chris Pliakos, Pericles Panagiotou
• [11:30 - 11:50] Aerodynamic shape optimization of airfoils under geometric constraints
  Ali Arshadi, Dinusha Nethruwan Wijesinghe Wijesinghe Appuhamilage
• [11:50 - 12:10] Two-Way Fluid-Structure Interaction Framework for Synthetic Jet Actuator Modelling
  I. Agravat, M. Jabbal, A. Popov, J.P. Rouse
• [12:10 - 12:30] From Drone to Sports Aerodynamics: A Road to Olympic Medal
  Ali Arshad, Dinusha Wijesinghe, Toms Kaidalovs

• [10:30 - 10:50] Integrated Multidisciplinary Assessment of Shaft Power Transfer in a UHBR Geared Turbofan
  Sara Alão, Christos Mourouzidis, Ioannis Roumeliotis, Pavlos Rompokos, Vassilios Pachidis
• [10:50 - 11:10] Engine-Aircraft Integrated Design for Hydrogen Propulsion, Application to a Family of Small to Medium Range Aircraft
  Benoit Said, Christos Mourouzidis, Pavlos Rompokos, Ioannis Roumeliotis, Mohamed Aly Abdel-Raheem
• [11:10 - 11:30] Assessment of Alternative Fuels and Tank Integration Across Aircraft Configurations
  Sergio Jimeno Altelarrea, Utkarsh Gupta, Christos Mourouzidis, Atif Riaz
• [11:30 - 11:50] Towards The Conceptual Design οf α Recuperated Rim-Driven Fan Concept
  Mavroudis Kavvalos, Rainer Schnell, Christian Tiedemann
• [11:50 - 12:10] CFD-Based Mission-Level Assessment of Powered Engine Installation Effects for Innovative Medium-Range Aircraft Propulsion
  Odysseas Ziogas, Spyridon Antoniou, Pericles Panagiotou
• [12:10 - 12:30] Preliminary Analysis of the Failure of Aircraft with new Propulsion System for the Purpose Maintenance
  Blessing Adetomiwa, Akinola Ayodeji, Kulkarni Manas, Johannes Zehnter, Marc Launer

• [10:30 - 10:50] The UNIC Project: Objectives, Methodology, and Current Progress
  Ortega I.K., Berthier A.1, Bilyarski D., Crova F., Smallwood G., Owen B., Bellouin N., Crayford A.5, Durand E., Duplissy J., Myllys, N., Rönkkö T., Olenius T., Brown A., Nichman L., Corbin JC., Jalal N.O., Saukko E., Ntziachristos L., Schripp T.
• [10:50 - 11:10] Constraining the impact of volatile particulate matter on contrail cirrus forcing estimates – an output of the A4Climate project
  Marc E. J. Stettler, Joel Ponsonby, Daniel Sauer, Johannes Schneider, Benjamin J. Murray, Jack Macklin, Alexander Vogel, Florian Ungeheuer, Julia David and Christiane Voigt
• [11:10 - 11:30] Environmental impact of a hydrogen-optimised multi-fuel propulsion system (HOPE Project)
  Feijia Yin, Clémentin Léron, Francesca De Domenico, Arvind Gangoli Rao, Benjamin Percival, Ling Lim,
  Adnan Muslić and Moritz G. Kolb
• [11:30 - 11:50] Latest findings from large passenger aircraft emission measurement campaigns and PACIFIC follow-on activities
  K. Seeliger, C. Renard, C. Voigt, G. Eckel, T. Grein
• [11:50 - 12:10] ESCAPE: A transportable contrail chamber
  Duplissy J, Koskenvaara H, Rantala P, Huuskonen U, Kolhinen V.S, Righi C, Elomaa T, Petaja T, Naukkarinen E, Dalmaso M, Berthier A, Ortega I.K
• [12:10 - 12:30] Open Discussion

• [10:30 - 10:50] Overview of AI methods and review of the current state of the art in space applications
  Mehmed Yüksel, Wiebke Brinkmann, Nayari Marie Lessa, Jonas Eisenmenger, Udo Frese
• [10:50 - 11:10] LunarCobot: Development of Servicing Modules for Multi Robot Operation Scenarios on the Lunar Surface
  Gewehr M., Al Barwani A., Ben Rajiba, Y., Cai D., Denz T., Gnilka L.-N, Kälble J., Kallis N, Koetting C., Lin X, Mallol M., Prang L., Sahli P., Sauerzapf R., Schaur J., Wagner H., Weismann S., Zimmermann Z., Klinkner, S.
• [11:10 - 11:30] Multi-Scenario Optimization of PID and Fuzzy Controllers for Astrobee Attitude Control
  Cristian Flores-Rodríguez, Ali Arshadi, Juan Carlos Crespo, María Royo, Karl Olfe
• [11:30 - 11:50] Inertial Parameter Identification for the NASA Astrobee Free-Flyer
  Ali Arshadi, Cristian Flores-Rodríguez, María Royo, Juan Carlos Crespo, Karl Olfe
• [11:50 - 12:10] Reference Scenario and Operational Concept definition for In Space Assembly and Manufacturing Platform
  Raphael Boissonnade, Nicola Guercio, Mathieu Deremetz
• [12:10 - 12:30] ASPERA – Autonomous Spacecraft Pose Estimation with Rendered and Augmented images: A robust VBN for Autonomous Spacecraft GNC in non-cooperative scenarios
  N. Andres, H. Fougereau, B. Martinez Borrell, R. Moreau, C. Quivet, J. Ramos Montilla

• [10:30 - 10:50] A data-driven method for smart wind tunnel testing planning
  Spinelli A., Kipouros T., Greenwell D.
• [10:50 - 11:10] Interface Design and Digital Twins for Dimensional Control in Composite Assemblies
  Kristina Wärmefjord, Rikard Söderberg, Diogo Toyoda
• [11:10 - 11:30] Data-driven multiscale modelling of buckling metamaterials for vibration mitigation and protection of airborne electronics
  Daniel Yago, Diego Abad, Oriol Lloberas-Valls, Javier Oliver, and Juan Cante
• [11:30 - 11:50] Determination of material model parameters for composite materials for aircraft structural design using machine learning
  Q. Abboud, F. Hähnel, J. Markmiller
• [11:50 - 12:10] Influence of 3D-Printed Mesh Energy Directors on Heat Generation in Ultrasonic Welding of Carbon Fiber-Reinforced LMPAEK Laminates
  Marta Juanatey Muradas, Mohsen Bahrami, Massimiliano Russenllo
• [12:10 - 12:30] Toward the industrialization of sequential ultrasonic welding for aerospace sector
  Mohsen Bahrami, Massimiliano Russello, Marta Juanatey Muradas, Enrico Chemello, Elena Senin Rodriguez

• [10:30 - 10:50] Bridging Recycling Technologies and Material Design: Vitrimers for Sustainable Epoxy Composites
  Liberata Guadagno, Raffaele Longo, Marialuigia Raimondo, Luigi Vertuccio, Rosamaria Russo
• [10:50 - 11:10] Reprocessability by Design: High-Performance Bio-Based Epoxy Vitrimers for Fiber-Reinforced Composites
  Liberata Guadagno, Francesca Aliberti, Luigi Vertuccio, Marialuigia Raimondo, Roberto Pantani, Raffaele Longo
• [11:10 - 11:30] Towards Smart Nylon: Electrically Responsive PA6 Composites for Aerospace Applications
  Guadagno L., Longo R., Aliberti F., Raimondo M., Catauro M., Vertuccio L.
• [11:30 - 11:50] Towards Greener Aeronautical Composites: The Promise of Electrocuring
  Liberata Guadagno, Roberto Pantani, Raffaele Longo, Luigi Vertuccio, Francesca Aliberti
• [11:50 - 12:10] From Waste to Resource: Green Chemical Recycling of Bio Based Epoxy Composites
  Lorenzo Bonadies, Elisa Calabrese, Pasquale Longo, Annaluisa Mariconda, Liberata Guadagno, Marialuigia Raimondo
• [12:10 - 12:30] Synthesis and development of inherently highly flame-resistant nylon for aerospace applications
  Veronica Balzano, Raffaele Longo, Liberata Guadagno, Pasquale Longo, Annaluisa Mariconda

• [10:30 - 10:50] Enabling End-to-End Aviation Impact Assessment through a Digital Collaborative Framework
  Andrea Mancini, Marko Alder
• [10:50 - 11:10] Operationalizing Impact Assessment Studies: from Study Definition to Implementation
  Thierry Lefebvre, Patrick Ratei, Andrea Mancini, Atif Riaz, Michel van Eenige and Alf Junior
• [11:10 - 11:30] Multi-Fidelity Aircraft Modelling for Integrated Impact Assessment of Technology R&I
  Atif Riaz, Sergio Jimeno Altelarrea, Christos Mourouzidi, Utkarsh Gupta, Felix Brenner, Patrick Ratei
• [11:30 - 11:50] Impact Monitor 2: Specification of preliminary impact-assessment studies for new aircraft technologies at Air Transport System and airport level
  Alf Junior, Michel van Eenige
• [11:50 - 12:10] Impact Monitor 2: Specification of preliminary impact-assessment studies of operational R&I
  Michel van Eenige, Alf Junior
• [12:10 - 12:30] Bridging Research and Education: The Impact Monitor 2 Academy
  Patrick Ratei

• [10:30 - 10:50] Innovation and Sustainability Efforts in Qatar Air Traffic Management and Hamad International Airport
  Bwalya Junior Chongo
• [10:50 - 11:10] Validation of HYCON Multi-Link Architecture for Resilient Surveillance
  Fadhil Firyaguna, Lena Kolb, Giancarlo Gelao
• [11:10 - 11:30] Environmental aspects at the Airport Operations Center: current state and future perspective
  Inbal Haas, Yves Günther, Jan Knichel, Oliver Pohling, Marcel Pulst
• [11:30 - 11:50] Multistatic Passive Radar for ATM Surveillance: a simulation study in relevant environments
  Alberto Arana Ragel, Martin Ummenhofer, Carla Menciotti, Alexandra Filip-Dhaubhadel, Diego Cristallini
• [11:50 - 12:10] AIrfield: Regulation-Aware AI-Assisted FOD Reporting in Airport Operations — A Zagreb Airport Case Study
  Koulalis I, Militsis N-M, Toumpas A, Xefteris V., Stipanovic I, Jurić M, Damjanović M, Quang T., Bushra Ν., Ioannidis K, Vrochidis S
• [12:10 - 12:30] Meteorological Operating Limitations for a Regional Air Mobility Network
  Tim Schunkert, Lukas Asmer, Nico Flüthmann, Wolfgang Grimme, Alexandra Leipold, Marc Gelhausen

• [13:30 - 13:50] Environmental impact assessment of a Fuel Cells Stack in ELECTROPLANE-TEC project
  Mario Antonio Solazzo, Lidia Travascio, Angela Vozella, Antonio Pagano
• [13:50 - 14:10] Environmental impact assessment of the innovative Long-Range Aircraft in EXAELIA project
  Mario Antonio Solazzo, Lidia Travascio, Angela Vozella
• [14:10 - 14:30] Life Cycle Data Management in Aviation: Attributional and Prospective LCA approaches – Example of an Aircraft Rudder Material and its Associated Data Gaps
  Peter Brantsch, Aude Marie Bechu, Sven Wuestenhagen, Ralf Schlimper, Alexis Laurent, Carl-Christoph Höhne
• [14:30 - 14:50] Screening Life Cycle Assessment of Bio-based Composite Access Panel for Trainer Aircraft: Environmental Hotspots and Future Circular Pathways
  Gyu-Eun Cho, Torsten Müller, Ahmed Mysara, Marvin Veil, Korhan Şahin
• [14:50 - 15:10] Economic and Environmental Feasibility of Hybrid-Electric Commuter Aircraft
  Chung-Huan Liu, Florent Lutz
• [15:10 - 15:30] Open Discussion

• [13:30 - 13:50] Fast Lane Drone Development: How Drone manufacturers can easily test their systems without the need of a specific category approval
  Jan-Frederick Schön, Paul David Lieten, Nadine Dörge, Yvonne Minnich
• [13:50 - 14:10] A Multi-Criteria Decision Framework for Operational Benchmarking and Capability Optimization of Unmanned Aerial Systems
  Stylianos Adamidis, Eleftherios Karatzas, Michail Karalis, Gavriil Gavriilidis, Nikos Monokrousos, Kyriakos Grammatikos
• [14:10 - 14:30] Connectivity-Constrained Risk-Aware Planning and Monitoring Framework for BVLOS UAS Operations
  Stefano Primatesta, Gianluca Scopelliti, Luca Testa
• [14:30 - 14:50] AltaRica for Small UAS Certification: A Model-Based Safety Analysis Approach to AEP-83
  Olivier Cornes, Tatiana Prosvirnova, Christel Seguin
• [14:50 - 15:10] Validation and Deployment Of RF and Remote ID Sensor Systems for Monitoring U-space Traffic
  Călin Andrei Badea, Dick Bouwhuis
• [15:10 - 15:30] A Microservice Architecture for UAM Fleet Control Stations in U-space Environments
  Enno Nagel, Sukhbir Singh, Miguel Angel Fás Millan

• [13:30 - 13:50] Preliminary Sizing, Performance and NOx Reduction Potential of a Hybrid, Hydrogen Gas Turbine Integrated with Solid Oxide Fuel Cells (FlyECO Project)
  Evangelia Pontika, Stefanie de Graaf, Jan Zanger, Daniel Ewald, Panos Laskaridis
• [13:50 - 14:10] Objective-Based Energy Management Strategies for Hybrid Electric Propulsion Systems
  Evangelia Pontika, Panos Laskaridis, Timos Kipouros
• [14:10 - 14:30] Operability Analysis and Control Structure Characterisation of a Gas Turbine SOFC Hybrid for Hydrogen-Fuelled Commuter Aircraft
  Muhammad Haad Shaikh, Evangelia Pontika, Argyrios Zolotas, Panagiotis Laskaridis
• [14:30 - 14:50] The design of a hybrid turbo-electric propulsion with fuel cells for a hybrid regional aircraft with a capacity of 80 passengers and a range of 1,000 km. An assessment of the effectiveness of integrating fuel cell with a hybrid propulsion system
  Maksym Kirichkov, Yurii Ulitenko, Igor Kravchenko
• [14:50 - 15:10] Low-temperature PEM fuel cell air supply system architecture optimization for regional aircraft
  F. Ascione, J. Biesheuvel, A.I. de Boer
• [15:10 - 15:30] High-Temperature PEM Fuel Cells for Hydrogen Aviation: Technology Evolution and Integration Perspectives
  Meriem Fikry, Lily Koops

• [13:30 - 13:50] Towards LES-Assisted Turbomachinery Design (SCI-FI-TURBO Project)
  Michael Bergmann, Georgios Goinis, Sutharsan Satcunanathan, Alexander Bleh
• [13:50 - 14:10] Numerical Modelling of Fluid-Structure Interaction on Wings and Aeronautical Structures in Realistic Conditions (FALCON Project)
  Denis Ricot, R. Jaeger, I. Cheylan, J. Jacob, R. Cuidard, Y. Detandt, J. Favier
• [14:10 - 14:30] Overview the EU ROSAS project: RObust simulation Systems exploiting AI based turbulence models and hight-fidelity algorithms
  Vincent Couaillier
• [14:30 - 14:50] Digital Twins of Composite Parts: Structure and Data Acquisition along the Life Cycle (TOSCA & COMPASS Project)
  Christian Eitzinger, Denis Krajnc, Manuel Ederer
• [14:50 - 15:10] Composing Digital Product Passports to Support Remanufacturing in Aviation (COMPASS Project)
  Julian de Marchi, Erik Baalbergen, Annemoon de Groen, Anne van Vught
• [15:10 - 15:30] Circular recycling of thermoplastic composite laminates (CompSTLar Project)
  M. Wilms, K. Satish, S. Herkströter, Dr. H. Janssen, Prof. Dr. C. Brecher

• [13:30 - 13:50] Environmental impact of large constellations using the space debris THEMIS indicator
  Michahelles M., Muciaccia A., Lück D., Retagne W., Colombo C.
• [13:50 - 14:10] A Preliminary Requirements-to-Design Framework for Circular Satellite Systems
  T. Kalampoukas, D. Markatos, A. Filippatos
• [14:10 - 14:30] Toward Circularity in Space: Evaluating and Operationalizing the Circular System Framework for Satellite Reuse
  Bernd Michael Weiss, Mohamed Elnourani, Anna Öhrwall Rönnbäck, René Laufer
• [14:30 - 14:50] Solar-Cycle Effects on Satellite Disposal Compliance in Low Earth Orbit
  Divya Manivannan
• [14:50 - 15:10] An Optimization Framework for the Conceptual Design of Hybrid Microsatellite Launch Vehicles with Environmental Assessment
  Girolamo Musso, Iara Figueiras, Alain de Souza, Frederico Afonso, Fernando Lau
• [15:10 - 15:30] Managing Requirements Uncertainty in Early-Phase Spacecraft Design: An Expert-Informed Approach to Design-for-Spacecraft-Reuse
  Bernd Michael Weiss, Anna Öhrwall Rönnbäck, René Laufer

• [13:30 - 13:50] A Holistic Sustainability Framework for Early-Stage Aircraft Conceptual Design Using Bayesian Networks
  D. Markatos, T. Kipouros, A. Spinelli, A. Filippatos
• [13:50 - 14:10] Adaptive Test Prioritization for Drone Communication Software: A Constrained Bayesian Contextual Bandit Approach
  Guillemette Clouzeau, Joan Kamurali, Samuele Ramello, Morten Larsen
• [14:10 - 14:30] Evaluation of Data Driven Architectures for Virtual Thermal Sensing in Brushless Motors Using Fiber Bragg Grating Sensors
  Brett Schaus, Antonio Costantino Marceddu, Matteo Bertone, Alessandro Aimasso, Bartolomeo Montrucchio, Paolo Maggiore, Matteo Davide Lorenzo Dalla Vedova
• [14:30 - 14:50] Dynamic Modulation Switching and Real-Time Kalman Filtering for Airborne RSSI-Based Localization in High-Power Rocketry Missions
  Dimitri Agostino Carrer, Kyriakos Koutsoukis, Antonis Kyvellos, George Chatzopoulos, Anna Christina Markaki, Konstantinos Drakakis, Maria Roupina
• [14:50 - 15:10] Review of Data-Driven Surrogate Models for Structural Analysis of Mounting Systems for Electrified Aero Engines
  Patrick Y. Schmiede, Lukas Richter, Stefanie de Graaf
• [15:10 - 15:30] Data-Driven Calibration of GEKO Turbulence Model Coefficients for Transonic Aerodynamic Flows
  Nicolò Piersanti, Andrea Ferrero, Viola Rossano, Joel Guerrero

• [13:30 - 13:50] Experimental investigation of the aerodynamic performance increase of an A320 morphing wing prototype in subsonic regime
  Abou Khalil J., Asproulias I., Maynard N., Delon X., El Akoury R., Harran G., Doll C., Rouchon J-F., Braza M.
• [13:50 - 14:10] Aerodynamic performance increase through numerical simulation of a morphing A320 wing prototype in transonic regime
  Abou Khalil J., Asproulias I., Marouf A., Maynard N., Delon X., El Akoury R., Hoarau Y., Rouchon J-F., Braza M.
• [14:10 - 14:30] Numerical study of travelling and standing wave morphing on an A320 wing prototype in subsonic regime at Reynolds number of 1 million
  El Akoury R., Asproulias I., Maynard N., Delon X., Abou Khalil J., Marouf A., Hoarau Y., Rouchon J.F., Braza M.
• [14:30 - 14:50] Numerical analysis of embedded actuators effects on an A320 morphing wing prototype for aerodynamic performance enhancement
  R. Gauthier, Y. Hoarau, A. Marouf, M. Braza, J. Vos
• [14:50 - 15:10] Experimental and numerical study of a morphing a high-lift wing-flap configuration through a system of actuators forming a “live-skin”
  X. Delon, J. Abou Khalil, N. Maynard, A. Marouf, Y. Hoarau, Jean-François Rouchon, M. Braza
• [15:10 - 15:30] Machine-Learning-based Reduced-Order modelling of a travelling wave morphing system on an A320 wing prototype
  Maynard N., Marouf A., El Akoury R., Abou Khalil J., Hoarau Y., Rouchon J.F., Braza M.

• [13:30 - 13:50] Innovative Fuselage Structural Concepts for the Integration of Hydrogen Technologies into Regional Aircraft
  Ana Sánchez Algarra, Deborah Neumann de la Cruz, María Rodríguez-Montes
• [13:50 - 14:10] Innovative Floor Structure Concepts and Enabling Technologies for the Integration of Hybrid-Electric Regional Aircraft
  Marc Mineur, Bob Everaert, Tom De Baere, Steven Van Camp, Rashad Fiaz
• [14:10 - 14:30] Topology optimization of aircraft fuselage frame
  Bartosz Radej, Rafał Żurawski
• [14:30 - 14:50] Manufacturing Strategy for an Integrated Composite Fuselage Lateral Panel with one-shot Liquid Resin Infusion
  Eneritz Cereza, Peio Olaskoaga, Maialen Garaigordobil
• [14:50 - 15:10] Data-Driven Models for Aeronautical Design and Optimization
  Gonzalo Rubio, Fermín Gutiérrez, Miguel Jaráiz, Ángel Ladrón, David Ramos, Miguel Sánchez-Domínguez, Nicolás Becerra-Zúñiga, Marta Arnabat-Martín, Andrés Mateo-Gabín, Sven A. Lanzan Ferran, Javier Rozalén, Fernando R. Sánchez, Lucas Lacasa, Eusebio Valero
• [15:10 - 15:30] Open Discussion

• [13:30 - 13:50] Advanced conflict resolution algorithms and operational scenarios in ASAS simulator
  Catalin Nae, Ana-Maria Bordei, Mihnea Diței
• [13:50 - 14:10] Simulation-Based Assessment of TBO and xCAS Concepts
  Sandra Nichifor, Catalin Iordache, Alexandru Dobrescu, Catalin Nae
• [14:10 - 14:30] Air risk assessment for long-range UAS operations under U-space
  Patrick Le Blaye, Christel Seguin, Tatiana Prosvirnova, Sergio Pizziol
• [14:30 - 14:50] Flight Dynamics and Control of a UAS Trajectory on an Aerial Roundabout for Structured Urban Traffic
  Ana-Maria Bordei, Florentin Șperlea
• [14:50 - 15:10] Real-Time Distributed Client–Server Simulation for Trajectory Management of UAS in a Structured Urban Airspace Network
  Ana-Maria Bordei, Florentin Șperlea
• [15:10 - 15:30] Automatic Unmanned VCA Operations in Mixed Airspace Environment: the Case of OPERA Project
  Boyan Iliev, Marko Radanović

• [16:00 - 16:20] Switching Jet Actuators for Separation Control on Lifting Surfaces
  Julien Weiss, Stephan Löffler, Thomas Grund, Jérôme Delva, Luka Porenta, Jernej Drofelnik
• [16:20 - 16:40] Piezoelectric Synthetic Jet Actuator embedded in aircraft wingtip for stealth application
  A. Barnique, G. Aigouy, E. Eglinger, J. Delva, F. Ternoy, J. Roháč, D. Ferris, G. Mansuy
• [16:40 - 17:00] High power electronics for synthetic jet actuators
  Jan Rohac, Vitalij Velicko, Ales Honomichl
• [17:00 - 17:20] Wind tunnel test results of active flow control on an aileron
  Julien Dandois, Colin Leclercq, Vianney Nowinski
• [17:20 - 17:40] Flight Test Demonstration of Active Flow Control Using Switching Jet and Synthetic Jet Actuators for Control Augmentation and Drag Reduction in FACELIFT
  Jernej Drofelnik, Luka Porenta, Julien Dandois, Colin Leclercq, Jan Rohac, David Ferris, Julien Weiss
• [17:40 - 18:00] Towards Practical Aircraft Applications of Active Flow Control: Aircraft-Level Trade-Offs and Integration Feasibility in FACELIFT
  Miha Zupanič, Jernej Drofelnik, Julien Dandois, Colin Leclercq

• [16:00 - 16:20] AI-enabled control architectures for autonomous piloting of unmanned aircraft systems
  Tamas Szakacs
• [16:20 - 16:40] Human–AI mission interaction for autonomous pilots of unmanned aircraft systems through multimodal language models
  Tamas Szakacs
• [16:40 - 17:00] Control of Multirotor with Slung Load Using Deep Reinforcement Learning
  Giulio Avanzini, Fabio Polese, Alessandro Zavoli, Guido De Matteis
• [17:00 - 17:20] Neuro-Adaptive Tactical Path Planning for Fixed-Wing UAVs in Terrain- and Threat-Constrained Environments
  Bengisu Yücel, Mehmet Önder Efe
• [17:20 - 17:40] Controllability Assessment of a Tiltrotor VTOL under Single Actuator Faults
  Fabian Sion, Mark Henkenjohann, Udo Nolte, Christian Henke, Ansgar Trächtler
• [17:40 - 18:00] Model Based System Synthesis for the preliminary design of a multirotor drone
  Pierre-Alain Yvars, Laurent Zimmer

• [16:00 - 16:20] Dynamic Analysis of Double-helical Planetary Gearboxes using Multi-Body Simulation
  Gieger P., Krämer Ph., Weigand M.
• [16:20 - 16:40] Preparation and testing of the gearbox, which combines the output power of the GTE and the electric engine to drive the air propeller of a hybrid turbo-electric propulsion
  Sergiy Dmytriyev, Andriy Yedynovych, Igor Kravchenko
• [16:40 - 17:00] Design and Validation of a Battery Module for High-Power Aeronautical Applications
  Martin Macak, Ziga Kreuzer, Helmut Kühnelt
• [17:00 - 17:20] Assessment of floating bus voltage on a cycle-integrated SOFC gas turbine hybrid
  Raoul D. Böck, Florian Winter, Arturo Carboné Mejías, Mirko Hornung
• [17:20 - 17:40] Potential to increase roll authority using differential thrust in a distributed electric propulsion aircraft under actuator and propulsion failure
  T. Sachtleben Dahmann
• [17:40 - 18:00] EProNS – An Electric Propulsion Network Simulation Module for GTlab
  Victor J. Bahrs, Katharina Kolo, Jonas Ludowicy, Stefanie de Graaf

• [16:00 - 16:20] Pushing Fibre Reinforced Polymer Inline Inspection Speeds to the Next Level (TOSCA Project)
  Manuel Ederer, Lukas Hartung, Mula Naveen Kumar, Pravin Luthada, Khang Nguyen, Christian Eitzinger
• [16:20 - 16:40] Enhanced Surface Defect Segmentation of Carbon Fiber Materials Using Photometric Stereo Imaging (COMPASS Project)
  Abhiram Kolli, Riccardo Fazzi, Denis Krajnc, Christian Eitzinger
• [16:40 - 17:00] Laser assisted AFP process monitoring towards real-time properties prediction (CompSTLar Project)
  Beatriz Gomes, Mario Fernandez-Pedrera, Pablo Romero-Rodriguez
• [17:00 - 17:20] Leveraging Photonics for the Digitalisation of Composite Manufacturing: The PLEIADES Approach
  H. Zervos, G. Syriopoulos, C. Haliotis, T. Prousalidi, H.K. Kannojia, J. Missinne, G. Poulopoulos, H. Avramopoulos
• [17:20 - 17:40] Welding of Vitrimer-Based Composites in the TOSCA Project: Influence of Degree of Cure on Joint Performance and Processability (UPBEAT Project)
  Enrico Chemello, María Ivette Coto Moretti, Massimiliano Russello
• [17:40 - 18:00] Evaluating part quality using melt pool signals in a commercial PBF-LB system (UPBEAT Project)
  Macallister N., Mellemseter S., Simmen K., Grønnerød S.

• [16:00 - 16:20] Development of an optimization model for fission-based space nuclear power systems
  Fares M, Boissonnade R, Roser X, Lacambre J-M
• [16:20 - 16:40] Development of a refractory tile for a reusable launcher
  Marie Busquet, Marc Singlard, Julien Garcia
• [16:40 - 17:00] Forecasting the Ionospheric Activity for Space Surveillance Purposes using Deep Learning Techniques
  D. Alexandre, N. Bhuyan Mathew
• [17:00 - 17:20] Multidisciplinary Conceptual Design Framework for Reusable Space Vehicles with Re-Entry and Servicing Capability
  Iara Figueiras, Girolamo Musso, Alain de Souza, Frederico Afonso, Fernando Lau
• [17:20 - 17:40] Visibility-Constrained Pruning for Rapid Tasking in LEO Earth Observation Constellations
  Yifan Cai, Camilla Colombo
• [17:40 - 18:00] Development and Validation of a Three-Axis Magnetorquer System for 3U CubeSat
  Abdurrahim Muratoglu, Berke Yazici, Gözde Şener, Mehmet İlbağı, Gülce Tuzcu, H. Ersin Söken

• [16:00 - 16:20] Accelerating the Development of Hybrid-Electric Regional Aircraft: a SysML v2 Environment for Digital Design and Verification
  Francesco Torrigiani, Jasper Bussemaker, Sparsh Garg, Carlos Cabaleiro, Fabien Retho, Olexiy Kupriyanov, Klara Ziegler Juan Manuel Lorenzi, Jean-Marie Gauthier, Jean-Christophe Giret, Vito Primavera
• [16:20 - 16:40] Open Digital Platform: Connecting multiple domains and tools to support Digital Engineering Workflows
  Fabien Retho, Klara Ziegler, Elias Allegaert, Olexiy Kupriyanov, Philippe Barabinot, Sparsh Garg, Jasper H. Bussemaker, Vito Primavera, Andrea Terracciano, Pierpaolo Borrelli
• [16:40 - 17:00] A Git-based Collaborative Engineering Platform for MBSE using SysML v2
  Jasper H. Bussemaker, Carlos Cabaleiro, Jonas Jepsen, Marko Alder, Sparsh Garg, Marcel Mischke, Aprajita Kain, Erwin Moerland, Luca Boggero, Björn Nagel
• [17:00 - 17:20] Integration of Model-Based Design and Surrogate-Based Multi-disciplinary Design and Optimization into a Dynamic Simulation Framework for Thermal Management Systems
  Andrea Mameli, Francesco Torrigiani, Sparsh Garg, Nicole Viola, Carlos Cabaleiro de la Hoz
• [17:20 - 17:40] Integrated digital platform for aircraft engine’s parts life cycle management
  Jakub Broniszewski, Katarzyna Frydrycka-Zabadaj, Dariusz Oracz
• [17:40 - 18:00] How to improve the “Digital Assistant (DA) – Pilot interaction” design process
  Yuk Shan Cheung, Tom van Birgelen, Rolf Zon, Jeroen van Rooij, Barry Kirwan

Workshop

• [16:00 - 16:20] Conceptual Design of an Integrated Monoblock Composite HTP for Next-Generation Regional Aircraft
  Antonio Gabriele Sodano, Domenico Cristillo, Davide Lucariello, Angelo D’onofrio, Michele Ciccone, Gaetano Maffettone, Almerigo Pantalone and Antonio Chiariello
• [16:20 - 16:40] Morphing Elevator Aero Design Applying Evolutionary Algorithm-Based Optimization and Radial Basis Functions
  Romano D. G., Minervino M., Quagliarella D.
• [16:40 - 17:00] Optimization of a Horizontal Tail Plane under Longitudinal Stability Constraints
  Eric Schaar, Marco Fila Robattino, Lars Reimer, Ögmundur Petersson
• [17:00 - 17:20] Investigation of novel energy systems structural integrators in regional aircraft
  Gyftos Panagiotis, Lampeas George, Giakoumelos Gkikodimas Dionysis
• [17:20 - 17:40] Structural Assessment and Pressurization Challenges of Unconventional Non-Circular Fuselage Sections for Hybrid-Electric Regional Aircraft: A HERFUSE Project Case Study
  Santonicola F., Atalarico S., Nardone M., Graziano M., Pezzella C., Negro A.
• [17:40 - 18:00] Open Discussion

• [16:00 - 16:20] Assessment of Powerplant Technology KPI Deviations on the Conceptual Design of Hydrogen Fuel Cell Short-Range Aircraft
  Mario Di Stasio, Fabrizio Nicolosi
• [16:20 - 16:40] Wind Tunnel Validation Experiment of a Cooling Line with a Simulated HEX Device under Real Operating Conditions
  Daniel Kessler, Jonas Grubert, Florian Schmidt, Dirk Soggeberg, Sebastian Merbold, Jens Friedrichs
• [16:40 - 17:00] CFD Validation of an Operating Propeller Engine with Dual Cooling Ducts
  Dirk Soggeberg, Florian N. Schmidt, Prabhjot Singh, Ralf Rudnik
• [17:00 - 17:20] FAME - LH2 Storage System Qualification
  W. Schimpl, M. Huber, D. Hammer
• [17:20 - 17:40] Development for a fuel cell stack for aeronautical applications
  Meissel H.
• [17:40 - 18:00] Aircraft electric powerline system architecture topology choice & optimization
  M.McClelland, D.Prieto

• [11:00 - 11:20] Evaporative Cooling with Fogging for Thermal Management of Hydrogen–Electric Aircraft Propulsion
  Bernhard Gerl, Matthias Ronovsky-Bodisch, Niccolò Ferrari, Martin Berens
• [11:20 - 11:40] Parametric Comparison of Heat Dissipation Architecture for Fuel Cell Electric Aircraft
  Matthias Ronovsky-Bodisch, Niccolò Ferrari, Bernhard Gerl, Martin Berens
• [11:40 - 12:00] Integration of Compact Plate-Fin Heat Exchanger in a Ducted Fan Propulsion Systems for Hydrogen–Electric Aircraft
  Niccolo’ Ferrari, Matthias Ronovsky-Bodisch, Bernhard Gerl, Martin Berens
• [12:00 - 12:20] Fuel Cell Thermal Management – overcoming high heat loads without oversizing heat exchangers
  DI Christopher Gross, Philipp Jordan, DI Lorenz Braumann, DI Matthias Ronovsky-Bodisch
• [12:20 - 12:40] Rethinking Fan Design: The Case for Low-Mach Integration with Heat Exchangers
  Mavroudis Kavvalos, Eleni Pantermaraki, Rainer Schnell
• [12:40 - 13:00] Recirculation-Assisted Surface Engineering of Complex AM Heat Exchangers in Aerospace Applications
  M.Belen García-Blanco, Virginia Sáez de Viteri, Olaia Ortiz, Amaya Garcia-Casas, Asier Salicio

• [11:00 - 11:20] Why One Battery is Not Enough: Architecture-Driven Optimisation of Propulsion, Non-Propulsion and Reserve Energy Systems in Future Single-Aisle Aircraft
  Andreas Battenberg, Markus Meindl, Martin Wenger, Florian Hilpert
• [11:20 - 11:40] On the Existence of Long-Range Hydrogen-Powered Transport Aircraft
  Moschetta JM., Jan R.
• [11:40 - 12:00] Implementation of a higher fidelity electrical propulsive chain in the frame of a hybrid regional aircraft multidisciplinary design analysis
  Léa Zanardi, Didier Brousset-Matheu, Nathalie Bartoli, Emmanuel Benard, Valérie Pommier-Budinger, Sébastien Defoort, Alessandro Sgueglia
• [12:00 - 12:20] Design, performance and modelling of an electrical system for a hybrid GT-SOFC propulsion system for commuter aircraft
  Caihong Liu, Evangelia Pontika, Panagiotis Laskaridis
• [12:20 - 12:40] Modelling and Optimization of a UAV Parallel Hybrid-Electric Propulsion System
  Rita Soares de Pinho, João Fernandes, Vasco Coelho
• [12:40 - 13:00] Operational Readiness Of Short Range Hybrid Electric Aircraft Under Energy, Charging And Thermal Recovery Constraints
  Divya Manivannan

• [11:00 - 11:20] A Mission-Level Simulation Framework for Integrated Thermal Management of Hybrid-Electric Aircraft Power Systems
  Tobias Reischl, Corentin Lepais
• [11:20 - 11:40] System Modelling and Simulation of an Integrated Thrust Recovery System with an Outflow Valve for Next Generation Hybrid Electric Regional Aircraft
  Siwei Cai, Tasos Karageorgiou, Jeong Hoon Heo, Michael Moeller, El Hassan Ridouane
• [11:40 - 12:00] Development and Assessment of Thermal Management System for Hybrid-Electric Propulsion Applications within the ETHAN1 Project
  Karunakar Reddy Konda, Akilan Mathiazhagan, Dikshant Sharma, George L.R. Vegini, Majid Asli, Klaus Höschler
• [12:00 - 12:20] Influence of Ram Air Channel Cooling Capability and Associated Drag on Fuel Cell Operation and Aircraft Mission Performance
  Silvan Keim, Raphael Gebhart
• [12:20 - 12:40] HyPoTrade: Modelling and Simulation of a Two-Phase Mechanically Pumped Loop for Fuel Cell Waste Heat Recovery
  Sam W. Deckers, Arne K. te Nijenhuis, Johannes van Es
• [12:40 - 13:00] Development of PHM Concept for HERA Thermal Management System
  David Fuentes Aguilar, Radek Hedl

• [11:00 - 11:20] High-Flow Liquid Hydrogen (LH2) Refuelling for Aviation: Preliminary Results and Technical Developments from the GOLIAT Project
  Jean-Christophe Hoguet, Peter Calvert, Lukas Steiger, David Ascic
• [11:20 - 11:40] An Assessment of Turnaround Time, Logistic and Safety Distances for LH2 refuelling in Airport (ALRIGH2T Project)
  Francesco Mastropierro, Gianvito Apuleo, Damiano Tormen, Ida Hjorth, Matteo Giampaolo, Alessia Angiolini, Daniele Santini
• [11:40 - 12:00] Modeling and Optimization of Airport LH₂ Dispensing Unit Fleets (GOLIAT Project)
  Samy Ben-Othman, Christophe Corre, Stephane Aubert, Germain Hurtado
• [12:00 - 12:20] LH₂ supply-cost uncertainty for H2-powered aviation: European airport case studies (GOLIAT Project)
  Timo Schelm, Finn Schenke, Astrid Bensmann, Richard Hake-Rauschenbach
• [12:20 - 12:40] Uncertainty-Aware Cryogenic Hydrogen Tank Design Optimization for Regional Turboprop Aircraft (DEMOQUAS Project)
  Georgios S. Arvithis, Konstantinos Bollas, Vasilis G. Gkoutzamanis, Francesco Montomoli, Anestis I. Kalfas
• [12:40 - 13:00] A Validated Computational Framework for Cryogenic Tank Filling (DEMOQUAS Project)
  Nikolaos Makrygiannis, Georgios S. Arvithis, Vasilis G. Gkoutzamanis, Anestis I. Kalfas
• [13:00 - 13:20] An Experimental Two-Dimensional Tank Study of Sloshing Dynamics (HASTA Project)
  Tiziano Pagliaroli

• [11:00 - 11:20] Jet fuel production via hydrothermal liquefaction of agricultural residues: Economic and environmental performance
  Leonard Moser, Christina Penke, Valentin Batteiger
• [11:20 - 11:40] Sustainable Aviation Fuel from Sunlight and Air: Progress and Perspectives
  Moritz-Alexander Thiel, Christoph Falter, Max Pargmann, Peter Schwarzbözl, Heider Hussain, Barbara Bohlen, Valentin Batteiger, Andreas Sizmann
• [11:40 - 12:00] Investigation report on SAF application strategies of major European aircraft manufacturers
  Eulalia Tomas Nadal, Javier Cubas, Gustavo Alonso
• [12:00 - 12:20] Digital Twin-Based Geometric Optimization of Gas Turbine Combustors for Sustainable Aviation Fuels
  Doğa Kılıç, Melih Yıldız
• [12:20 - 12:40] Integration of a multi-stack fuel cell system controller based on an aviation-relevant real-time operation system
  Milan Lieser, Cornelie Bänsch
• [12:40 - 13:00] Weight Reduction in Aviation Battery Systems Through Uncertainty-Aware Modeling Within Specified Safety Levels
  Jenny Morisho, Martin Wenger, Matthias Hessmann, Simon Holz, Javier Marco-Gimeno, Thomas Eberle, Vicent Lorentz

• [11:00 - 11:20] Application of Open Digital Platform to the Design and Verification of Hybrid-Electric Regional Aircraft
  Andrea Terracciano, Pierpaolo Borrelli, Ciliberti Danilo, Allegaert Elias, Francesco Torrigiani, Gerardo Carbonaro, Vito Primavera, Alfredo Renzetti, Fabien Retho, Novella Saccenti
• [11:20 - 11:40] Automated Validation and Verification in Aircraft Design: Integrating MBSE and MDO
  Simone Mancini, Tim Klaproth, Jean-Christophe Giret, Sylvain Béchet, Joaquín García Ordóñez, Maria Roncero Ruiz, Jasper Bussemaker
• [11:40 - 12:00] Open Digital Environment integrating Systems into Preliminary Aircraft Mission Simulation and Optimization
  Reinhold Maierl, Klara Ziegler, Robert Marcenco, Ögmundur Petersson, Roland Wüchner
• [12:00 - 12:20] Evaluation of Flight Systems by Interfacing FMI based Co-Simulations with the Aircraft & System Design through SSP
  R. Zimmermann, A. Schäfer, J. Jepsen, R. Mali
• [12:20 - 12:40] Virtual and Connected Testing of Hybrid Electric Networks
  Christian Schyr, Franz Diwoky
• [12:40 - 13:00] Model-Based Systems Engineering for Early Zonal Hazard Identification in Aircraft System Design
  Ayush Kamboj, Yicheng Sun

• [11:00 - 11:20] The Impact of Additive Manufacturing in the Aerospace Industry: Challenges and Opportunities
  Teresa Morgado
• [11:20 - 11:40] Geometry-Driven Hexagonal Extrusion for Enhanced Mechanical Response in PEI-Based Material Extrusion
  Ramazan Yüksel, Mehlika Ahsen Eldemir Merve Karabal, Alptekin Yıldız
• [11:40 - 12:00] Residual stresses evaluation in cold spray process using digital image correlation
  Abouhamzeh M., Stamoulis K.
• [12:00 - 12:20] Effect of Printing Parameters on the Electrical Resistance of FFF-Printed Piezoresistive Sensors Based on PEI/CNT/CB Composite Filament
  Ramazan Yüksel, Mehlika Ahsen Eldemir, Merve Karabal, Alptekin Yıldız
• [12:20 - 12:40] Validation of the MUVAX Industrial Concept and FSW Technology Solutions for Fuselage Longitudinal Joints: Results from MRL4 Trials
  Marco Pacchione
• [12:40 - 13:00] - 

• [11:00 - 11:20] Battery System Development to Empower Electrified Aviation Within OST4AVIATION
  Florian Franke, Alperen O. Altun, Maurice L. Dörnte, André Vetterlein, Stefan Kazula
• [11:20 - 11:40] Efficient Preliminary Design and Analytical Pre-Dimensioning of Design-Space-Adapted Hydrogen Pressure Tanks for Future Fossil-Free Aviation at the Example of a Cessna 172N
  Sebastian Spitzer, Edwin Zimmerman, Alexander Koepp, Chris Fischer, Johannes Markmiller, Maik Gude
• [11:40 - 12:00] Model based approach to optimize air stoichiometry and operating pressure for a PEM fuel cell based propulsion system of a four seater aircraft
  Mücahit Akkaya, Dieter Peitsch
• [12:00 - 12:20] Investigation of CO2-neutral propulsion concepts in the preliminary design for a general aviation aircraft
  Johanna Haug, Annika Staats, Andreas Bardenhagen
• [12:20 - 12:40] Performance Analysis and Testing of a Fuel Cell for the Electric Propulsion System of a WB-2 “Miss Columbia” Scaled Demonstrator
  Jose Chamorro, Patrick Schmiede, Lukas Richter, Sebastian Merbold, Chetan Kumar Sain, Ilja Koch, Stefanie de Graaf, Stefan Kazula
• [12:40 - 13:00] Sensitivity of a fuel-cell battery hybrid energy system to commuter aircraft mission profile parameters
  Pascal Albrecht, Lukas Schnörer, Dominik Murschenhofer

• [11:00 - 11:20] Reliability-based Overall Aircraft Design using GEMSEO
  Matthias De Lozzo, Nicolas Roussouly, Olivier Sapin
• [11:20 - 11:40] Surrogate-accelerated co-design of wing and active flutter controller under CS-25 and uncertainty
  Carlos Sosa Henríquez, Joseph Morlier, Sigitas Kilikevičius
• [11:40 - 12:00] Preliminary Sizing of Multirotor Platforms for Optimal Mission Planning
  Giulio Avanzini, Emanuele L. de Angelis, Daniele Fattizzo, Fabrizio Giulietti
• [12:00 - 12:20] A Low-Fidelity Model of Fighter Aircraft Operating Costs
  Erick Espinosa-Juárez, Petter Krus
• [12:20 - 12:40] A data model centered MDO discipline integration in GEMSEO applied to industrial conceptual aircraft design
  François Gallard, Fabian Castaneda, Gilberto Ruiz Jimenez, Antoine Dechaume, Julian Bardin, Antoine DeBlois
• [12:40 - 13:00] Hybrid physics-based and operations-aware ML surrogate for spacecraft life support systems
  Christian Mayer, Leonard Brandstetter, Claas Olthoff

• [14:00 - 14:20] LH₂ Tank Demonstrator Design, Manufacturing and Assembly
  D. Cimadevilla, D. Arrebol, D. Berends, D. Rodríguez, E. C. Lope, E. Fernández de Bobadilla, J. Ortega, J. Martínez, J. Martín, J. Morales, M. del Carmen Gutirriez, V. Simion
• [14:20 - 14:40] Experimental validation of a LH2 tank Thermo-fluidic Digital Twin
  Carles Oliet, Marcial Mosqueda-Otero, Eugenio Schillaci, Jesús Castro
• [14:40 - 15:00] An Attempt at Validation of Means of Compliance (MoC) for the Permeability of LH2 Tank Wall Materials
  A. B. Horvat, G. Dreossi
• [15:00 - 15:15] The Representativeness of Helium for LH2 Tank Permeability Testing: A Comparative Study
  G. Dreossi, A. B. Horvat
• [15:15 - 15:30] Assessment of Structural and Leakage Behavior of Gasketed Bolted Flange Joints for Cryogenic Applications
  George Tzoumakis, Stavros Valilis, George Lampeas, Spiros Pantelakis
• [15:30 - 15:45] Development of a Comprehensive Testing Infrastructure for Cryogenic Liquid Hydrogen Technologies in Aviation: Safety, Loading, and Performance Validation
  Vivancos G, Carpio A, Mundo I, Fernandez S, Vilar J, Nel-lo M, Parera M
• [15:45 - 16:00] Integrated SHM and Leak Detection Architecture for Composite LH₂ Aircraft Tanks
  Saupe R., Ciminello M., Shaporin A., Brindisi A., Ameduri S.

• [14:00 - 14:20] Transient operation of a multi-stack fuel cell system for hybrid-electric regional aircraft
  Cornelie Bänsch, Kai Sommer, Oliver Thalau
• [14:20 - 14:40] Sizing and integration of HT-PEMFC and thermal management systems on a 19-pax aircraft featuring a hydrogen-powered hybrid-electric powertrain
  Marco Garutti, Simone Sandrin, Sergio Machado, Lorenzo Mazzei, Askin Isikveren
• [14:40 - 15:00] Optimization Potential of Altitude-Adaptive Control Strategies for PEMFC Systems
  Jonas Settele, Dominik Murschenhofer
• [15:00 - 15:20] Scalable Integrated Power Electronics for Fuel Cell Regional Aircraft
  Markus Meindl, Florian Hilpert, Bernd Eckardt
• [15:20 - 15:40] Enhancing Reliability of Electric Aircraft Power Systems: A Study on Silicon Carbide and Gallium Nitride Power Devices Under Radiation Exposure
  Arijit Sengupta, Kurt Gnerlich, Ilja Koch, Stefan Kazula
• [15:40 - 16:00] Heat exchanger for the hydrogen engine fuel system
  Illia Petukhov, Taras Mykhailenko, Oleksii Lysytsia, Artem Kovalov

• [14:00 - 14:20] Reduced-Pressure Evaporation for Improved Thermal Management Performance of Fuel-Cell-Powered Aircraft
  Raphael Gebhart, Felix Ladwein, Tim Burschyk, Philip Balack
• [14:20 - 14:40] Integrated Modelica Modeling and Simulink Control Development of a Heat Exchanger System for Fuel Cell Propulsion (HEROPS Project)
  Siwei Cai, Amine Er-Raji, Grzegorz Kruczek, Changmin Cao, Vassilios Tsachouridis, El Hassan Ridouane
• [14:40 - 15:00] Test results of a 150kW Direct Water Evaporation Demonstrator for Improved Fuel Cell Thermal Management in Aerospace Applications
  Tim van de Weijer, Johannes van Es, Raphael Gebhart
• [15:00 - 15:20] Impact of Puller Fan Integration on the Design and Off-Design Performance of a Hybrid-electric Fuel Cell Aircraft Thermal Management System (TheMa4HERA Project)
  Angel Garmilla Manzano, Philip Balack, Raphael Gebhart
• [15:20 - 15:40] Loss Mechanisms and Efficiency Limits in Fuel Cell Ram Air Cooling Channels: Diffusers, Heat Exchangers, and the Meredith Effect
  Raphael Gebhart, Silvan Keim, Julius Wildeboer, Andreas Lesser
• [15:40 - 16:00] Rear-Fuselage Integrated Surface Heat Exchanger for Fuel Cell Cooling in Regional Aircraft
  Tom-Soeren Stumpp, Ulrich Carsten Johannes Rischmüller, Arturo Carboné Mejias, Mirko Hornung

• [14:00 - 14:20] HESTIA: Hydrogen combustion in aeroengines (HESTIA Project)
  Marc Truscelli
• [14:20 - 14:40] Integrated power and propulsion system based on hydrogen gas turbine and SOFC for clean aviation (FlyECO Project)
  Stefanie de Graaf, Panagiotis Laskaridis, Mauro Salazar, Mario L. Ferrari, Jan Zanger, Frederic Tong-Yette
• [14:40 - 15:00] Demonstration of Novel Kerosene-H2 Multi-Fuel Combustor (HOPE Project)
  Kaushal Dave, Alam Garciduneas-Correa, Lorenzo Palanti, Lorenzo Mazzei, Cosimo Bianchini, Arvind Gangoli Rao, Francesca De Domenico
• [15:00 - 16:00] Open Discussion

• [14:00 - 14:20] From General Aviation to Regional and SMR, evaluation of novel architectures and technologies for low-carbon air transport using the FAST-OAD aircraft design software
  S. Defoort, E. Nguyen Van, E. Stragiotti, R. Parello, F. Lutz, S. Delbecq, E. Benard
• [14:20 - 14:40] Multifidelity overall aircraft design of a LH2-Powered Strut-Braced Dry-Wing Aircraft using surrogate models and design of experiments
  R. Parello, E. Stragiotti, S. Defoort, E. NGuyen Van, C. Julien, L. Vertonghen, C. Mollet, M. Méheut, D. Losada Costoso, F. Moens, O. Atinault, G. Starck
• [14:40 - 15:00] LH2-Powered Strut-Braced Dry-Wing Aircraft: Aero-Structural Benefits and Challenges
  M. Méheut, D. Losada Costoso, F. Moens, O. Atinault, G. Starck, C. Julien, L. Vertonghen, C. Mollet, S. Defoort, E. NGuyen Van, E. Stragiotti, R. Parello J. Sodja, S. de Boer
• [15:00 - 15:20] Preliminary design of a future SMR aircraft powered by LH2 Open Fan engine
  E. Nguyen Van, V. Brodbeck, S. Defoort, N. Tantot
• [15:20 - 15:40] Nonlinear Aeroelastic Wingbox Sizing Model for Overall Aircraft Design of Flexible High-Aspect-Ratio Wings
  Ousmane S, Joseph Morlier, Emmanuel Benard
• [15:40 - 16:00] Flight Mechanics-Driven Conceptual Design of Twin-Fuselage Aircraft
  Álvaro Cobo-González, Miguel Antonio Antón-Díez, Miguel Ángel Gómez-Tierno, Manuel Pérez-Cortés, Cristina Cuerno-Rejado

• [14:00 - 14:20] Extending SysML v2-Based MBSE–MDAO Integration to Uncertainty and Multi-Fidelity Optimisation: Application with GEMSEO to a Hybrid-Electric Regional Aircraft
  Jean-Christophe Giret, Jean-Marie Gauthier, Sylvain Béchet, Romain Espoeys, Matthias De Lozzo, Mickael Guillen, Sparsh Garg, Jasper Bussemaker, Francesco Torrigiani, Simone Mancini, Tim Klaproth
• [14:20 - 14:40] A Modular Digital Engineering Framework for Multidisciplinary Sizing and Integration of Hydrogen-Electric Aircraft Propulsion Systems
  Pablo Moreno-Escolástico, Marco Raiola, Rodrigo Castellanos, Andrea Cini
• [14:40 - 15:00] Exploration of Machine Learning-Assisted Multidisciplinary Design Optimization Methods in Aircraft Conceptual Design Using Digital Twin Technology
  Elif Zeyneb Tekin, Melih Yildiz
• [15:00 - 15:20] Sequential Sampling Algorithm for the Design of a Hybrid-Electric Regional Aircraft under Uncertainty
  Romain Espoeys, Matthias De Lozzo, Jean-Christophe Giret, Sylvain Béchet
• [15:20 - 15:40] Towards a Scalable Reference Architecture: Matrix-based Approach to Scalable High-Level Requirements for Next-Generation Military Integrated Modular Avionics (NG MIMA)
  Philipp Hahner
• [15:40 - 16:00] Natural Language Processing for Pilot Intent Recognition in Next-Generation Fighter Cockpits: a Proof-of-Concept and its Assessment Approach
  Mario Muscio, Marco Fabbri

• [14:00 - 14:20] Roughness-Aware Experimental Validation of an Additively Manufactured Multi-Stage Passive Pressure Reducer for Liquid Hydrogen Propulsion Systems
  Arash Safaei, Matteo Bertone, Matteo D.L. Dalla Vedova, Paolo Maggiore
• [14:20 - 14:40] Study of the recycling impact on fatigue behaviour of a Ti-6Al-4V produced by SLM
  Teresa Morgado, João Alves, Daniela Neves
• [14:40 - 15:00] Experimental and Numerical Investigation of the Dynamic Properties of Sandwich Structures with Lattice Cores
  Florian Mock, Kai-Uwe Schröder
• [15:00 - 15:20] Study of additive manufacturing of advanced ceramics with acoustic waves
  Cloé Benoit, Marc Mihajlovic, Antoine Dode, Marine Bertucchi, Gabrielle Racz, Christophe Tenailleau, Cédric Neuville
• [15:20 - 15:40] Tensile Characterization of Light-Weight PLA and ASA Thermoplastics for Fused Filament Fabrication
  Alexander J Lamey, Ruben E Perez
• [15:40 - 16:00] Structural Integrity of Solid-State Metal Additive Manufacturing for Aerospace Components
  Diana Lados, Anthony Spangenberger

• [14:00 - 14:20] Ontology-Based Approach for Future Civil Aviation Technology Management to Combine Literature and Expert Knowledge
  L. Neubacher, J. Jepsen, P. S. Prakasha
• [14:20 - 14:40] System of Systems Approach to Impact Assessment in Aviation Using a Multilevel Sustainability and Competitiveness Framework
  Patrick Ratei, Prajwal Shiva Prakasha
• [14:40 - 15:00] An Integrated Modeling and Dashboard Framework for Aviation Impact and Transformation Assessment
  P. Bertram, P. Ratei, J. Jepsen, P. S. Prakasha
• [15:00 - 15:20] System Dynamics and Game-Theory Modelling for Multi-Stakeholder Competitive Analysis in System of Systems Aviation Impact Assessments
  H. Szöke-Erös, P. S. Prakasha
• [15:20 - 15:40] A Novel Taxonomy for Aviation Emissions Models
  Michael P. Weinold, Marty Noe, Gian Carlo Heller, Peter Wild, Russell McKenna
• [15:40 - 16:00] -

• [14:00 - 14:20] MDAO formulations based on disciplinary surrogate models
  S. Dubreuil, N. Bartoli, T. Lefebvre, C. Gogu
• [14:20 - 14:40] Acceleration of the Bi-Level BCD MDO Architecture Applied to Aircraft Design
  Shubham Deshmukh, François Gallard, Joel Brezillon, Anne Gazaix, Andrea Brugnoli, Joseph Morlier
• [14:40 - 15:00] Topology optimization of composite structures using curved Double-Double laminates
  Thuan Ho-Nguyen-Tan, Hoil Choi, Minkook Kim, Soon Ho Yoon, Jaesang Yu
• [15:00 - 15:20] High-Order Beam Modelling of Tapered Composite Wing Structures
  Cardone D., Cavallaro R., Cini A.
• [15:20 - 15:40] A Multi-Objective Optimization Framework for Sustainable and Strategic Airframe Material Composition in Conceptual Aircraft Design
  Shantanu Sapre, Joseph Morlier, Christian Gogu, Olivier Grellou
• [15:40 - 16:00] Machine-Learning-Assisted Transfer Matrix Analysis of Cutout-Induced Imperfections in Rotationally Symmetric Shell Structures
  Finn Eggers, Kai-Uwe Schröder

• [17:00 - 17:20] Design, Analysis & Manufacturing of LRI Thermoset Leading Edge Demonstrator
  E.Karachalios, V.Prentzias, M.Roussos, S.Spyrou, E.Louizos
• [17:20 - 17:40] Shaping the Future of Wing Manufacturing: An Integrated Flap Upper Skin Demonstrator Based on Resin Infusion Technologies
  José Martín Bravo, Rocío Palomo Vera, Luis Sepúlveda Ramos, Francisco Javier González González
• [17:40 - 18:00] Herwingt Pylon to Pylon demonstrator
  Ana Rodríguez Henche, Alba López Ruiz, Sebastián Díaz
• [18:00 - 18:15] A Scalable Resistance Welding System for Thermoplastic Composite Leading Edges: From Laboratory Optimization to Full-Scale Demonstrator Assembly
  Massimiliano Russello, Enrico Chemello, Marta Juanatey Muradas, Mohsen Bahrami, Elena Senin Rodriguez
• [18:15 - 18:30] From Conceptual Design to Preliminary Functional Testing: Development and Experimental Maturation of a Morphing Trailing Edge Flap Demonstrator
  M. C. Noviello, B. Galasso, F. Amoroso, M. Ciminello, P. Catalano, S. Ameduri
• [18:30 - 18:45] Experimental testing of spanwise wingbox deformation effects on the achieved morphing trailing-edge shapes of the Translation Induced Camber concept
  Ilias Tsatsas, Jurij Sodja, Roeland De Breuker
• [18:45 - 19:00] Experimental Geometry Reconstruction and Numerical Validation of a Full-Scale Morphing Aileron Demonstrator
  Davide Mastrodicasa, Silvia Vettori, Emilio Di Lorenzo, Vittorio Cavalieri, Alessandro De Gaspari

• [17:00 - 17:20] Cryogenic powertrains as key enabler for fully electric hydrogen fuel cell powered aircraft
  Christian Bentheimer, Florian Bayer, Dr. Markus Meindl, Dr. Bernd Eckardt
• [17:20 - 17:40] Advancing Cryogenic Cooling And Electrical Distribution Systems For Future Hydrogen-Powered Aviation
  Daniel Kierbel, Reda Abdouh, Dominika Chamoro, Ikram Mataich, Arne te Nijenhuis, Marcel Schoonmade, Frank Wokke, René Alderliesten, Marc Dhalle, Gerhard Knol, Francesco Dioguardi, Frank van Duin, Max Van Vliet, Tim Hope, Ben Eastment, Matteo Tassisto, Emelie Nilsson, Jeremie Monin-Baroille, Jan-Willem van Zwieten
• [17:40 - 18:00] ICEFlight: An exploratory study into LH2/GHe heat exchangers for a cryogenic-electric network
  Vincent P.W. van Krimpen, Arne K. te Nijenhuis, Sam W. Deckers, Johannes van Es
• [18:00 - 18:20] Towards hybrid-electric regional aircraft - a battery safety perspective
  Simon Holz, Dario-Vincenzo Di Modica, Javier Marco-Gimeno, Carlos Micó Reche
• [18:20 - 18:40] Battery safety including crash and thermal runaway in the hybrid-electric powered H145 PioneerLab
  Dario-Vincenzo Di Modica, José Luis Sandoval Murillo, Thomas Kisters, Jonas Pfaff, Luis Otavio Cortes Magalhaes, Simon Holz
• [18:40 - 19:00] Validation of a Virtual Tool for Thermal Runaway Propagation in 21700 Format Lithium-Ion Battery Modules
  Florian Bader, Nico Schneiderhan, Martin Wenger, Reinhold Waller

• [17:00 - 17:20] Experimental Assessment of an Electrical Temperature Control System with Carbon Heating Duct Technology for More-Electric Aircraft Cabins
  Victor Norrefeldt, Marie Pschirer, Arnav Pathak, Josef Ostermayer, Marc Ahlburg
• [17:20 - 17:40] Thermal Performance Assessment of a Capillary Jet Loop Passive System for Air Supply Motor Power Electronic Powertrain Cooling in Hybrid-Electric Aircraft
  Vincent Dupont, Christian Popper, Wouter Blom, Martijn Hagen, Johannes Van Es, Florian Denz, Nejat Mahdavi, Julian Dumouch, Khairi Sioud, Esli Trejo Peimbert
• [17:40 - 18:00] Results of Scaled Test Program on Skin Heat Exchanger for Thermal Management in Hybrid Electric Regional Aircraft
  Benigno J. Lázaro, Ezequiel González-Martínez
• [18:00 - 18:20] Avionics Heat Reuse for Cargo Heating
  Victor Norrefeldt, Marie Pschirer, Arnav Pathak, Marc Ahlburg
• [18:20 - 18:40] Engine Waste Heat Usage by Energizing the Bypass Flow Using Surface Turbulators
  Myles Zabel, Marit Blanke, Bernhard Weigand
• [18:40 - 19:00] Design and testing of a 65 kW Two-Phase Mechanically Pumped Loop Demonstrator for Aerospace Power Electronics Cooling 
  Johannes van Es, Julian Biesheuvel, Wouter Blom, Martijn Hagen, Fatima Cherdouh, Esli Trejo Peimbert, Ricardo Gantus, Pierre Trolliet, Julian Dumouch, Alice Marquier, and Laurent Labaste Mauhe

• [17:00 - 17:20] Effects of Sustainable Aviation Fuel on the Performance, Emissions, and Combustion Stability of a Small Turbojet Engine
  Pařez J, Pechout M, Vojtíšek M
• [17:20 - 17:40] Design of Hydrogen-Based Propulsion Systems and Implications for Regional Aircraft Operational Safety
  Ulrich Carsten Johannes Rischmüller, Alexander Kieß, Joachim Siegel, Joël Jezegou, Mirko Hornung, Andreas Strohmayer
• [17:40 - 18:00] The effect of a hydrogen flame on the geometric structure and tightness of contacting surfaces
  Kawalec A., Drajewicz M., Rogalski T.
• [18:00 - 18:20] Safety-Assured Performance Assessment and Uncertainty Quantification of a Hydrogen-Fuelled Aircraft Engine Using a Surrogate Model
  Nikolaos Satrazanis, Konstantinos Bollas, Michail Psaropoulos, Panagiotis Giannakakis, Georgios Arvithis, Vasilis Gkoutzamanis, Anestis Kalfas, Alessandro Borgia, Francesco Orefice
• [18:20 - 18:40] Uncertainty Quantification of the Energy Supply for Low-Carbon Aviation
  Amal El Bouzekraoui, Nicolas Monrolin
• [18:40 - 19:00] Priority goal decomposition for multi-level assessment of the conceptual aircraft exposure and impact on environment
  Zaporozhets Oleksandr, Kazhan Kateryna, Synylo Kateryna, Makarenko Vitalii, Tokarev Vadim, Chyla Andrzej

• [17:00 - 17:20] Box-Wing as a scalable enabling architecture from large transport to low-altitude economy
  Palaia G., Abu Salem K., Frediani A., Rizzo E., Martini M.
• [17:20 - 17:40] Hydrogen Tank Integration Trade-Offs for a Fuel Cell-Powered Business Commuter Aircraft
  Fabrizio Nicolosi, Mario Di Stasio, Felicia Palmiero, Giuseppe Melone
• [17:40 - 18:00] Validation of an aircraft design framework with experimental flight test data of an all-electric aircraft
  Dominik Eisenhut, Andreas Bender, Jonas Mangold, Andreas Strohmayer
• [18:00 - 18:20] Parameterized cabin layouts and flexible fuselage design: a harmonized approach for enhanced cabin comfort
  Katerina Hofmann, Christian Hesse, Jörn Biedermann, Björn Nagel
• [18:20 - 18:40] Flight Control Systems Hinge Loads Estimation for Aircraft Conceptual Design of Fighters
  David Lundström, Erick Espinosa Juárez, Andrea Vitale
• [18:40 - 19:00] Eco-Design of Mixed-Flow Turbofan Engines for Sustainable Supersonic Transport: Balancing Propulsive Performance and Emissions at the Conceptual Design Stage
  Borgna Fabrizio, Roberta Fusaro, Davide Ferretto, Nicole Viola, Marco Marini

• [17:00 - 17:20] Hybrid-Electric Regional Aircraft behavioral system-level digital twin development
  Fabien Retho, Antoine Delacourt, Elias Allegaert, Philippe Barabinot, Marco Fioriti, Luigi Zutta, Hamed Akhavan, Andrea Terracciano, Pierpaolo Borrelli
• [17:20 - 17:40] A Real-time Digital Twinning Platform for Distributed Electric Propulsion Aircraft Design
  Dongyu Li, Yan Zhao, Tao Yang
• [17:40 - 18:00] Digital-twin model for assessing energy consumption and efficiency in flight control actuators for new hybrid-propulsion regional aircraft
  V. Marra, A. De Martin, M. Sorli
• [18:00 - 18:20] Experimental Validation of an Aircraft Digital Twin Using via Wind Tunnel Testing: From Concept to Verification
  Ayşe Nur Dişlitaş, Melih Yildiz
• [18:20 - 18:40] Improving Information Supply by a Digital Design Twin for Electric Propulsion Systems
  Jörg Brünnhäußer, Thomas Zimmermann, André Reißig, David Muradyan, Pascal Lünnemann, Kai Lindow
• [18:40 - 19:00] Intelligent Digital Twinning of UAVs Using Residual Learning with Reservoir Computing
  Yan Zhao, Anthony Siming Chen, Mark Jabbal, Dongyu Li, Tao Yang

• [17:00 - 17:20] Nanodiamond-based coating for aircraft transparencies: Test equipment and measurement program
  L. Flavio Campanile, Maike R. Klinkmüller, Chris F. Fischer, Johannes F.C. Markmiller
• [17:20 - 17:40] Surrogate model for lightweight metamaterial sandwich optimization
  Vladimír Hostinký, Jan Navrátil, Ivo Jebáček, Jurij Sodja, Anastasiia Krushynska
• [17:40 - 18:00] Through-thickness thermal response of in-situ consolidation CF/LM-PAEK manufactured by pulsed flashlamp automated fiber placement
  E. Tobin, D. M. J. Peeters
• [18:00 - 18:20] Modelling the Economic Cost of a Supply Shock on Key Aerospace Materials
  David Plesch, Alberto Berardi
• [18:20 - 18:40] Analytic Modelling of the Effective Mechanical Properties of Origami Sandwich Structures
  Florian Scheiber, Kai-Uwe Schröder
• [18:40 - 19:00] Broadband Flow Control via Lattices of Coiled Phononic Subsurfaces
  David Roca, Adam R. Harris, Armin Kianfar, Daniel Yago, Christoph Brehm, Mahmoud I. Hussein

• [17:00 - 17:20] Comparison of aviation mitigation strategies using customisable climate models
  Thomas Planès, Léa Dupont, Philippe Mattei, Félix Pollet
• [17:20 - 17:40] From Scouting to Assessing the Long-term Systemic Climate Leverage Potential of Emerging Technologies for Aviation
  Lily Koops, Jana Janeva
• [17:40 - 18:00] Impacts of Contrail Accounting in the EU ETS: A Large-Scale Analysis of European Operations in 2018 (BECOM Project)
  Zarah Lea Zengerling, Federica Castino, Malte Niklaß, Feijia Yin
• [18:00 - 18:20] Local Air Quality Assessment for Updated Airport Fleet via EFACA and SENECA Aircraft
  Synylo Kateryna, Zaporozhets Oleksandr, Krupko Andrii, Makarenko Vitalii, Yakushenko Oleksandr
• [18:20 - 18:40] Validation of Contrails predictions with Ground Observations
  Tanguy Chauvet, Romain Moreau, Thomas Menage-Brinster, Corentin Ghestem, Maryam Boujdaa, Bernard Mouton, Pascal Maurer, Clément Langolff
• [18:40 - 19:00] A simulation tool for airport flight operations
  Jordi Pons-Prats, David De la Torre

• [17:00 - 17:20] Aircraft Mission-Based Climate Impact Surrogate Modeling for Engine Pre-Design
  Nils Roth, Patrick Egerer, Rafael Balderas-Xicohtencatl
• [17:20 - 17:40] Multi-fidelity aerostructural optimisation of composite wings via RANS adjoint drag sensitivities
  Evangelos Filippou, Jurij Sodja, Roeland De Breuker
• [17:40 - 18:00] A Training-Oriented Hydrogen, Kerosene, and Battery Aircraft Design MDO Problem with Uncertainties
  Dajung Kim, Thierry Druot, Nicolas Peteilh, Omar Hammami, Matthias De Lozzo, François Gallard
• [18:00 - 18:20] Multidisciplinary Design of High Aspect Ratio Wings: Maximising Active Load Alleviation via Control Surface Topology Optimisation
  Armand-Ioan Curpanaru, Philippe Pastor, Fabrice Demourant, Eric Nguyen Van
• [18:20 - 18:40] System of Systems Optimization for Robust Autonomous Air Cargo Operations
  Ruben E. Perez, Jeremy C.-H. Wang
• [18:40 - 19:00] - 

• [10:30 - 10:50] HESTIA: Hydrogen combustion in aeroengines
  Nicholas Treleaven, Marc Truscelli
• [10:50 - 11:10] Mastering key phenomena of H2/air combustion
  Benoît Fiorina
• [11:10 - 11:30] Injection systems design – incremental & breakthrough technologies
  Thomas Komarek
• [11:30 - 11:50] H2 combustion technology specifications and operability assessments in representative aircraft conditions
  Murthy Ravikanti
• [11:50 - 12:30] Open Discussion

• [10:30 - 10:50] Beyond the Test Pyramid: A New Approach for Certification of Emerging Materials and Structures
  John-Alan Pascoe
• [10:50 - 11:10] Structural Mass Optimization of Boeing 787 Components Using CFRP-Kevlar Hybrid Composites for Fuel and Emissions Reduction
  Mykyta Koliesnik
• [11:10 - 11:30] Surrogate-Assisted Layout and Sizing Optimization of a Composite Wingbox Using Automated GFEM Generation
  Nikolaos Ziakos, Andrea Cini
• [11:30 - 11:50] The Application of Physics-Informed Neural Networks for Structural Strength Enhancement
  J. Ribeiro, B Ribeiro, R. Fitas, S.M.O. Tavares
• [11:50 - 12:10] Multiscale Modelling and Machine Learning of Shock-Absorbing Hyper-Elastic Metamaterials for Aerospace Payload Protection
  Yago D., Abad D., Cante J., Lloberas-Valls O.
• [12:10 - 12:30] -

• [10:30 - 10:50] Development and testing of a lightweight two-phase pumped cooling system for aviation fuel cells in the BRAVA project
  Henk Jan van Gerner, Georg Mühlthaler, Marcus-Benedict Buntz
• [10:50 - 11:10] Cryogenic thermal conductivity of additively manufactured ceramics for thermal management components
  Nils Wieja, Lisa Mikiss, Jan Condé-Wolter, Christoph Ebert, Martin Schwentenwein, Maik Gude
• [11:10 - 11:30] Demonstration and Performance Assessment of Two-Phase Cooling for Fuel Cell Stacks in Commercial Aviation
  Marcus-Benedict Buntz, Henk Jan van Gerner, Georg Mühlthaler
• [11:30 - 11:50] Flight and Wind Tunnel Performance Characterization of a Structural Folded-Core Composite Skin Heat Exchanger Using Temperature-Sensitive Paints
  Marvin Tigre Larschow, Simon Thissen, Stefan Zistler, Andreas Bender, Jakob Gugliuzza, Rico Poser
• [11:50 - 12:10] Computational Investigation of Oil Flow Characteristics for Lubrication and Cooling Optimization in a new complex aircraft transmission
  Helmut Mad, Gernot Burghard Hedjri-Peyfuss
• [12:10 - 12:30] CFD-Analysis of an integrated Turbofan Guide Vane Heat Exchanger for Hydrogen and Conventional Propulsion systems
  Gernot Burghard Hedjri-Peyfuss, Patrick Laggner, Helmut Mad

• [10:30 - 10:50] Motor control Electronics for Flight Control Actuators, A Trade Study of Architecture and System-Level Packaging
  Nejat Mahdavi, Julian Ziegler, Sven Regenscheit
• [10:50 - 11:10] Comparison of Classical and Neural Network-Based Approaches for UAV Trajectory Prediction
  Welcer M, Ładyżyńska-Kozdraś E, Sahbon N, Zajdel A, Szczepański C
• [11:10 - 11:30] Software-in-the-Loop Validation of Active Disturbance Rejection Control for Autonomous Taxiing of Unmanned Aircraft
  Albert Zajdel
• [11:30 - 11:50] Methods of improving inertial navigation based on terrain-referenced measurements
  Krystian Borodacz
• [11:50 - 12:10] Modelling Data Busses
  Malte Rahm, Jonte Kaletka
• [12:10 - 12:30] -

• [10:30 - 10:50] Laminar-Turbulent-Supercritical-Wing Concept and Its Aerodynamic Properties in Transonic Flight
  Stalewski W.
• [10:50 - 11:10] Airfoil Optimization for conceptual design of novel aircraft concepts
  L. Neuerburg, S. Cremer, F. Schültke, E. Stumpf
• [11:10 - 11:30] An Ice-Tolerant Tailplane Sizing Methodology for High-Aspect-Ratio Truss-Braced Wings
  Ciro Cuozzo, Salvatore Corcione, Alessandro Zanon, Lucas Kugler
• [11:30 - 11:50] The roadmap for sustainable aviation regarding noise reduction: main objectives, solutions and key considerations
  María Zamarreño Suárez, Rosa María Arnaldo Valdés, Francisco Pérez Moreno, César Gómez Arnaldo, Raquel Delgado-Aguilera Jurado and Víctor Fernando Gómez Comendador
• [11:50 - 12:10] Semi-empirical liner design procedure for aeronautical engine noise reduction
  F. Petrosino, F. Pesce, M. Barbarino, G. Fasulo, R. De Robbio
• [12:10 - 12:30] Computational framework for aircraft noise estimation, from source to the ground
  F. Petrosino, L. De Vivo, M. Barbarino, G. Fasulo

• [10:30 - 10:50] Designing for Operations: Translating Customer Expectations into Aircraft Availability
  Sebastien Dargein
• [10:50 - 11:10] Selection of Right Maintenance Strategy in Early Aircraft Design based upon a Model-based Methodology
  Veda Sai Vasanth Naidu Adduru, Krithi Ganesh Kottary, Joël Jezegou, Sagar Shenoy Manikar
• [11:10 - 11:30] Model-Based Operational Effects Analysis
  Ema Almeida, Pedro Martins Gonçalves
• [11:30 - 11:50] Computational Fluid Dynamics Investigation of Multi-Element Tubercle Wing Design
  Martin M. Alexiev, Ruben E. Perez
• [11:50 - 12:10] Investigation and Formalisation of the Relationship between Sustainability and Operability
  Pratik Anand Badawadagi, Vinoth Kumar Aroumougame, Joël Jezegou, Sagar Shenoy Manikar
• [12:10 - 12:30] How can AI assist in Live Decision-Making for Aircraft Fleet Performance in Airlines Maintenance Control Centers?
  Vincent Cheriere, Nicolas Andre, Siwar Lachiheb

• [10:30 - 10:50] Aerodynamic Characterization of HYPERION Suborbital Spaceplane
  Roncioni P, Marini M, Palazzo S, Izzo C, Schettino A, Di Benedetto S, Russo G, de Pasquale L, Voto C, Stoican MG, Bunescu I
• [10:50 - 11:10] Analysis of Critical Stores in an Internal Weapons Bay Using Detached Eddy Simulations
  John G MacLaurin, Ruben E Perez
• [11:10 - 11:30] Experimental Research of Cantilever Wing Flutter and Its Suppression Algorithm at Low Reynolds Numbers Based on Unsteady VLM Modeling
  Martynas Lendraitis, Jonathan Gerald Pelham, Mindaugas Dagilis, Sigitas Kilikevičius
• [11:30 - 11:50] Prediction of jet noise for a shielding configuration of a supersonic aircraft nozzle using a RANS-based acoustic analogy
  Antimo Glorioso, Mattia Barbarino, Francesco Petrosino and Giovanni Fasulo
• [11:50 - 12:10] Evaluating metamaterials for aeroelastic instability mitigation in wind energy
  Sergio G. Horcas, David Roca, Enrique Ortega, Juan Cante
• [12:10 - 12:30] Flutter Analysis of Flexible Wing Configurations Using Pre-Stressed Structures Technique
  M. Bocioaga, R.A. Bocioaga, T. Vladimirescu

• [10:30 - 11:00] HERFUSE Project
  Mario Pirozzi
• [11:00 - 11:30] H2ELIOS Project
  Emma C. Lope
• [11:30 - 12:00] CAVENDISH Project
  Andreas Frenzel
• [12:00 - 12:30] HERA Project
  Piscopo Giuseppe

• [13:30 - 13:50] Quality Assessment of Adhesive Joints Using Feature-Based Machine Learning
  Elena Jasiūnienė
• [13:50 - 14:10] Embedded FBG-Based Smart Composite Panels for Aerospace Structural Health Monitoring and Impact Detection
  Alessandro Aimasso, Paolo Maggiore, Matteo D.L. Dalla Vedova
• [14:10 - 14:30] Monitoring and Mitigation of Ice Formation in Aircraft Structures and Fuel Systems
  Helge Pfeiffer, Navid Mostofi Sarkari, David Seveno
• [14:30 - 14:50] Opportunities and challenges of resonant ice protection systems for regional aviation
  Valerie Pommier-Budinger, Marc Budinger, Pierre Bonhomme, Yohan Sabathe, Jason Pothin, Valerian Palanque
• [14:50 - 15:10] Noise Reduction of Laser-Ultrasonic Signals in CFRP Using a Hybrid Deep Learning Approach
  Aditi Mhatre, Caspar Wasle, Rebecca Rodeck, Gerko Wende
• [15:10 - 15:30] AJP-Based Strain Sensing for CFRP Structures: From Anisogrid Validation to Tank-Level Application
  Stefano Perilli, Francesco Galliani, Emanuele Mantini, Massimo Di Pietro, Francesco Di Caprio, Vincenzo Iannone, Giovangiuseppe Giusto, Michela Simoncini, Massimo Panella, Eva Milella
• [15:30 - 15:50] Automated Digitization of Maintenance Handwritten Data Using Multiple Fine-Tuned Models
  Alejandro Murrieta-Mendoza, Toon Vos, Leandro Rodrigues Oliveira Yaïr Brouwer

• [13:30 - 13:50] A Computational Framework for Predicting the Mechanical Properties of Recycled CFRP Laminates
  Ilektra Tourkantoni, Konstantinos Tserpes
• [13:50 - 14:10] Simulation of aircraft kinematics during ditching using a meshfree pointset method
  D. Kohlgrüber, M. Petsch
• [14:10 - 14:30] Aero-Structural Modelling of a Two-Degree-of-Freedom Movable Wingtip for Aeroelastic Response Analysis
  Peide Zhou, Bocheng Zhang, Chao Yang
• [14:30 - 14:50] Progressive Damage Analysis of Stiffness-Transition Regions in Composite Aerostructures Under Static and Impact Loading
  Hande Girard, Yusuf Ozan Çakir, Dilan Ezgi Yücel
• [14:50 - 15:10] Efficient computation of the dynamic response for vibroacoustic metamaterials on finite stiffened plates
  Daniel Alboldt, Marcel Mecnarowski, Lukas Kettenhofen, Kai-Uwe Schröder
• [15:10 - 15:30] Thermal-Function-Driven Design and Integrity Assessment of Multifunctional Multilayered Sandwich Structures for Aircraft Skin Panels
  Xiaohui Chen, Kai-Uwe Schröder

• [13:30 - 13:50] Modeling of Coupled Bearing Chamber and Scavenge Line Processes in a Gas Turbine Engine
  Taras Mykhailenko, Illia Petukhov, Artem Kovalov, Oleksandr Goridko, Oleksii Lysytsia
• [13:50 - 14:10] Aerodynamic Design and Evaluation of Open and Shrouded Propellers for eVTOL Applications
  Julia Sembowski, Daniel Kessler, Jonas Oldeweme, Radimir Yanev, Ingo Staack, Jens Friedrichs
• [14:10 - 14:30] Comparison of numerical and experimental investigations of an air cooling duct under propeller slipstream, crosswind, and headwind effects
  Prabhjot Singh, Dirk Soggeberg, Sebastian Merbold, Stefanie de Graaf
• [14:30 - 14:50] Water droplet spray injection for optimization of RAM air heat exchangers in next-generation aircraft: proof of concept, test set-up and results
  Monique Lamers, Thomas Ganzeboom, Johannes van Es
• [14:50 - 15:10] Gradient-Based Aerodynamic Optimization and Experimental Validation of a Wing-Integrated Heat Exchanger for Fuel Cell Aircraft
  F. Sell, J. Seel, D. Nölle, J. Markmiller, H. Pfeifer
• [15:10 - 15:30] Thermal Management in Emerging Propulsion Architectures: Opportunities and Design Challenges
  Carlos Xisto, Anders Lundbladh

• [13:30 - 13:50] GHIST: A Geospatial Decision-Support Framework for Hydrogen Aircraft Integration into European Flight Networks
  Ayodeji C. Akinola, Thomas Feuerle, Peter Hecker, Marc Launer
• [13:50 - 14:10] Tailoring Aviation Decarbonisation Roadmaps: Advancing AeroMAPS Towards Highly Customisable Scenario Modelling
  Antoine Salgas, Thomas Planes, Scott Delbecq
• [14:10 - 14:30] Fleet-Level Assessment of Multi-Fuel Aircraft in the European Flight Network
  Adnan Muslić, Barlas Türkyilmaz, Moritz G. Kolb, Ling L. Lim
• [14:30 - 14:50] A Roadmap for the Reliable Adoption of Wide Bandgap Power Electronics in Electric Aircraft Propulsion
  Arijit Sengupta, Jeff Kugener, Kurt Gnerlich, Jose Chamorro Cuastuza, Ilja Koch, Stefan Kazula
• [14:50 - 15:10] Operational Efficiency through Aircraft Sharing: A Tactical Planning Perspective
  Vasiliki Kalliga, Thomas Hagspihl, Constantinos Antoniou
• [15:10 - 15:30] Business Impact Assessment of Environmental Decision-Support Tools for Aviation and Innovative Air Mobility
  Anna Palaiologk, Sofia Iosifidou, Eleftheria Georgant, Eva Palaiologk

• [13:30 - 13:50] Uncertainty-aware global sensitivity analysis for aircraft conceptual design
  Alessandro Borgia, Francesco Orefice, Arvind Gangoli Rao
• [13:50 - 14:10] Multidisciplinary Design Optimization of Hybrid Aircraft: Influence of the Range of Mission Profiles on Optimal Design
  Didier Brousset-Matheu, Eric Nguyen Van, Sébastien Defoort, Xavier Roboam, Bruno Sareni
• [14:10 - 14:30] Quantifying Sensitivities and Efficiency Penalties of Conventional TLARs on Fuel-Cell-Electric Regional Architectures
  Simon Müller, Georgi Atanasov, Thomas Zill
• [14:30 - 14:50] A Mid-Fidelity Aeroacoustic Assessment of the Hydrogen-Fuel-Cell Propulsion System Ground Demonstrator of the NEWBORN Project
  M. Barbarino, A. Visingardi, F. Petrosino, G. Fasulo, F. Morlando, E. G. Behar
• [14:50 - 15:10] Assessing Noise-Related Environmental Interdependencies of EFACA Aircraft Technologies across Vehicle, Airport and Fleet Levels
  Oleksandr Zaporozhets, Vitalii Makarenko, Kateryna Kazhan, Vadim Tokarev, Andrzej Chyla
• [15:10 - 15:30] Fleet-Level Effectiveness and Fuel Penalty of Vertical Contrail Avoidance for Long-Range Aircraft in Conceptual Design
  Shao-Yu Wang, Elif Erden, Simon Kirschler, Dennis Piontek

• [13:30 - 13:50] Strategies for Technology Infrastructures in Aviation
  Degenhardt R., Mialon B., Ceglia G., Kühnelt H., R. Moreno, F. Cardoso, Hakkaart J., Lanzi P., Coutosayalero V., Drężek P., Zalewska M.
• [13:50 - 14:10] Regional Operative Scenarios for Hybrid-Electric Regional Aircraft
  Prashant Prashant, Pieter-Jan Proesmans, Maurice Hoogreef, Fabien Retho, Philippe Barabinot, Rui Marcelino, Catarina Ferreira, Fabio Martins
• [14:10 - 14:30] Reliability-Based Maintenance Cost Estimation for Alternative-Propulsion Aircraft
  Ayodeji C. Akinola, Blessing Adetomiwa, Kulkarni Manas, Marc Launer
• [14:30 - 14:50] Reducing fuel flow and CO2 emissions during cruise flight through continuously increasing altitude operations on the North Atlantic Track System
  Marco-Michael Temme, Metodi Meissner
• [14:50 - 15:10] Using Continuous-Time Markov Chains for Model-Based Safety Analysis
  Olivier Sapin, Matthias De Lozzo, Tony Ghueldre, Tatiana Prosvirnova, Christel Seguin
• [15:10 - 15:30] Management of Command-and-Control Link Loss for Automated VCA Flight in Uncontrolled Airspace
  Boyan Iliev, Roberto Trapananti, Marko Radanović

• [13:30 - 13:50] Development and Numerical Investigation of Dimple Surfaces for Flow Loss Reduction on Gear Side Faces
  Gernot Burghard Hedjri-Peyfuss, Helmut Mad
• [13:50 - 14:10] Flight Dynamics Assessment of a Twin-Fuselage Aircraft Using a Conceptual-Level Aerodynamics Model
  Álvaro Cobo-González, Eduardo García-Santana, Cristina Cuerno-Rejado
• [14:10 - 14:30] Methodology for immersive AR/VR visualization of CFD simulations
  Sergio Avila-Sanchez, Alvaro Cuerva-Tejero, Oscar Lopez-Garcia, Ricardo Fernandez-Aldama, Guillermo Torres-Pedrares
• [14:30 - 14:50] Enhanced UHBR Reynolds-Number Scaling for Flying Testbed Design
  Marco Trost, Rainer Schnell
• [14:50 - 15:10] Aerodynamic Considerations for Autonomous Urban UAV Systems: Investigating Compact EDF Architectures for Close-Proximity Flight Operations
  E. Mikayelyan
• [15:10 - 15:30] Main rotor aerodynamic design for Martian manned rotorcraft capable to transport passenger or load for future mars missions
  Kocjan J., Rogólski R., Kiszkowiak Ł., Kachel S.