• [11:25 - 11:45] Introduction to X-Challenge
• [11:45 - 12:05] Advancing Aerial Firefighting with Extended Operational Design using Novel Strategies and Aircraft Concepts 
  Shraddha Sheshadri, Alex Mercier, Sarah Treece, Cristian Puebla Menne
• [12:05 - 12:25] Integrated Aerial System Design for Wildfire Fighting and Surveillance with Tactical Considerations 
  Giho Lee, Byeongjun Park, Minseong Kim, Sewoong Oh, Sewoon Park, Soungmin Choi
• [12:25 - 12:45] Designing and Evaluating Sustainable and Effective Aircraft for Aerial Wildfire Fighting 
  Kaung Sett Toe, Kyaw Zaw Hlyan, Soe Yu Waddy, Aung Hein Kyaw
• [12:45 - 13:05] A Holistic Approach to Wildfire Fighting Aircraft Fleet Design Using Operational Considerations and Evaluation Metrics 
  Jonah Gerardus, Somrick Das Biswas, Adler Edsel, Ece Inanc
• [13:05 - 13:25] Open Discussion  

• [11:25 - 11:45] Cooling system for a future electric aircraft using superconducting and cryogenic technologies  
  Matteo Tassisto , Swapnil Kharche, Keith-Royce Lai, Timin Jacob, Frederick Berg, Antoine Delarche, Camille Chaper, Vincent Bourgoin, Reda Abdouh, Ravi Kiran Surapaneni, Jean Francois Allias, Ludovic Ybanez
• [11:45 - 12:05] Staged Impingement Arrays for Novel Heat Exchanger Designs: A Numerical Investigation 
  Hans-Martin Schlesier, Robin G. Brakmann, Robin Schöffler, Pawel Ziolkowski, Sahil Bhapkar
• [11:05 - 12:25] DYNAMIC SIMULATION AND COMPARISON OF NANOFLUID APPLICATIONS ON AIRCRAFT THERMAL MANAGEMENT SYSTEM
  Sofia Caggese, Flavio Di Fede, Marco Fioriti, Grazia Accardo
• [12:25 - 12:45] Experimental and numerical investigation on cooling ducts for thermal management of fuel cell based aero engines
  Sebastian Merbold, Franz-Theo Schön, Prabhjot Singh, Chetan Sain, Jeffrey Hänsel, Stefan Kazula, Stefanie de Graaf
• [12:45 - 13:05] Experimental Characterization of a Compact Gyroid-Pipe Heat Exchanger for the Propulsion of a Fuel Cell Powered All-Electric Aircraft
  Chetan Sain, Jeffrey Haensel, Stefan Kazula, Sebastian Merbold, Franz-Theo Schoen
• [13:05 - 13:25] -

• [11:25 - 11:45] Composite-Based Advanced Lightweight Design with Non-Conventional Laminates
  Guillermo Máximo Rodriguez, Federico Martín de la Escalera
• [11:45 - 12:05] Slender Wing Morphing Leading Edge Surfaces – Analysis of Advanced Drop Nose Device within the frame of CLEAN AVIATION 
  David Cruz Palacios, Federico Martín de la Escalera
• [12:05- 12:25] Comparative Study of Strut-Braced and Cantilever Dry-Wing Configurations for LH2-Powered Aircraft: Exploring the Aero-Structural Benefits and Challenges 
  M. Méheut, D. Losada Costoso, F. Moens, O. Atinault, G. Starck, C. Julien, L. Vertonghen, C. Mollet, V. Priasso, A. Lannoo, S. Defoort, E. NGuyen Van, E. Stragiotti, D. Glenis, J. Sodja, S. de Boer, H. Pfander & D. Eisenhut
• [12:25 - 12:45] How to achieve high-rate manufacturing of advanced leading edges using surface technology – erosion protection and demolding 
  Uwe Lommatzsch, Lukas Menzel, Matthias Ott, Dirk Salz, David Cruz and Federico Martín de la Escalera
• [12:45 - 13:05] Modular interfacing of GEMSEO with FlowSimulator towards efficient high-fidelity multidisciplinary design optimization
  Alexandre Scotto Di Perrotolo, Arthur Stück, Sebastian Gottfried, Constantin Höing
• [13:05 - 13:25] Vibration based ice protection systems for high aspect wings 
  Denis Becker, Christopher Davies

• [11:25 - 11:45] Novel hydrophobic epoxy-based coatings containing a sol-gel hybrid material and other additives for aircraft applications
  Viviana Nebbioso, Silvia Roscioli, Miriana Dedes, Claudio Imparato, Aurelio Bifulco, Amedeo Amoresano, Antonio Aronne
• [11:45 - 12:05] Fire-resistant and smoke suppressant multilayer textile material developed through the assistance of AI modelling
  Immacolata Climaco, Jessica Passaro, Viviana Nebbioso, Angelo Casciello, Daniele Battegazzore, Pietro Russo, Claudio Imparato, Aurelio Bifulco, Giulio Malucelli, Antonio Aronne
• [12:05 - 12:25] Modular Construction for Lunar Infrastructure Using Fiber-Reinforced Composites 
  Linda Cortés Satizábal, Kira Heins, Thomas Gries
• [12:25 - 12:45] Off-the-shelf Simulation for Demoldable Mandrels: An Experimental and Numerical Approach to Thermoplastic Shape-Memory Polymers 
  Fabian Neumann
• [12:45 - 13:05] Thermal and pressure digital twins for online process control and data-based optimization of laser-assisted insitu consolidation of vitrimer composite parts 
  Beatriz Gomez, Pablo Romero-Rodríguez, Mario Fernandez-Pedrera
• [13:05 - 13:25] Tailoring the Piezoresistive Response in 3D-Printed Polyetherimide Sensors via Carbon Black/Carbon Nanotube Hybridization 
  Merve Karabal, Ramazan Yuksel, Hulya Cebeci, Alptekin Yildiz

• [11:25 - 11:45] THE AIR PROPELLER IS DRIVEN BY A GEARBOX THAT COMBINES A GAS TURBINE AND AN ELECTRIC ENGINE. PREPARATION FOR TESTS 
  Sergiy Dmytriyev, Oleksandr Korniychuk, Andriy Yedynovych, Oleksandr Kolokolov, Igor Kravchenko
• [11:45 - 12:05] A NOVEL PCHP-COOLING APPROACH FOR AVIATION FUEL CELLS 
  Arne Graf von Schweinitz, Bhavjot Singh Munjal, Xin Gao, Michael Heere
• [12:05 - 12:25] Experiences from designing, authorizing and procuring a liquid hydrogen infrastructure at the laboratory scale 
  Daniel Terlizzi, Abdullah Bamoshmoosh, Gianluca Valenti
• [12:25 - 12:45] The design of a hybrid turbo-electric propulsion (HTEP) with fuel cells for a hybrid regional aircraft (HRA) with a capacity of 80 passengers and a range of 1,000 km, along with the various variants of the HTEP layout 
  Maksym Kirichkov, Oleksandr Yelanskiy, Igor Kravchenko
• [12:45 - 13:05] DESIGN OF A 150-SEATS 2000 KM RANGE LH FUELED JETLINER 
  S. Fil, D. Berbenets, A. Khaustov, O. Urban, O. Bondarchuk
• [13:05- 13:25] On enabling technologies and aircraft design for the greening of aviation 
  L. M. B. C. Campos, J. M. G. Marques, P. G. T. A Serrão

• [11:25 - 11:45] A research-based approach to the standardisation of LCA for the air transport system 
  D. Kan, A. Rahn, E. Scheers, J. Albano, J. Bachmann, S. Diniz L. Paletti
• [11:45 - 12:05] How lightweight design and sustainable aviation fuels can change the European environmental impact of aviation - a simplified case study 
  Peter Brantsch, Janik Maurice Unterlöhner
• [12:05 - 12:25] LCA of trailing edge maintenance – a case study of graphene nanoplatelet-based coating 
  Ana Claudia Nioac de Salles, Ozlem Turkarslan, Feride Nur Sasal, Ana Ramirez de las Heras, Lynn Chikosha, Lidia Lancellotti, Luciano Macera
• [12:25 - 12:45] Uncertainty Quantification in Life Cycle Assessment for Aviation 
  Maria Höller
• [12:45 - 13:05] Identifying barriers and solutions towards the integration of LCA in an aircraft design process 
  L.Paletti, M. Wolff, A. Pohya, G. Wende
• [13:05 - 13:25] Well-to-Wake Emissions of Conventional and Emerging Propulsion Technologies Across Current and Future Scenarios
  Athanasios Pappas, Katerina Margeti, Anastasia Gkika and Elias Koumoulos

• [11:25 - 11:45] Effects of Local Parcel delivery via Drones – A modelled case study 
  Teemu Joonas Lieb, Niklas Peinecke, Gunnar Schwoch
• [11:45 - 12:05] Machine Learning-based resolution of strategic conflicts in U-space airspaces 
  Manuel González Rodríguez, Sandra Amarillo Vañó, Juan Vicente Balbastre Tejedor, Alex Sanchis Marín
• [12:05 - 12:25] On the Assessment of Drone Noise for Sustainable Urban Air Mobility Operations 
  Marco Rinaldi, Saeed Maghsoodi, Stefano Primatesta
• [12:25 - 12:45] UAV formation flight in non-segregated airspace 
  Grzegorz Drupka, Daniel Lichoń, Jacek Pieniążek, Tomasz Rogalski
• [12:45 - 13:05] Proposal of an approach to dimension the protection buffer of different UAS categories for the U-space Separation Management Service (SESAR Project)
  Brando Fraiz, Sandra Amarillo, Álex Sanchís and Juan V. Balbastre
• [13:05 - 13:25] ENSURE – Initial U-SPace / ATM integration
  Julian Alonso

• [11:25 - 11:45] Application of artificial neural networks in unmanned aircraft vehicle control and surveillance system 
  Dariusz Rykaczewski
• [11:45 - 12:05] ERGO: A mature Autonomy Framework for Space Robotics
  Francisco Javier Colmenero Lechuga, Jorge Ocón, Mercedes Alonso, Raquel Jalvo, Javier Ramos
• [12:05 - 12:25] Design and development of deployable astronomical robotic observatories. A new concept in space surveillance and tracking 
  Francisco Ángel Espartero Briceño, Javier Cubas, Ana M. García, Santiago Pindado
• [12:25 - 12:45] Artificial Intelligence for planetary exploration – lessons learned from a decade of analog field tests 
  Andreas Bresser, Raul Dominguez, Wiebke Brinkmann, Melvin Laux, Gunnar Schönhoff, Mehmed Yüksel, Udo Frese, Frank Kirchner
• [12:45 - 13:05] Exoskeleton based microgravity simulation for astronaut training 
  Mathias Trampler, Marc Tabie, Elsa Andrea Kirchner
• [13:05 - 13:25] Toward Reliable Object Tracking in Unstable Conditions: A Deep Learning Approach for UAV Applications 
  Łukasz Popek, Paweł Woźniak, Konrad Barys, Rafal Chałupczyński, Artur Abratański, Jakub Świerk, Rafał Perz

• [14:30 - 14:50] Evolving Needs and Innovations in Aviation Impact Assessment
  Patrick Ratei
• [14:50 - 15:10] Climate Impact Assessment of Future Aircraft Technologies: Methodology Demonstration and Recommendations from the CLAIM Project
  Pascal Bertram
• [15:10 - 15:30] Impact Monitor 2 Framework for Holistic Impact Assessment
  Andrea Mancini
• [15:30 - 15:50] Designing Preliminary Impact Assessments in Impact Monitor 2 Aligned with European Aviation R&I Activities
  Thierry Lefebvre
• [15:50 - 16:30] Exploring the Framework Technologies in Action: Interactive Demonstration and Open Q&A
  Andrea Mancini, Pascal Bertram, Patrick Ratei

• [14:30 - 14:50] Heat Pipe-Assisted Air Cooling for Fuel Cells in Aviation; Heat Transfer Modeling and Design Modifications
  Friedrich Franke, Fabian Kramer, Markus Kober, Stefan Kazula
• [14:50 - 15:10] On the design and operation of the thermal management system of PEMFC-powered aircraft
  Marius Nozinski , Patrick Meyer, Fabian Delony, Jens Friedrichs, Jan Göing, Stephan Kabelac
• [15:10 - 15:30] Assessment of Thermal Management Designs for High Temperature Fuel Cells in Future Aircraft
  Tom-Soeren Stumpp, Mirko Hornung
• [15:30 - 15:50] Concept of a composite folded sandwich core skin-heat-exchanger with experimental investigation of surface temperatures using temperature sensitive paints
  Marvin Tigre Larschow, Simon Thissen, Jakob Gugliuzza, Stefan Zistler, Rico Poser
• [15:50 - 16:10] Thermal design of a composite conformal LH2-tank for aviation
  Arne K. te Nijenhuis, Dylan Vogelsang, Wubbo de Grave, Robin Nieuwenkamp, Bram Noordman, Bert de Wit, Gerben van de Vrie, Rens Ubels
• [16:10 - 16:30] Preliminary Analysis of Compact Heat Exchanger Geometries for Fuel Cell Aircraft Propulsion Systems
  Niccolo' Ferrari , Bernhard Gerl, Matthias Ronovsky-Bodisch, Mavroudis D. Kavvalos, Martin Czekalla, Martin Berens 

• [14:30 - 14:50] Development of an Open Digital Environment for Design and Verification of Hybrid-Electric Architectures 
  Francesco Torrigiani , Fabien Retho, Philippe Barabinot, Andrea Terracciano, Pierpaolo Borrelli, Tim Klaproth, Andrea Masi,Carlos Cabaleiro de la Hoz
• [14:50 - 15:05] A SysMLv2 Ontology for Design and Verification of Hybrid-Electric Regional Aircraft
  Francesco Torrigiani , Jasper Bussemaker, Fabien Retho, Olexiy Kupriyanov, Klara Ziegler, Juan Manuel Lorenzi, Jean-Marie Gauthier, Jean-Christophe Giret, Vito Primavera,Carlos Cabaleiro de la Hoz
• [15:05 - 15:20] Connecting simulation and data management tools through open standard to support hybrid aircraft design
  Klara Ziegler , Rafael Parzeller, Olexiy Kupriyanov, Elias Allegaert, Pierre Brionne, Roland Wüchner, Philippe Barabinot, Juan Manuel Lorenzi, Fabien Retho
• [15:20 - 15:35] A generic tool for multi-fidelity MDO under uncertainty, with application on hybrid electric regional aircraft
  Romain Espoeys , Sylvain Béchet, Jean-Christophe Giret, Matthias De Lozzo, François Gallard, Simone Mancini, Tim Klaproth
• [15:35 - 15:50] Design and Integrated Verification of Hybrid-Electric Power System for Regional Aircraft
  Andrea Terracciano , Pierpaolo Borrelli, Elias Allegaert, Gerardo Carbonaro, Danilo Ciliberti, Vito Primavera, Alfredo Renzetti, Fabien Retho, Novella Saccenti
• [15:50 - 16:10] A Multi-Disciplinary Approach to Concurrent Aerostructural and On-Board System Design for a distributed propulsion HER configuration
  Simone Mancini , Tim Klaproth, Reinhold Maierl, Ögmundur Petersson, Jean-Christophe Giret, Sylvain Bechet
• [16:10 - 16:30] Development and integration of a Flight Dynamics module into the ODE4HERA Open Digital Platform
  Danilo Ciliberti , Agostino De Marco, Fabrizio Nicolosi 

• [14:30 - 14:50] Morphological and mechanical analysis of self-healing thermosetting load-bearing resins 
  Marialuigia Raimondo , Elisa Calabrese, Luigi Vertuccio, Liberata Guadagno
• [14:50 - 15:10] Towards the Development of Sustainable Thermosetting Composites for Aeronautics 
  Raffaele Longo , Luigi Vertuccio, Francesca Aliberti, Elisa Calabrese, Marialuigia Raimondo, Roberto Pantani, Liberata Guadagno
• [15:10 - 15:30] Epoxy Nanocomposites for Lightweight Hydrogen Storage Tanks: From Processing to Performance 
  Giorgia De Piano , Raffaele Longo, Liberata Guadagno, Roberto Pantani
• [15:30 - 15:50] Electro-Healing of polymer nanocomposites for aeronautical composite structures 
  Francesca Aliberti , Raffaele Longo, Luigi Vertuccio, Marialuigia Raimondo, Andrea Sorrentino, Roberto Pantani, Liberata Guadagno
• [15:50 - 16:10] Smart design of a Next Generation structural material based on carbon nanoparticles and epoxy matrix 
  Luigi Vertuccio , Michelina Catauro, Marialuigia Raimondo, Liberata Guadagno
• [16:10 - 16:30] -

• [14:30 - 14:50] BATTERY-POWERED AIRCRAFT: TECHNOLOGIES AND DESIGNS 
  María ZAMARREÑO SUÁREZ , Rosa María ARNALDO VALDÉS, César GÓMEZ ARNALDO, Raquel DELGADO-AGUILERA JURADO, Francisco PÉREZ MORENO, and Víctor Fernando GÓMEZ COMENDADOR
• [14:50 - 15:10] Effects of long-term impact of the use of SAF: evaluation of SAF ecological properties for reducing pollutants 
  Renata Adami , Hetal Parmar, Patrizia Lamberti, Maria Sarno, Vincenzo Tucci
• [15:10 - 15:30] EFACA aircraft noise in flight and ground operations on a roadmap to ACARE noise goals 
  Oleksandr Zaporozhets, Andrzej CHYLA, Kateryna KAZHAN, Vitalii MAKARENKO, Vadim TOKAREV
• [15:30 - 15:50] EFACA aircraft local and global emissions on a roadmap to ACARE goals 
  Kateryna Synylo , Vitalii Makarenko, Andrii Krupko, Oleksandr Zaporozhets, Vadim Tokarev
• [15:50 - 16:10] PROSPECTS FOR A MORE SUSTAINABLE AVIATION: ROAD MAP TOWARDS 2050 
  María ZAMARREÑO SUÁREZ , Rosa María ARNALDO VALDÉS, Raquel DELGADO-AGUILERA JURADO, César GÓMEZ ARNALDO, Francisco PÉREZ MORENO, and Víctor Fernando GÓMEZ COMENDADOR
• [16:10 - 16:30] Closing Discussion: Prospects for meeting EU/ICAO green aviation targets 
  Rosa María Arnaldo Valdes , María Zamarreño 

• [14:30 - 14:50] Eco-Design and Life Cycle Assessment for Hybrid Electric Aircraft 
  Thomas Felix Reichert , Peter Brantsch, Gabriela Gromer
• [14:50 - 15:10] LCA and LCC activities in Clean Aviation HERA project 
  Marco Fioriti , Marco Borghi, Guido Pavan
• [15:10 - 15:30] Critical and relevant raw materials for aviation with the focus on GWP for hybrid electric aircraft applications 
  Peter Brantsch , Gabriela Gromer
• [15:30 - 15:50] Life Cycle Assessment Activities in HERFUSE project 
  Mario Antonio Solazzo , Deborah Neumann De La Cruz, Umberto Carrotta, Lidia Travascio and Angela Vozella
• [15:50 - 16:10] OVERCOMING CHALLENGES IN LCA OF NEW TECHNOLOGIES: AN OVERVIEW OF CURRENT ACTIVITIES TO FUTURE INTEGRATION IN AIRBUS DEFENCE AND SPACE 
  Deborah Neumann de la Cruz , Valentin de Pablo, Julien Weber, Ariane Bouilly
• [16:10 - 16:30] Life Cycle Assessment of Innovative Propulsion Technologies for Regional Aviation 
  Felicia Molinaro , Marco Fioriti 

• [14:30 - 14:50] pyTOM: A python-based Multicriterial Optimization Framework for Aircraft Trajectories in large Traffic Scenarios (SESAR Project)
  Maximilian Mendiguchía Meuser , Thorsten Ehlers, Alexander Lau, Benjamin Lührs, Ruben Grunau, Rouven Kanitz
• [14:50 - 15:10] A Structured Methodology for Resolving Capacity-Quality-of-Service Interdependencies in SESAR Performance Management 
  Christian Verdonk Gallego , Jose Manuel Cordero García
• [15:10 - 15:30] SESAR - IFAV3 - Solution 1c "Smart Sector Grouping" 
  Mariano Rubio Díaz , Teresa Arangüete, David Rodriguez-Madridejos, Jose Manuel Rísquez
• [15:30 - 15:50] Introducing a Safety Assessment to support the safe and efficient integration of launch and re-entry operations in Europe 
  Lorenz Losensky , Tobias Rabus, Nicolas Fota, Maria Buzatu, Christopher Brain, Augustin Udristioiu
• [15:50 - 16:10] A behavioral economics approach to demand management for the airport capacity problem 
  Álvaro Rodríguez-Sanz , Luis Rubio Andrada
• [16:10 - 16:30] ECHOES DES DSD (SESAR Project)
  Gabriel García 

• [14:30 - 14:50] Overview of research on multi-robot teams for space applications in Europe 
  Wiebke Brinkmann , Malte Wirkus, Carlos J. Pérez-del-Pulgar, Miguel Olivares-Mendez
• [14:50 - 15:10] Protoyping and testing System Interconnect standard Interoperable for Orbital Services 
  Raphael Boissonnade , Montserrat Diaz-Carrasco, Matisse Briand, Mathieu Deremetz, Thomas Schervan, Mehmed Yüksel
• [15:10 - 15:30] DFKI-X2D – Design and Testing of a Quasi-Direct Drive Motor for Space Applications 
  Jonas Eisenmenger , Zhongqian Zhao, Pierre Willenbrock
• [15:30 - 15:50] Data-Driven Modeling of Robot-Terrain Interaction for Terrain Classification and Enhancing Rigid Body Simulation Accuracy 
  Malte Wirkus , Malte Langosz, Julian Liersch, Marc Otto
• [15:50 - 16:10] High-fidelity 3D reconstruction for planetary exploration 
  Alfonso Martínez Petersen, Levin Gerdes, David Rodríguez-Martínez, Carlos Pérez-del-Pulgar
• [16:10 - 16:30] EU-RISE: In-space assembly and maintenance robotics for future space ecosystems 
  Montse Diaz-Carrasco, Lucia Ballesteros, Marc Manz, Thierry Germa, Manuel Meder, Elie Allouis, Romain Caujolle, Thomas Secretin, Nikoletta Triantafyllopoulou 

• [10:30 - 10:50] Digitalization in composite manufacturing and its impact on sustainability (TOSCA Project)
  Christian Eitzinger
• [10:50 - 11:10] Automated Tape Laying process monitoring for optimizing insitu consolidation of next-generation aerostructures (COMPSTLAR Project)
  Pablo Romero Rodríguez
• [11:10 - 11:30] Leveraging Photonic Integrated sensors and vitrimer formulations in induction welding to advance composite aero structures (PLEIADES Project)
  Harry Zervos
• [11:30 - 11:50] Smart Manufacturing in AFP: Predicting Composite Quality Through Process Data (GENEX Project)
  Carlos Mallor
• [11:50 - 12:10] Multiscale Machine learning approaches for industrial scale simulation of composite manufacturing processes (DIDEAROT Project)
  David Dumas
• [12:10 - 12:30] Hyperconnected simulation ecosystem supporting probabilistic design and predictive manufacturing of next generation aircraft structures (CAELESTIS Project)  
  Cristian Builes Cárdenas 

• [10:30 - 10:50] Hydrogen Engine – Engine oil systems heat modelling for fuel conditioning 
  Benoit Said , Christos Mourouzidis, Pavlos Rompokos, Adriano Isoldi, Ioannis Roumeliotis, Vassilios Pachidis
• [10:50 - 11:10] Influence of Variable Guide Vane angle on compressor surge events 
  Sarath Marokky , Sajal Kissoon, Lucas Pawsey, Christos Mourouzidis, Vassilios Pachidis
• [11:10 - 11:30] Enhanced Shaft Power Transfer Strategies in Geared Turbofan Engines, Highlighting Synergies with Conventional and More Electric Adaptive Cycle Systems 
  Sara Alao , Ioannis Roumeliotis, Vassilios Pachidis, Christos Mourouzidis, Pavlos Rompokos, Raj Ghelani, Sajal Kissoon
• [11:30 - 11:50] Weight optimization of intermediate heat transfer system for hydrogen fuel conditioning in aviation 
  S. Koumtzis , I. Roumeliotis, C. Mourouzidis, P. Rompokos, V. Pachidis
• [11:50 - 12:10] Application of the Pseudo-Spectral Time-Marching method to fan design problems 
  Jesus Matesanz-Garcia , Roque Corral
• [12:10 - 12:30] Architecture exploration and whole engine design study for free piston integrated Composite Cycle Engine 
  Yu-Hsuan Lin , Florian Winter, Alexandros Lessis, Fabio Witzgall, Arne Seitz 

• [10:30 - 10:50] HERA Project 
  Giuseppe Piscopo
• [10:50 - 11:10] HERWINGT Project 
  Sebastian Pellicer
• [11:10 - 11:30] HERFUSE Project 
  Fabrizio Leone
• [11:30 - 11:50] ODE4HERA Project 
  Carlos Cabaleiro de la Hoz
• [11:50 - 12:10] HECATE Project 
  Daniel Izquierdo Gil
• [12:10 - 12:30] Roundtable Discussion

• [10:30 - 10:50] A coupled ProLB-Nastran solver for fluid-structure interaction in aeronautics 
  Robin Jaeger , Jérôme Jacob, Isabelle Cheylan, Denis Ricot, Yves Detandt, Julien Favier
• [10:50 - 11:10] Efficient Wall-Modelled Large Eddy Simulation for Fluid-Structure Interaction using Homogenized Hybrid Recursive Regularized Lattice-Boltzmann Methods 
  Fedor Bukreev, Adrian Kummerländer, Stephan Simonis, Mathias J. Krause
• [11:10 - 11:30] Pre-Experimental Aerodynamic Design Study For a High-Lift Wing Model under Rigid Conditions using WM-LES Lattice Boltzmann Method 
  Malav Soni , Roland Ewert, Jan Delfs
• [11:30 - 11:50] Towards Automatic Code Generation of Adjoint Lattice Boltzmann Methods for Fluid-Structure Interaction 
  Adrian Kummerländer , Shota Ito, Fedor Bukreev, Stephan Simonis, Mathias J. Krause
• [11:50 - 12:10] Surrogate model for fluid-structure interaction using latent space representation 
  Jean-Baptiste Labro , David Zarzoso, Jérôme Jacob, Julien Favier
• [12:10 - 12:30] Cinematic visualisation of high-fidelity CFD simulations 
  Ondrej Meca , Tomas Brzobohaty, Lubomir Riha 

• [10:30 - 10:50] Circularity performance assessment of novel aircraft configurations 
  L. Paletti, V. Charalampopoulou, D. Markatos, A. Filippatos, A. Pohya, G. Wende
• [10:50 - 11:10] Writing well-formed requirements for the successful design of sustainable long-range aircraft: a structured approach 
  Luca Boggero , Harry Psihoyos, Dionysios Markatos, Ligeia Paletti, Gerko Wende, Angelos Filippatos, Björn Nagel
• [11:10 - 11:30] Identification of Sustainability-related Stakeholder Needs and Requirements for the Conceptual Design of Future Long-Range Aircraft 
  Dionysios Markatos , Harry Psihoyos, Ligeia Paletti, Luca Boggero, Bram Peerlings, Elise Scheers, Lukas Soffing, James Page, Spiros Pantelakis, Angelos Filippatos
• [11:30 - 11:50] Towards a European Flying Testbed – Governance models and funding strategies
  Harry Psihoyos, Thomas Kalampoukas, Dionysios Markatos, Pierluigi Ianneli, Lorenzo Pellone, Marco Armbrust, Andreas Strohmayer, Spiros Pantelakis, Angelos Filippatos
• [11:50 - 12:10] Advancing Sustainable Product Development in aviation: the SUSTAIN Project 
  Pauline Léonard
• [12:10 - 12:30] Comparison of Metallic and Composite Hydrogen Storage Tanks Using Life Cycle Assessment in Ecodesign 
  Andrea Pettersen Helåsen , Angela D. La Rosa, Sotirios Grammatikos 

• [10:30 - 10:50] Insights into Conflict Detection & Resolution Integration in AI- Enhanced Air Traffic Control systems (SESAR Project)
  Javier A. Pérez-Castán , Álvaro Albalá Perera, L. Pérez-Sanz, Lidia Serrano-Mira, Tomislav Radišić and Ivan Tukarić
• [10:50 - 11:10] Global Impact of Aviation Contrails 
  Octavian Thor Pleter , Cristian Emil Constantinescu
• [11:10 - 11:30] AI-Driven Aviation Weather Forecasting: Enhancing ATM Resilience to Meteorological Disruptions (SESAR Project)
  Aniel Jardines
• [11:30 - 11:50] Transitioning Ground Handling Fleets Towards Low-Emission Operations at Airports 
  Raquel Alonso-Pedrero , Miguel Muñoz-Ortiz, Yash Raka
• [11:50 - 12:10] Strategic Fuel Planning for Aerodynamic Formation Flight: Quantifying Delay Flexibility for Rendezvous Success 
  Majed Swaid , Volker Gollnick
• [12:10 - 12:30] Preliminary Study on the Impact of the Ad Hoc Separation Concept in Free Route Airspace 
  Lidia Serrano-Mira , Marta Sánchez-Aguilera Roncero, Javier A. Pérez-Castán, Eduardo S. Ayra, Marta Pérez Maroto, Luis Pérez Sanz 

• [ 10:30 - 10:50] Introducing ASTRAIOS: Goals, Vision, and Impact 
  Mari Kolehmainen
• [10:50 - 11:10] Mapping and Curating Space Education: From ASTRAIOS Educational Web Catalogue to Newly Developed Training Materials 
  Yolla Al Asmar
• [11:10 - 11:30] Mapping the European Space Workforce 
  Heidi Thiemann
• [11:30 - 11:50] Skills Gap Analysis in the European Space Sector: Educational, Demographic, and Strategic Insights from ASTRAIOS 
  Christie Maddock
• [11:50 - 12:10] Pathways into Space: Real Voices and Journeys from the ASTRAIOS Project 
  Grazia Fiore
• [12:10 - 12:30] Environmental, Social and Governance Practices within the European Space Sector: Key Insights from the Peer-to-Peer Learning Workshop Series and the ASTRAIOS Business Community 
  Cristina Ramos 

• [13:30 - 13:40] CAELESTIS Introduction & Overview
• [13:40 - 13:50] CAELESTIS: a data-driven framework for scalingup permeability prediction in composite materials  
  Guillaume Broggi
• [13:50 - 14:00] ML-based method for in-situ modification of the fiber placement process for improved impregnation in RTM
  Ivan Ruiz Cozar

• [14:00 - 14:20]

  • HPC-based simulation ecosystem using workflows
  • An HPC-enabled framework for synthetic data generation and large-scale mechanical simulations of composite structures 

  Gerard Guillamet

• [14:20 - 14:40] Bridging Experimental and Numerical Testing for Mechanical Performance Assessment of the Outlet Guide Vane Using a Building Block Approach
  Aravind Sasikumar
• [14:40 - 15:00] Connecting AFP to RTM through a permeability surrogate model and processes simulations of an Outlet Guide Vane with uncertainty management 
  Tanguy Moro, Francisco Serrano

• [15:00 - 15:15]

  • Characterization of dissimilar Titanium/Carbon fiber unions in One-shot Resin Transfer Molding for aeronautic components
  • Transforming Aircraft Design in CAELESTIS: Digital Twins in Action 

  Cristian Builes

• [15:15 - 15:30] Discussion of Future Use
  Estelle Castanet , Sibin Saseendran

• [13:30 - 13:50] Elaboration and Evaluation of Concepts for Battery Modules in Electrified Aircraft Propulsion Systems 
  Alperen Oguzhan Altun , Florian Franke and Stefan Kazula
• [13:50 - 14:10] Sensitivity of LH2 aircraft refuelling to process and storage tank parameters 
  Francesco Mastropierro , Enrico De Betta, Damiano Tormen, Michele De Gennaro
• [14:10 - 14:30] Cryogenic Propulsion Systems for Hydrogen-Electric Powered Aircraft 
  Christian Bentheimer , Bernd Eckardt, Florian Bayer
• [14:30 - 14:50] Solid Oxide Fuel Cell Performance and Sizing Model for Novel Aircraft Propulsion Conceptual Design 
  Christopher Warsch, P. Maas, A. C. Mejias, F. Winter, M. Fikry, A. Seitz, M. Hornung
• [14:50 - 15:10] Numerical Modeling of Annular-Mist Flow Within a Water Recovery Unit 
  Georgios Iosifidis , Richard Haidl, Jonathan Gloger, Koji Hasegawa, Bernhard Weigand
• [15:10 - 15:30] -

• [13:30 - 13:50] Innovative technologies for fuselages and empennages 
  Tamara Rodriguez Gómez
• [13:50 - 14:10] Multispar high integrated structures 
  Rubén Ródenas Vicente
• [14:10 - 14:30] Hybrid electric overall powerplant integration 
  Santiago Lopez Gordo
• [14:30 - 14:50] Electrification challenges of regional aircraft 
  Daniel Izquierdo Gil
• [14:50 - 15:10] Active wing control 
  Alan Serena
• [15:10 - 15:30] Wing Tunnel model for gust response and flutter experiments 
  Francesco Toffol

• [13:30 - 13:50] Sustainable and efficient manufacture for hollow propeller blades from carbon fiber-reinforced plastic and lost salt core in HP-RTM Process 
  Feiyun Zhang , Michael Wilhelm, Tatjana Vaccaro, Markus Reeb
• [13:50 - 14:10] Unlocking the Future of Aircraft Manufacturing: The Economic and Environmental Benefits of Laser Patterning for Surface Enhancement of Aircraft certified alloys 
  Luis Antonio Sanchez de Almeida Prado, Selim Coskun ,Anne-Laure Cadène, Ramón Angel Antelo Reguengo, Jake Carter, Kyle Ito, Minok Park and Vassilia Zorba
• [14:10 - 14:30] Influence of AFP Defects on Damage Tolerance: Effect of Coupon 
  Leith Afilal , D.M.J Peeters, J.A. Pascoe, R.C Alderliesten
• [14:30 - 14:50] Innovative Heating and Automated Welding of Vitrimer-Based Composites for Aerospace Applications 
  Enrico Chemello , Massimiliano Russello, Mohsen Bahrami
• [14:50 - 15:10] Enhancing composite joining in aerospace: role of energy directors in ultrasonic welding 
  Mohsen Bahrami , Marta Juanatey Muradas, Massimiliano Russello, Enrico Chemello 
• [15:10 - 15:30] -

• [13:30 - 13:50] OVERLEAF introduction, Hydrogen Tank Overview & Concept 
  Emma Lope Retuerto
• [13:50 - 14:10] AUTOMATED MANUFACTURING OF THERMOPLASTIC COMPOSITES FOR HYDROGEN STORAGE 
  Xabier Perez Ferrero , Prasad Shimpi, Beatriz Gomes, Ivette Coto, Mario Fernandez Pedrera, Pablo Romero Rodriguez
• [14:10 - 14:30] PA11 CF Composite Material for Cryogenic Tank 
  Gilles Hochstetter
• [14:30 - 14:50] Comparison of Metallic and Composite Hydrogen Storage Tanks Using Life Cycle Assessment in Ecodesign 
  Andrea Pettersen Helåsen
• [14:50 - 15:10] Building Block Approach and validation process for the structural design of type V tank for Liquid Hydrogen 
  Quirze Abella Travesset , Jordi Renart Canalias, Albert Turon Travesa, Jose Manuel Guerrero Garcia, Pau Miquel Roura
• [15:10 - 15:30] Final Results and Conclusions 
  Emma Lope Retuerto 

• [13:30 - 13:50] Developing a Sustainable Product Footprint Declaration (SPFD) system in the aerospace industry for enhanced sustainability communication and transparency 
  Johanna Nylander
• [13:50 - 14:10] Assessing the costs and environmental impacts of a cryogenic H2 tank demonstrator 
  Christian Bülow , Karina Kroos
• [14:10 - 14:30]Life Cycle Assessment and Costing of Thermoplastic Composite Aircraft Component with Digital-Assisted Repair Technologies 
  Evangelia Stamkopoulou , Anastasia Gkika, Emmanuil Markakis, Foteini Petrakli, Elias P. Koumoulos
• [14:30 - 14:50] Material-based Aerostructural Optimization of High-Aspect-Ratio Wings for reducing Life Cycle Environmental Impact 
  Shantanu Sapre , Ousmane Sy, Joseph Morlier, Emmanuel Benard, Christian Gogu
• [14:50 - 15:10] Rigid Polyurethane Foams for Cryogenic Insulation – Introducing Phase Change Materials into Sustainable 
  Laima Vevere , Beatrise Sture-Skela, Vanesa Dhalivala, Vladimir Yakushin, Ugis Cabulis
• [15:10 - 15:30] -

• [13:30 - 13:50] UAV Guidance with Concurrent Evasion and Terminal Angle Constraints 
  Ekrem Berkcan Bavbek , İlker Murat KOÇ
• [13:50 - 14:10] The aviation equipment verification process on the example of the PPM-GA fuel gauge 
  Damian Liszewski , Nezar Sahbon
• [14:10 - 14:30] Introducing Adaptation And Artifact-Based Process Validation Into Avionics Certification Process 
  Sebastian Rutkowski, Ewelina Szpakowska-Peas
• [14:30 - 14:50] Countering Drones with Autonomous Cooperative Drone Swarms via Multi-Agent Deep Reinforcement Learning 
  Ender Çetin, Cristina Barrado, Jose Luis Muñoz Gamarra, Juan Jose Ramos Gonzalez
• [14:50 - 15:10]Development of Attitude Control Algorithms for OPS-SAT: A Comparative Study of PID and Fuzzy Controllers 
  Karl Olfe , Cristian Flores, Juan Carlos Crespo, María Royo, Alí Arshadi, Álvaro Bello, Victoria Lapuerta
• [15:10 - 15:30] -

• [13:30 - 13:50] GaN Solid-State amplifier developments for multi-orbit broadband active-antenna front-ends 
  Gorka Rubio-Cidre, Mario Ramírez-Torres, Alvaro Morso-Granero, Francesco Scappaviva, Alessio Facchini, Andrea Biondi
• [13:50 - 14:10] High-Power RF Solid-State GaN Amplifiers for Spaceborne Applications 
  Francisco de Arriba , Lorena Cabria, Rocío García, Jorge Madrazo, Ismael Traseira, Irene Martín, Reinel Marante and Alejandro Pila
• [14:10 - 14:30] Design, Validation, and Integration of a Ka-Band Receiver System Using COTS Components for Satellite Front-End Applications 
  Nieves García , Aintzane Lujambio, Beatriz Aja, Luisa de la Fuente, David Lobato
• [14:30 - 14:50] RF transmit and receive MMIC front-end for V-band inter-satellite link 
  Patrick Longhi , Mattia Riccardi, Andrea Ricci, Giulio Venanzoni, Rocco Giofrè, Francesco Vitulli, Ernesto Limiti
• [14:50 - 15:10] UC3M ST3LLARsat1 “Boira” CubeSat: On-Board Computer Development 
  Cristian Suaero , Andrés Marcos
• [15:10 - 15:30] The camera systems of the small satellite ROMEO 
  Dominik Starzmann

• [16:00 - 17:00] Voices in Horizon Europe Aviation Research
  Janusz Poplawski, Carlos Mallor Turon, Emma Celeste Lope Retuerto, Pablo Rodriguez
• [17:00 - 17:45] Panel Discussion: “Beyond CAELESTIS: Integrating Virtual Design, Lightweight Materials & HPC for the Future of Aviation"
  Janusz Poplawski, Julian de Marchi, Luca Briganti, Cristian Builes
• [17:45 - 18:00] Closing Remarks
   

• [16:00 - 16:20] A method for installation losses in preliminary design tools 
  Francesco Antonio D'Aniello, Tommaso Scuderi, Donato de Rosa, Anna Occhipinti
• [16:20 - 16:40] Future High-Efficient Engines with Solid Oxide Fuel Cell - Gas Turbine Coupling: System Modeling and Comparison of Directly and Indirectly Coupled SOFC-GT-Systems 
  P. Köhler , J. Hollmann, A. Taissir, S. Kabelac, M. Richter, M. P. Heddrich
• [16:40 - 17:00] Controlling a Dynamic Fuel Cell System for the Propulsion of a Regional Aircraft 
  Niclas A. Dotzauer
• [17:00 - 17:20] Methodology for Combined Propulsion System Sizing and Aircraft Performance Evaluation 
  Philipp Maas , Christopher Warsch, Arne Seitz, Mirko Hornung
• [17:20 - 17:40] Experimental Validation and Numerical Simulation of a High-Efficiency Composite Propeller for a Medium-Weight VTOL UAVs 
  Małgorzata Wojtas, Przemysław Wyszkowski, Mirosław Mądro, Włodzimierz Balicki
• [17:40 - 18:00] Degradation-Aware Preliminary Sizing and Control Framework for Hybrid Fuel Cell-Battery Systems in Regional Aircraft 
  Paolo Aliberti , Emina Hadžialić, Marco Sorrentino, Helmut Kühnelt  

•   [16:00 - 16:20] Immunity Analysis of Hydrogen Fuel Cell Stack for Aeronautical Applications 
  Giovanni Fasulo , Simone Gallas, Hervé Denayer, Oskar Ekblad, Giancarlo Kosova and Mattia Barbarino  
• [16:20 - 16:40] High-Efficient and Compact Electronic Controlled Fuel Cell Air Supply System 
  Nejat Mahdavi , R. De Maglie, A. Lacoste  
• [16:40 - 17:00] A Parametric APDL-Based Workflow for Efficient Structural Design of a Civil Aircraft Tailplane 
  C. Palumbo, G. Perillo, A. Sodano, D. Cristillo, M. Belardo, A. Chiariello  
• [17:00 - 17:20] Performance Analysis of a Hybrid-Electric Regional Aircraft Demonstrator Using JPAD and Simcenter Amesim 
  Vincenzo Cusati , Mario Di Stasio, Fabien Retho, Fabrizio Nicolosi, Rocco Gentile, Valeria Vercella  
• [17:20 - 17:40] Protecting High-Voltage power distribution center for More Electric Aircraft 
  G. Barroso de María , G. Robles, J.M. Martínez Tarifa, J. Escrihuela, D. Izquierdo, G. Salinero  
• [17:40 - 18:00] Actuation system design for a compliant morphing trailing edge flap at demonstrator and full-size level 
  M. Chiara Noviello , B. Galasso, L. Frettoloso, S. Ameduri  

•  [16:00 - 16:20] Virtual Manufacturing Finite Element Framework for Defect Prediction in Resin Impregnation Processes 
  Giorgio Maria D'Orazi , Antonio Raimondo, Andrea Cini
• [16:20 - 16:40] The Cold Spray Process for Structural Repair and Additive Manufacturing in Aeronautics 
  M. Guagliano , A. Heydari, A. Ardeshiri, S.Bagherifard
• [16:40 - 17:00] A Modular Assembly Concept for Large-Volume CRFP Hydrogen Tanks for Passenger Aircraft 
  Karina Görner , Benjamin Diehl, Simon M. Kothe
• [17:00 - 17:20] MODELING OF FULL SCALE ROTOR BLADE WITH ACTIVE TWIST CONTROL 
  Andrejs Kovalovs
• [17:20 - 17:40] Manufacturing of a Thermoplastic Drop Nose Device within the frame of CLEAN AVIATION 
  Ramón Junco Molpeceres 
• [17:40 - 18:00] -

• [16:00 - 16:10] Introduction of BeCoM Project 
  Feijia Yin
• [16:10 - 16:25] Qualification of Water Vapor Observations in the Aircraft Flight Region as Part of the BeCoM Project 
  Philippe Keckhut , Dunya Alraddawi, Guillaume Payen, Sidy Diarra, Jean-Charles Dupont, Antoine Farah, Alexis Poignard, Jean-Luc Baray, Nadège Montroux, Florian Mandija, Abdanour Irbah, Florian Lapouge, Michael Sicard, Alain Sarkissian, Alain Hauchecorne, Milena Martic
• [16:25 - 16:40] Assimilation of satellite, camera and air borne cloud and humidity observations in the global data assimilation system of the German Weather Service 
  Alexander Cress
• [16:40- 16:55] Robust AI-based contrail detection in remote observations 
  Teodora Petrisor , Davide di Giusto, Edgar Loza, Simon Fossier, Vincent Meijer
• [16:55 - 17:15] Comparison of aircraft trajectory optimization strategies reducing contrail formation under different weather conditions 
  Federica Castino , Volker Grewe, Hiroshi Yamashita, Katarina Grubbe Hildebrandt, Feijia Yin
• [17:15 - 17:35] Integrating climate policies into air transport operations: Challenges, Risks, and Impacts 
  Malte Niklaß , Z. Zengerling, K. Kölker, M. Mendiguchia Meuser, T. Ehlers, A. Lau, R. Eichinger, K. Dahlmann, S. Matthes, V. Grewe, F. Yin, A. Stefanidi, T. Roetger, F. Crova
• [17:35 - 18:00] From uncertainty to confidence intervals for mitigation potentials of climate-optimized aircraft trajectories (SESAR Project)
  Sigrun Matthes , Simone Dietmüller, Patrick Peter, Zarah Zengerling, Maximilian Mendiguchia Meuser, Benjamin Lührs, Alexander Lau, Abolfazl Simorgh, Oumarou Moussa Bola, Manuel Soler, Katarina Hildebrandt, Federica Castino, Feijia Yin 

•   [16:00 - 18:00] Workshop   

The workshop addresses “how to design for sustainability” and continue the workshop at EASN 2024.  Recent research will be introduced at the workshop and some preliminary gaps identified. The aim of the workshop is to discuss in groups the approaches needed and practices for how to bring high level ambitions and targets down to concrete criteria that drives next generation aerospace products and solutions.

It’s expected that the workshop participants both get exposed to trade off approaches in design and contribute to form practical ways to design for sustainability in aerospace contexts. The approaches take a strategic and systemic perspective.

Expected outcome:

• Learn and discuss design approaches dealing with conflicting objectives and trade off’s when designing for sustainability.  
   

•   [16:00 - 16:20] Testing Spacecraft Attitude Control with Fuzzy Logic in a Relevant Environment: Insights from the FuzzyBuzz Experiment 
  Alí Arshadi , María Royo, Juan Carlos Crespo, Cristian Flores, Karl Olfe, Ana Laverón, Victoria Lapuerta
• [16:20 - 16:40] Development of a microsatellite 3-Reaction Wheel ADCS FlatSat: the MLPLUS project 
  David Gómez Torija , Ghasem Sharifi, Andrés Marcos
• [16:40 - 17:00] Beacon Number Optimization in Deep-Space Optical Navigation 
  Abdurrahim Muratoglu , Halil Ersin Söken
• [17:00 - 17:20] Identification of Requirements for a Simulation Framework to Support Development and Testing of Integrated Navigation Systems 
  Krystian Borodacz
• [17:20 - 17:40] Enhancing Pilot Situational Awareness through an Eye-Tracking Assisted Adaptive Interface
  Eleftheria Lito Michanetzi, Angelos Fotopoulos, Dimosthenis Minas, Michalis Xenos  
• [17:40 - 18:00] -

• [16:00 - 16:20] Satellite and Mobile Network Operator Cooperation Models for Efficient Handover in 5G-TN-NTN 
  Tedros S. Abdu , Eva Lagunas, Flor Ortiz, Jorge Querol, Marcele O. K. Mendonca, Ons Aouedi
• [16:20 - 16:40] Multilayer Satellite Constellation Design for Multipurpose Applications 
  Ernestina Cianca , Mansoor Jamal, Tommaso Rossi, Mauro De Sanctis
• [16:40 - 17:00] Using a MEga COnstellation Emulator (MECO) to Emulate IP-Based Satellite Networks 
  Stefano Salsano, Max Miraftab, Cesare Roseti, Luca Fiscariello, Ernestina Cianca, Mauro De Sanctis, Lorenzo Bracciale, Andrea Mayer, Pierpaolo Loreti
• [17:00 - 17:20] Integrated Ground-UAS and UAS-Satellite Communications in 6G: Architecture and Challenges in Terrestrial-Non-Terrestrial Network Convergence 
  Anastasia Yastrebova-Castillo, Sami Tocklin,  Heikki Kokkinen, M. Asad Ullah, Marko Höyhtyä, Mikko Majanen
• [17:20 - 17:40] Autonomous Earth Observation Constellation for Intelligent Target Scheduling 
  Antonio Manuel Mercado-Martínez , José Blanco-Chica, Antonio Jurado-Navas, Beatriz Soret
• [17:40 - 18:00] -  

• [11:00 - 11:20] Introduction and Overview 
  Olga Eisman
• [11:20 - 11:40] EICACS: A standard framework for Collaborative Air Combat
  Miguel Enríquez Arosa, Raquel Delgado-Aguilera Jurado
• [11:40 - 12:00] EPIIC and Innovative Interaction Modalities
  Pablo Miguel Rodríguez Rey
• [12:00 - 12:20] NG-MIMA: The stage for the future of military integrated modular avionics in Europe
  Santiago Lozano Terrol
• [12:20 - 12:40] MYRIAD: Multi-source information sYstem based on Remote sensing aI Analytics to support the strategic Defence domain
  Miguel Ángel Molina

• [12:40 - 13:00] HYDEF: European Hypersonic Defence Interceptor
  Sergio Aladrén Alboreca

   

• [11:00 - 11:20] Estimating the maintenance-related material cost for battery-powered aircraft propulsion systems 
  Jan-Alexander Wolf, Robert Meissner, Ahmad Ali Pohya, Gerko Wende
• [11:20 - 11:40] Test results for a 200 kW two-phase pumped cooling system demonstrator for aerospace applications 
  Henk Jan van Gerner , Sigurd Scholten, Charlton Castro, Georg Mühlthaler, Marcus-Benedict Buntz
• [11:40 - 12:00] Early-stage considerations of traction battery placement in small, commercial aircraft 
  Annika Staats, Andreas Bardenhagen
• [12:00 - 12:20] Improve operating characteristics by exploiting speed variability of individually driven rotors in vaneless counter rotating axial compressor concepts for hybridised regional air- and rotorcraft application 
  Jan Nittka, Dieter Peitsch
• [12:20 - 12:40] Numerical investigation of unsteady fluid flow inside air cooling lines with tilted heat exchanger for electrified aero engines 
  Prabhjot Singh, Florian Nils Schmidt, Sebastian Merbold, Ralf Rudnik, Stefanie de Graaf

• [12:40 - 13:00] -

   

• [11:00 - 11:20] CFD modelling of di-phasic refrigerant inside an aircraft Skin Heat Exchanger as a condenser for Hybrid-Electric Regional Aircraft 
  Iván González-Nieves , Andrés Felgueroso-Rodríguez, Miguel Díaz-Barja
• [11:20 - 11:40] Aeroacoustic Performance Evaluation of Mixed-Flow Fans for Next Generation Hybrid Electric Regional Aircraft 
  Pela Katsapoxaki, Dominik Christ, Ruben Hernandez, El Hassan Ridouane
• [11:40 - 12:00] Carbon Heating System: A Next-Generation Electrical Temperature Control System for Cabin Heating 
  Marc Ahlburg, Josef Ostermayer, Markus Pollmann, Pela Katsapoxaki
• [12:00 - 12:20] The potential roles of 2-phase mechanically pumped loops (2F-MPL’s) in Hybrid and Electrical Aircraft Thermal Management 
  Johannes van Es , Julian Biesheuvel, Wouter Blom, Charlton Castro, Aswin Pauw, Guilhem Delpu, Fatima Cherdouh, Esli Trejo Peimbert, Ricardo Gantus, Pierre Trolliet, Guillaume Galzin, Laurent Labaste Mauhe, Vincent Dupont, Christian Popper
• [12:20 - 12:40] Modelling comparison of a Two-phase Mechanically Pumped Loop (2F-MPL) with a conventional water-glycol 1F-MPL’s for Fuel Cell cooling in Thema4HERA 
  Tim de Weijer, Johannes van Es, Julian Biesheuvel, Guilhem Delpu, Fatima Cherdouh, Esli Trejo Peimbert, Ricardo Gantus, Pierre Trolliet, Guillaume Galzin, Laurent Labaste Mauhe

• [12:40 - 13:00] Design of a H2 conditioning system: heat transfer of fuel cell system waste heat with a two-phase mechanically pumped loop 
  Arne K. te Nijenhuis , Aswin Pauw, Tim Luten, Roel van Benthem

   

• [11:00 - 11:20] Structural Reliability Assessment of Compact Offset Strip-Fin Heat Exchangers for Hydrogen-Electric Aircraft 
  Sahil Bhapkar , Siddharth Patkar, Markus Kober, Stefan Kazula
• [11:20 - 11:40] STRUCTURAL MODEL OF A VERY LIGHT AIRPLANE FOR FLUTTER ANALYSES CONSIDERING PILOT’S EFFECT ON  FLIGHT CONTROL SYSTEM 
  Robert Rogólski
• [11:40 - 12:00] Tangential Interpolation for the Operational Modal Analysis of Aeronautical Structures 
  Gabriele Dessena, Marco Civera, Oscar Elías Bonilla-Manrique
• [12:00 - 12:20] Comparison of selected compressive and tensile characteristics of four types complex porous structures made of INC718 
  K. Monkova, G. A. Pantazopoulos, P. P. Monka, M. Bouzouni, S. Papadopoulou, A. I. Toulfatzis
• [12:20 - 12:40] A Framework for Efficient Part-Scale Microstructure Prediction in Laser Powder Bed Ti-6Al-4V Using Combined Physics-Based Modeling and Machine Learning Surrogate Methods 
  Anthony G. Spangenberger , Diana A. Lados
• [12:40 - 13:00] -

• [11:00 - 11:20] Introduction to the MATISSE project 
  Helmut Kühnelt
• [11:20 - 11:40] Structural battery development in MATISSE – from electrochemistry and cell concept to manufacturing and scale-up 
  D. Popovici, L. Balc, D. Bresser, A. Gigl, M. Krammer, H. Kühnelt, S. Montes, L. Neidhart, S. Tischler, M. Vuksanovic, M. Wan, A. Beutl
• [11:40 - 12:00] Safety aspects of structural batteries and smart multifunctional electrical energy storage 
  Helmut Kühnelt, Alexander Beutl, Kristijan Rajinovic, Alexander Ryzhov, Roberto Simmarano
• [12:00 - 12:20] Damage tolerance of structural batteries integrated in sandwich structures under low velocity impact conditions 
  Francesco Di Caprio , Monica Ciminello, Frederic Laurin
• [12:20 - 12:40] Assessment of structural battery system performance, integration, and scaling trends for aeronautical application
  Akshayan Sudharshan
• [12:40 - 13:00] Open Discussion

• [11:00 - 11:25] Aircraft Interiors Reinvented - Data, Systems, and Sustainability in Action 
  Felipe Leite
• [11:25 - 11:50] Creating a smart data ecosystem to address evolving challenges in aviation 
  Ben Joseph
• [11:50 - 12:15] Sustainable production equipment thanks to new materials, modular design and intelligent connection
  Felipe Leite
• [12:15 - 12:40] Connecting data through AI and digital Continuity: Enabling a smarter, more sustainable aerospace industry
  Ben Joseph
• [12:40 - 13:00] DPP: Enabling Circularity Through Digital Product Passports in Aerospace 
  Joanna Steiner , Theresa Riedelsheimer

• [11:00 - 11:20] Assessment of C-Type Winglet Integration Impact on the Performance of a Fixed-Wing BWB UAV 
  Stavros Kapsalis , Thomas Dimopoulos, Pavlos Kaparos, Georgios Iatrou, Pericles Panagiotou, Kyriakos Yakinthos
• [11:20 - 11:40] Investigation of leading-edge dogtooth extensions on the low-speed aerodynamics of a BWB UAV 
  Spyridon Antoniou, Petros Dimitrentsis, Pericles Panagiotou, Kyriakos Yakinthos
• [11:40 - 12:00] Heterogeneous Vehicle Fleets for Advanced Air Mobility: Optimization across Metropolitan Demand Scenarios 
  Ansgar Kirste, Eike Stumpf
• [12:00 - 12:20] Low-Speed Wind Tunnel Tests on a UCAV Model with Controls 
  Hassan Aleisa, Konstantinos Kontis and Melike Nikbay
• [12:20 - 12:40] Overview of flow control techniques for tactical Blended Wing Body UAVs 
  Spyridon Antoniou
• [12:40 - 13:00] -

• [11:00 - 11:20] 2U CubeSat Design to Provide Space-Based ICNS Services 
  Alex Ganau , Amilcar Rincon-Charris
• [11:20 - 11:40] Flow Characterization Around a Mars Rover Model at Extremely Low Reynolds Number 
  J. Fernández-Antón, R. Bardera, A.A. Rodríguez-Sevillano, J. C. Matías-García and E. Barroso-Bardera
• [11:40 - 12:00] From Ground to Orbit: Adapting CMB Calibration Technology for Space 
  Irene Sánchez-Ramos , F. J. Casas, J. Cubas, G. Pascual-Cisneros, L. Castelló, E. Martinez-Gonzalez, B. Barreiro, P. Vielva
• [12:00 - 12:20] Optical analysis of an Origami inspired self-deployable baffle 
  Ester Velázquez-Navarro , Diego Rodríguez-Díaz, Pablo Solano-López, Ruy Sanz, Tomás Belenguer
• [12:20 - 12:40] Improving flexibility in modular space robots: An adapter to connect a research-related electromechanical interface with a commercial one 
  Jonas Benz , Wiebke Brinkmann, Mehmed Yüksel, Hilmi Kücüker, Utku Akinci,Jonas Eisenmenger

• [12:40 - 13:00] Mining the Moon and Asteroids: Building the Resource Infrastructure for a Sustainable Sunshade Architecture 
  Maheswaran T. , Anil A., Felicitas Leese

   

• [11:00 - 11:20] Al-based MMC development for aerospace applications
  Angelos Evangelou
• [11:20 - 11:40] Microstructural Engineering of AM materials
  Christos Sofras
• [11:40 - 12:00] Qualification & Certification of Metallic Components Towards Aerospace Readiness
  Hilde Larsen
• [12:00 - 13:00] Roundtable Discussion
  Ana María Fernández, Hilde Larsen, Christian Leinenbach

• [14:00 - 14:20] Where do we stand with regard to global market scale-up of SAF? 
  Alessandro Martulli, Sumit Maharjan
• [14:20 - 14:40] Challenges and Opportunities for the Market Scale Up in Emerging and Developing Economies 
  Francis Mwangi, Robert Malina
• [14:40 - 15:00] Effect of Sustainable Aviation Fuel prices on airlines’ operating results 
  Jose Jaume, Gustavo Alonso, Arturo Benito
• [15:00 - 16:00] Open Discussion

• [14:00 - 14:15] Enhanced aerodynamic performance of transonic flow over an A320 morphing wing using Hi-Fi numerical simulation at Reynolds number of 4.5 million 
  J. Abou-Khalil , Asproulias, A. Marouf, R. El Akoury, Y. Hoarau, J.F. Rouchon, M. Braza
• [14:15 - 14:35] Influence of inclusions morphology on the frequency response of a piezoelectric bimorph actuator made of a PVDF/PZT-5A composite 
  Salah Elbarnaty , J.P.M. Correia, Wiyao Azoti, Saïd Ahzi
• [14:35 - 14:55] Reduced Order Modelling by means of Proper Orthogonal Decomposition and Machine Learning for aerodynamic turbulent flows 
  Nils Maynard , Abderahmane Marouf, Jacques Abou Khalil, Rajaa El Akoury, Yannick Hoarau, Jean-François Rouchon, Marianna Braza
• [14:55 - 15:15] Spanwise travelling wave morphing trailing edge around an A320 wing through numerical simulation 
  Clément Rouaix , Horia Hangan, Marianna Braza
• [15:15 - 15:30] Experimental Investigation of Electroactive Morphing on an A320 Prototype under Subsonic Take-Off Conditions 
  J. Abou Khalil , N. Maynard, X. Delon, R. El Akoury, G. Harran, S. Cazin, M. Marchal, F. Bergame, H. Ayroles, J-F. Rouchon, M. Braza
• [15:30 - 15:45] Numerical simulation and physical analysis of the flow around a A320 wing prototype: electroactive morphing through waves actuation 
  N. Maynard, X. Delon, R. El Akoury, J. Abou Khalil, J.F. Rouchon, M. Braza 

• [15:45 - 16:00] Numerical investigation of the impact of embedded flapping actuators on wake dynamics and aerodynamic performance of a reduced-scale A320 airfoil in take-off and landing conditions
  R. Gauthier, J. Abou-Khalil, A. Marouf, Y. Hoarau, M. Braza, J. Vos   

   

• [14:00 - 14:20] Assessment of Heat Transfer and Fluid Flow Models for Low-GWP Refrigerants During Condensation and Boiling Inside Offset Strip Fins for the Next Generation Aeronautical Heat Exchangers 
  Nur Cobanoglu, Elsi Trejo Peimbert, Damien Poitou, Simone Mancin
• [14:20 - 14:40] Integration of functional mock-up units into digital twins of aircraft thermal management systems 
  Tobias Reischl, Corentin Lepais, Raphael Gebhart
• [14:40 - 15:00] Water-Evaporation Supported Fuel Cell Cooling Architectures for Aircraft 
  Raphael Gebhart, Luis Weber, Franciscus L.J. van der Linden
• [15:00 - 15:20] Scaled test program strategy for skin heat exchanger used in thermal management for Hybrid Electric Regional Aircraft 
  Benigno J. Lázaro , Ezequiel González-Martínez
• [15:20 - 15:40] Optimization of the Bleed System performance through the integration of a Jet Pump to mix high-pressure (HP) and intermediate-pressure (IP) port bleed air 
  Ralf von Frieling , Juan Tomas Prieto-Padilla, Vad Sivashanmugam, Sijmen Zandstra
• [15:40 - 16:00] Design and Analysis of a Baseline Fuel Cell Cooling System in a Conceptual Aircraft Design Framework 
  Philip Balack, Angel Garmilla Manzano 

• [14:00 - 14:20] Thermal Degradation Model Towards Modular Biobased Thermoplastic Polymer-Natural Fiber Processing 
  Dimitrios Apostolidis , Niklas Lorenz, Baris Kumru
• [14:20 - 14:40] Characterizing fatigue delamination growth in multidirectional CFRP laminates 
  John-Alan Pascoe , Davide Biagini, Francisco Monticeli, Yasmine Mosleh
• [14:40 - 15:00] Thermoset curing and ply drop effect on mechanical performance of composites 
  W.M. van den Brink , M. Post, N. van Hoorn, M. Nawijn, G. Allegri
• [15:00 - 15:20]Modal identification of a fighter jet aircraft via matrix-less tangential interpolation 
  Mikel Janices Chamizo , Gabriele Dessena, Marco Civera, Oscar E. Bonilla-Manrique
• [15:20 - 15:40] QUALIFICATION PROCESS FOR ADDITIVE MANUFACTURED METALLIC CONNECTING FLANGES FOR SPACE LAUNCHER 
  S. Franchitti , R. Borrelli, F. Di Caprio, G. Buonaiuto, A. Squillace 
• [15:40 - 16:00] -

• [14:00 - 14:20] Extending engine performance modelling for highly integrated transport aircraft 
  Yuan Y. , Staudacher S., Iyer N., Friedrichs J.
• [14:20 - 14:40] From Source to Immission: Modeling the Acoustic Chain for Highly Integrated Transport Aircraft 
  Sabine Langer, Ezzad Megat, Michael Pitzal, Mark Schneider, Juliette Thoma, Mingli Zhu, Christina Appel, Jan Delfs,  Johann Groß, Manuel Keßler, Tobias Ring
• [14:40 - 15:00] Engine-Airframe Integration – From Froude Theorem to Numerical Flow Simulation 
  Jan Hartmann, Stephan Staudacher
• [15:00 - 15:20] New Work in Aerospace Sciences – Two Years of Experience in the CRC SynTrac 
  Tobias Ring, Stephan Staudacher
• [15:20 - 15:40] Communicating Scientific Research: Introduction to a Case Study of Public Relations Implementation in the SynTrac Project 
  Rabea Morrison, Andreas Strohmayer, Kathrin Schulte
• [15:40 - 16:00] Off-Design Assessment in Preliminary Aircraft Design with Actual Operational Data 
  Jakob R. Schlittenhardt , Yuan Yiwen, Jonas Mangold, Stephan Staudacher, Andreas Strohmayer 

• [14:00 - 14:20] Overall Design and Technology Integration for a 9-Seater Hydrogen-Electric Commuter Aircraft Concept 
  Sören Kolb-Geßmann , Thomas Zill
• [14:20 - 14:40] uqStudio: A Tool Supporting Uncertainty Quantification in Multidisciplinary Design of Transportation Systems 
  Tawfiq Ahmed , Marko Alder
• [14:40 - 15:00] Electrical System Architectures for Future Electric Aircraft 
  Andrea Reindl , Franciscus van der Linden
• [15:00 - 15:20] Flying laboratory for testing electric propulsion systems at various altitudes 
  Cezary Galinski
• [15:20 - 15:40] AI Assistant for Rapid Modelling and Design of Aircraft in XR environment 
  Utkarsh Gupta, Atif Riaz, Sergio Jimeno
• [15:40 - 16:00] -

• [14:00 - 14:20] Smart Anti-Icing Solutions for UAVs: Enhancing Safety and Operational Endurance in Cold Weather Conditions 
  Paulina Woroniecka, Maciej Osiewicz
• [14:20 - 14:40] Smart-IAM - towards smart-city integrated AI-driven sustainable mobility 
  Bartosz Dziugiel , Adam Liberacki
• [14:40 - 15:00] Evaluating the Integration of Advanced Air Mobility into Intermodal Transportation Systems A System of Systems Simulation Approach 
  Nabih Naeem, Nazlican Cigal, Prajwal Shiva Prakasha, Björn Nagel
• [15:00 - 15:20] Centralized Landing Flow Merging for Drones Using Deep Reinforcement Learning 
  Aleksandr 'Sasha' Vlaskin , Jan Groot, Emmanuel Sunil, Dennis Nieuwenhuisen, Joost Ellerbroek, Jacco Hoekstra
• [15:20 - 15:40] A Web-Based Tool for Mission Planning and Risk Assessment of UAS Operations 
  Stefano Primatesta, Gianluca Scopelliti
• [15:40 - 16:00] -

• [14:00 - 14:20] Small launchers design during conceptual phases 
  Rubén González-González , Andrés García-Pérez, Gustavo Alonso Rodrigo
• [14:20 - 14:40] Conceptual study of European Martian rotorcraft with capability to transport passenger or load for future mars missions 
  Jakub Kocjan , Robert Rogólski, Łukasz Kiszkowiak
• [14:40 - 15:00] Combining Life Support Systems with Digital Twins: A new potential? 
  Felicitas Leese, Claas Olthoff
• [15:00 - 15:20] A Systematic Review of Circularity and Sustainability Strategies in the Space Industry 
  Joanna Steiner , Kai Lindow,Sebastian Wehking, Theresa Riedelsheimer
• [15:20 - 15:40] Development of an Iodine Feeding System for Space Applications 
  Carla Guidi, Manuel M. Saravia, Luca Bernazzani, Alessio Ceccarini, Fabrizio Paganucci, Enza Panzardi, Elia Lanci, Marco Mugnaini, Nils Gerrit Kottke
• [15:40 - 16:00] ECHOES: The Feasibility of Space-based VHF Communications
  Gabriel García Rodríguez

• [17:00 - 17:20] RESULTS OF THE H2AVIA PROJECT - POTENTIAL OF HYDROGEN FOR GLOBAL AVIATION 
  Fabian Nicolas Peter , M. Engelmann, M. Fikry, L. Moser, C. Warsch, R. Balderas, A. Muslic, E. Erden, M. Hornung, T. Welsch, F. Schültke, E. Stump, S. Kakkar, W. Heinze, R. Radespiel, T. Bielsky, V. Kriewall, F. Thielecke, N. Moebs, A. Strohmayer
• [17:20 - 17:40] An Integrated Approach to Hydrogen Aircraft Fuselage Design 
  Nicolas Moebs , Andreas Strohmayer
• [17:40 - 18:00] Fleet and Climate Assessment for Aircraft Configurations in the H2Avia Project 
  Adnan Muslić, Elif Erden, Rafael Balderas, Meriem Fikry, Leonard Moser, Karla G. Paz Sosa, Mirko Hornung
• [18:00 - 18:20] Case Study of a Liquid-Hydrogen-Powered Aircraft Utilizing Cryogenic Conformal Wing Tanks 
  Nils Roth, Marc Engelmann, Chang Xu, Barlas Türkyilmaz
• [18:20 - 18:40] Selection criteria for a fuel cell-based propulsion architecture of a regional box-wing aircraft 
  Ulrich Carsten Johannes Rischmüller , Mirko Hornung

• [18:40 - 19:00] Conceptual Design of a Zero-Emission Regional Aircraft Featuring a Hydrogen-Powered Box Wing with Distributed Electric Propulsion 
  Sara Hijazi , Andreas Strohmayer

   

• [17:00 - 17:20] Deep learning for SHM of composite structures 
  Giannis Stamatelatos , Dimitrios Zarouchas, Theodoros Loutas
• [17:20 - 17:40] AI-Driven Non-Intrusive Aircraft Icing Detection Using Control Surface Sensors 
  Gabriel Meisler, Ouassim Bara, Valérie Budinger, Michael Bauerheim
• [17:40 - 18:00] Damage detection by fiber óptic sensors and machine learning 
  Alfredo Guemes, Daniel del Río, Antonio Fernandez
• [18:00 - 18:20] A Digital Twin Platform for Smart Aircraft 
  Zahra Sharif Khodaei , Ferri Aliabadi, Ilias Giannakeas
• [18:20 - 19:00] Open Discussion 

• [17:00 - 17:20] Industrialising Additively Manufactured Heat Exchangers 
  Fatos Derguti, Michael Fuller, Ian Fordyce
• [17:20 - 17:40] A Fast Design and Performance Prediction Methodology and Tool for Centrifugal Compressors of Aircraft Environmental Control Systems 
  Gülberg Çelikel, Toon Bloem, Wilson Casas, Matteo Pini
• [17:40 - 18:00] Heat reuse in the bilge – two application examples using a convective heat transfer measurement sensor 
  Arnav Pathak, Marie Pschirer, Maximilian Kienberger, Victor Norrefeldt
• [18:00 - 18:20] A Phase-Change Skin Heat Exchanger Thermal Model based on Shell Elements 
  Guillermo Torres Godino , Jose Maria Chaquet Ulldemolins
• [18:20 - 18:40] Advanced Flow Meter for next-gen bleed & bleedless architectures 
  Odysseas Charalampopoulos

• [18:40 - 19:00] Design Tools and Integration Insights for Hydrogen Thermal Management in the MINIMAL Project 
  Isak Jonsson , Carlos Xisto, Petter Milten, Erik Hasselwander, Konstantinos Fotis

   

• [17:00 - 17:20] Smart Composite Complexes Aeronautical Structures: Mastering their life cycle management 
  Nazih Mechbal, Eric Monteiro, M. Rébillat
• [17:20 - 17:40] Optimization of the MFC piezoelectric sensor network for SHM of composite aerospace structures 
  Tadeusz Stepinski, Jakub Spytek, Łukasz Ambroziński, Siddhesh Raorane, Paweł Paćko, Andrea Calvo Echenique
• [17:40 - 18:00] Numerical Analysis of Experimental Uncertainties in Ultrasonic Guided Waves Propagation for Damage Monitoring in Composite Structures 
  Javier Hernandez-Olivan , Panagiotis Kolozis, José Manuel Royo, Andrea Calvo-Echenique, Susana Calvo,Elias P. Koumoulos
• [18:00 - 18:20] RAPIDO: A Computational Framework for Synthetic Lamb-Wave Simulation in Aeronautical Composite Materials for Structural Health Monitoring 
  Guillermo Azuara , Gerard Guillamet, Steffi Thomas, Eduardo Barrera, David Modesto, Carlos Cano
• [18:20 - 18:40] Theoretical investigation into the impact of sensor selection on predictive maintenance sensitivity in aeroengines 
  Francisco Sastre, Luis Sanchez de Leon, Ivan Blazquez, Angel Velazquez
• [18:40 - 19:00] Using Bayesian Networks for Fault Diagnosis: An Application to a Small Unmanned Aerial Vehicle 
  Alexander Athanasios Kamtsiuris , Christian Trapp, Ann-Kathrin Koschlik, Florian Raddatz, Gerko Wende
• [19:00 - 19:20]Vibroacoustic Optimization of the Airframe Using Energy Harvesting Resonators: An Experimental and Numerical Approach 
  Florian Mock , Daniel Alboldt, Lukas Kettenhofen, Kai-Uwe Schröder 

• [17:00 - 17:20] Stargate: Accelerating Greener Aviation 
  Charlotte Verreydt
• [17:20 - 17:40] Shaping Sustainable Solutions for EU Airports (Tulips Project)
  Fokko Kroesen, Karina Ospina
• [17:40 - 18:00] OLGA Project
  Delia Dimitriu
• [18:00 - 19:00] Panel Discussion
  • What will be the focus in the final year?
  • Where do you see follow-up or continuation?
  • What are your “success projects”?
  • Key lessons learned – would you recommend doing a Green Deal project?
  • What do you admire or envy from other Green Deal projects?
  • Which collaborations have been particularly valuable?
  • How do you measure results and align performance monitoring?
  • How do you align results with the other Green Deal projects?

• [17:00 - 17:20] Cooldown analysis of a foam-based LH2 Aircraft Storage Tank 
  Carles Oliet , Marcial Mosqueda-Otero, Eugenio Schillaci, Jesús Castro
• [17:20 - 17:40] Manufacturing of an engine Outlet Guide Vane with Automated Fiber Placement and One-Shot Resin Transfer Molding process 
  Cristian Builes Cárdenas , Elena Rodríguez Senín, Mario Román Rodrigues
• [17:40 - 18:00] Possibilities of using quaternion methods in helmet-mounted cueing systems in order to increase the reliability of their operation 
  Andrzej Pazur , Slawomir Michalak, Andrzej Szelmanowski, Paweł Janik
• [18:00 - 18:20] Advancing Sustainable Aviation: Insights from Methodologies, Technologies, and Policy Frameworks for Climate Impact Mitigation 
  Edoardo Bucchignani , Alessandra L. Zollo, Veronica Villani, Lidia Travascio, Mario A. Solazzo, Angela Vozella
• [18:20 - 18:40] Summary of the high voltage distribution regulatory gap analysis within the CONCERTO project, with a particular focus the validity of the results 
  Alexander Kieß , Joachim Siegel, Andreas Strohmayer, Guido Notari, Paul Miller, Marc Pontrucher, Marin Wenger, Sarbani Mukherjee

• [18:40 - 19:00] Systems of Systems Guided Agent Communication and Collaboration in Aerial Wildfire Fighting 
  Nikolaos Kalliatakis, Nabih Naeem, Prajwal Shiva Prakasha

   

• [17:00 - 17:20] Advanced Cockpit Concepts as Enablers for Single Pilot Operations 
  Vittorio Di Vito, Giulia Torrano
• [17:20 - 17:40] Supporting Single Pilot Operations through an ADS-B based Automatic Separation Assurance and Collision Avoidance System 
  Vittorio Di Vito , Giulia Torrano
• [17:40 - 18:00] Affordable Hardware-in-the-Loop Testing: A Lightweight Framework for the Development and Initial Validation of Support Systems for Single-Pilot Operations 
  Piotr Grzybowski
• [18:00 - 18:20] Air taxi operations as source of knowledge for better understanding of SPO risks 
  Bartosz Dziugiel
• [18:20 - 18:40] OlivIA: enabling joint work in aircraft divert scenario through Operational Intentions 
  Ricardo J.N. dos Reis , Anaisa Villani, Theodore Letouze, Charles-Alban Dormoy, Jaime Diaz Pineda

• [18:40 - 19:00] -

   

• [17:00 - 17:20] Generation and study of probabilistic solution spaces for conceptual and preliminary aircraft design 
  Vladislav Tihomirov Todorov , Dmitry Rakov, Andreas Bardenhagen
• [17:20 - 17:40] Dataset synthesis through Bayesian Networks for Engineering Design purposes 
  Andrea Spinelli, Julian Martisson Bonde, Timoleon Kipouros, Ola Isaksoon
• [17:40 - 18:00] Exploring how sustainability trades against performance and manufacturability during pre-embodiment evaluation of new technology integration
  Julian Martinsson Bonde, Ola Isaksson, Timos Kipouros, Michael Kokkolaras, Petter Andersson
• [18:00 - 18:20] Visual Analytics for Multi-Fidelity Multi-Disciplinary Optimisation studies under Uncertainty 
  Shubham Shubham, Andrea Spinelli, Timoleon Kipouros
• [18:20 - 18:40] Large Language Models as translators for the advanced design space exploration of complex engineering products 
  Alejandro Pradas Gómez , Andrea Spinelli, Timoleon Kipouros, Ola Isaksson

• [18:40 - 19:00] Open Discussion

   

• [10:30 - 10:50] Alcohol-to-Jet production routes – potentials and challenges through new combinations of process steps and feedstock 
  Arne Roth , Ferdinand Vogelgsang
• [10:50 - 11:10] SUN-to-LIQUID II: Environmental and Economic Perspectives of Sustainable Aviation Fuel from Sunlight and Air 
  Moritz-Alexander Thiel , Christoph Falter, Heider Hussain, Valentin Batteiger, Andreas Sizmann
• [11:10 - 11:30] Navigating Passengers through Sustainability Initiatives within Air Travel: WTP for Voluntary Carbon Offsets and Sustainable Aviation Fuels 
  Naomi Sieben, Christopher Schruba
• [11:30 - 11:50] Performance and Emissions Analysis of a Microturbine Operated with Sustainable Aviation Fuel 
  Maria Grazia De Giorgi , Antonio Greco, Sara Bonuso, Pasquale Di Gloria, Bartosz Gawron, Tomasz Białecki, Andrzej Kulczycki
• [11:50 - 12:10] Conceptual Design of a Metal Hydride Cartridge for the Recovery of Gaseous Boil-off Losses from Liquid Hydrogen Tanks 
  Florian Franke, Stefan Kazula
• [12:10 - 12:30] Comparative Analysis of Aircraft Energy Management Strategies for a Reduction in Hydrogen Consumption and Battery Ageing 
  Ayesha Wise , Sharmila Sumsurooah, Osama Hebala, Serhiy Bozhko, Seang Yeoh

• [10:30 - 10:50] Exploration of High Aspect Ratio Strut-Braced Wings: A Low-Fidelity Framework for Early Aircraft Design 
  Ousmane Sy , Shantanu Sapre, Emmanuel Benard, Joseph Morlier, Yoann Le Lamer
• [10:50 - 11:10] Development of the Architecture of a Conceptual Design Tool for Manned and Unmanned Fixed-Wing Aircraft 
  Rebeca González-Pérez , Alejandro Sanchez-Carmona, Cristina Cuerno-Rejado
• [11:10 - 11:30] HADES – A Framework for Hierarchical Architecture Design for Engineering Systems 
  M. Mischke , D.S.S. Katabathula, S. Rempe, R. Frank, S. Stoppa, T. Geyer
• [11:30 - 11:50] Conceptual study of 80-pax fuel cell-driven aircraft for sustainable aviation 
  Diego Giuseppe Romano, Etienne Guillame Behar, Mattia Barbarino, Gianpiero Buzzo, Giovanni Fasulo
• [11:50 - 12:10] Adaptive Emergency Transport for Humanitarian Evacuation & Response (AETHER)
  Laurin Piechotta, Daniel Götz, Johannes Götzen, Süheyl Savran, Raman Law, Carlos Santiago Valladares Quintana
• [12:10 - 12:30] Potentials of Hydrogen Powered Short-Range Aircraft Concepts with Mild-Hybrid-Electric-Propulsion Architectures 
  Daniel Silberhorn, Georgi Atanasov

• [10:30 - 10:50] Vibration-based damage detection and localisation on a trainer jet aircraft wing 
  Gabriele Dessena, Marco Civera, Andrés Marcos, Oscar E. Bonilla-Manrique
• [10:50 - 11:10] Identification of the natural vibration modes of a turbine engine fan using one- and three-dimensional laser vibrometry 
  Michał Szczesniak, Aleksander Olejnik, Robert Rogolski
• [11:10 - 11:30] Detection of Water Ingress in Honeycomb Composites under Freeze-Thaw Cycles Using Acoustic Emissions 
  Helge Pfeiffer, Tian Xun Lin, Jeroen Soete, Johan Vanhulst, Dimitrios Chronopoulos
• [11:30 - 11:50] Spatially Resolved Monitoring of the Curing Degree in the Liquid Resin Infusion Process using Near-Infrared Hyperspectral Imaging 
  Xabier Zurutuza Lasa , Laura Arevalo Diaz, Janusz Poplawski, Cristian Builes Cárdenas, Tania Grandal González, Arántzazu Núñez Cascajero, Rubén Ruiz Lombera, Mario Román Rodríguez, Daniel Maestro-Watson, Luka Eciolaza Echeverria
• [11:50 - 12:10] A Multi-Modal Approach to Non-Destructive Testing of Adhesive Bonds 
  Elena Jasiuniene
• [12:10 - 12:30] -

• [10:30 - 10:50] Thermal and mechanical characterization of functionalized carbon fiber/epoxy resin composites with Graphene 
  Elena Rodríguez Senín , Cristian Builes Cárdenas, Mario Román Rodríguez
• [10:50 - 11:10] SEQUENTIAL RESISTANCE WELDING OF A THERMOPLASTIC COMPOSITE LEADING EDGE DEMONSTRATOR: FROM LABORATORY TESTING TO FULL-SCALE WELDING 
  Massimiliano Russello, Enrico Chemello, Marta Juanatey Muradas, Mohsen Bahrami
• [11:10 - 11:30] Sustainable aviation through a novel multi-material joint technology for aeronautical applications 
  E.Pappa, A. Kumar, C. Annicchiarico, N. Gallo, M. Cabrioli, M. Silva Colmenero, M. Vanazzi, B. Fošnarič, T. Černelič, L. Margaria, E.F.Altunok, A.Coluccia, G. De Pasquale, J. Bellver, B.Perez
• [11:30 - 11:50] Process Strategies for DED-Arc Manufactured Pre-Forms in Ti15-3-3-3 in Flowforming Applications 
  Robert Lau, Frederik Dahms, Hannes Zapf, Henrik Wünsch, Alexander Mädje, Ingomar Kelbassa
• [11:50 - 12:10] Overcoming processability limitations in Al6082 alloy by PBF-LB/M of AMMCs with TiC/SiC reinforcements 
  Raul Gomez
• [12:10 - 12:30] New Opportunities for Ultrasonic Fatigue: A Perspective on Key Considerations for its Broader Acceptance in Design/Qualification and Case Studies Using Conventional and Additively Manufactured Metals 
  Diana A. Lados, Anthony G. Spangenberger
• [12:30 - 12:50] Developing a Qualification and Testing Framework for Cold Spray Repairs in Aerospace Applications 
  Konstantinos Stamoulis, Stratos Koufis, Bernard Bosma, Lars Anderiessen, John-Alan Pascoe 

• [10:30 - 10:50] Data-Driven Approach for Fast Noise Prediction in Preliminary Aircraft Design using the e-Genius as Example 
  Dominik Eisenhut, Andreas Strohmayer
• [10:50 - 11:10] On the effect of angles of attack and sideslip on aircraft stability derivatives 
  L. M. B. C. Campos, J. M. G. Marques
• [11:10 - 11:30] Surrogate Modeling of Nonlinear Folding Wing Tip Aerodynamic Coefficients 
  Andreas Molz, Christian Breitsamter
• [11:30 - 11:50] Transport Aircraft Shock Buffet Investigations at Forced Wing Motions 
  Vinzenz Völkl, Christian Breitsamter
• [11:50 - 12:10] Design of Laminar Transonic Airfoils with Cross Flow Attenuation at Large Sweep Angles using Bayesian Optimisation 
  Samarth Kakkar, Thomas Streit, Arne Seitz, Javier Ruberte Bailo, Rolf Radespiel
• [12:10 - 12:30] THE INFLUENCE OF MODEL SCALE ON WIND TUNNEL TEST RESULTS 
  Andrzej Krzysiak, Aleksander Olejnik, Łukasz Kiszkowiak

• [10:30 - 10:50] Sustainability-driven design optimization of fuselage panels through mathematical modeling 
  Dimitris Sotiropoulos, Aikaterini Anagnostopoulou, Ioannis Sioutis, Konstantinos Tserpes
• [10:50 - 11:10] An approach to predict fatigue delamination propagation in curved composite laminates under non-constant mixed-mode conditions: experiments and simulation correlation 
  Carlos Mallor, M. Sanchez, A. Calvo, S. Calvo, H. Roman-Wasik, F. Martin de la Escalera
• [11:10 - 11:30] Gradient-Based Design Optimisation of Composite Aircraft Structures Using CUF Beam Theory 
  Donato Cardone, Andrea Cini, Rauno Cavallaro
• [11:30 - 11:50] A Numerical Investigation on the Analogy Between Hypervelocity Object Impact and Laser Shock Impact for Space Applications 
  Konstantinos Tserpes, Panagiotis Kormpos, Ioannis Floros, Panagiotis Rallis, Laurent Berthe, Mathieu Weber, Alessandra Benuzzi
• [11:50 - 12:10] Droplet Impact Experiments and Numerical Simulations for Rain Effects on Structural Surfaces 
  Martin Sauer, Christian Herrles, David Danzeisen, Silke Grünke, Oliver Rohr
• [12:10 - 12:30] Experimental and Numerical Evaluation of Additively Manufactured Airfoils using Continuos Carbon Fibers 
  Ivica Smojver, Darko Ivančević, Fran Ušurić
• [12:30 - 12:50] Investigation of adhesive bonded joints for the integration of novel energy systems into a hybrid electric regional aircraft fuselage 
  Panagiotis Gyftos, Ioannis Lentzos, Anastasia-Despina Ioannou, George Lampeas
• [12:50 - 13:10] Adaptation of Damage Tolerance Design Principles to Cryogenic Hydrogen Tanks 
  Stavros Valilis, Konstantinos Fotopoulos, Ioannis Diamantakos, George Lampeas

• [10:30 - 10:50] Evaluation of One Engine Inoperative Scenarios for Electrified Multi Engine Aircraft from the Certification Perspective 
  Robin Frank, Stephan Rempe, Marcel Mischke, Sebastian Stoppa, Thomas Geyer
• [10:50 - 11:10] Evaluation of an AI-aided Document Framework for Certification of Novel Aircraft Propulsion Systems 
  Sebastian Stoppa, Stephan Rempe, Marcel Mischke, Robin Frank, Thomas Geyer
• [11:10 - 11:30] Firms’ strategic management of R&I funding synergies: Spanish aeronautics’ participation at national and European programs 
  Juan Francisco Reyes Sánchez , Gustavo Alonso, Gustavo Morales-Alonso
• [11:30 - 11:50] Efficient modeling of aircraft emission inventories for technology impact assessment in future markets 
  Ruben Grunau, Malte Niklaß, Benjamin Lührs
• [11:50 - 12:10] Application of a syntax-based text extraction algorithm on airworthiness security regulations 
  Adrian Hechelmann
• [12:10 - 12:30] -

• [10:30 - 10:50] Exploring the potential benefit of Systems Modelling state of the art Design Tools 
  Timoleon Kipouros, Ola Isaksson, Petter Andersson, Anna-Maria McGowan, Andrea Spinelli, Julian Martinsson, Alex Pradas
• [10:50 - 11:10] Enhancing Product Design in Electric Aviation through Digital Twins and Production Feedback Integration 
  Jörg Brünnhäußer, Magdalena Dziubinska, Umer Zakheer, Thomas Zimmermann, Renaud Kenfack Zangue, Robert Joost, Kai Lindow
• [11:10 - 11:30] Accelerating and improving the development of new aeronautical systems through the DLR Digital Engineering Environment 
  Luca Boggero, Björn Nagel
• [11:30 - 11:50] Using numerical simulation as a basis of security and environmental sustainability engineering of composite structures subjected to a lightning strike 
  Christine Espinosa
• [11:50 - 12:10] Aircraft ditching by simulation: a contribution to support virtual analysis using a meshfree pointset method 
  Christian Leon Muñoz, Dieter Kohlgrüber, Michael Petsch
• [12:10 - 12:30] Generative AI in Aerospace: Applications in Concept Design, Supply Chain Resilience, and Knowledge Management 
  Marie-Annabel Flouzat, Kerdreux , Rodriguez, Thépaut, Uluc, Venugopal,Al-Misfer, Bin-Saeed,Shabir, Halliday, Delcros, Gouet, Leorri, Hiltner, Kaufmann, Solheim, Osterstrom , Di Nizio, La Fata, Maggioni,Auzillion, Bouteiller,Gaillot, Labit 

• [13:30 - 13:50] Experimental sloshing regimes in horizontal cylindrical tanks 
  Florin Festila, Lucian Constantin, Maria Casapu, Amado Stefan, Paul-Virgil Rosu
• [13:50 - 14:10]  Composites for Liquid Hydrogen storage: cryogenic environmental aging and mechanical performance 
  Pietro Agostino, Sotirios Grammatikos
• [14:10 - 14:30] Performance Analysis of a Commercial Aircraft Liquid Hydrogen Fuel System
  Alireza Ebrahimi, Andrew Rolt, Drewan Sanders
• [14:30 - 14:50] Accelerated refueling of type IV hydrogen pressure tanks by passive means: Thermal material characterization and evaluation 
  Nico Liebers, Sven Ropte
• [14:50 - 15:10] DEMOCRITE project: an EREA collaborative research on H2 tank design and A/C integration 
  Ignazio Dimino, Maciej Karny, Cedric Julien, Mircea Bocioaga, Monica Ciminello, Salvatore Ameduri
• [15:10 - 15:30] Experimental Campaign and Numerical Validation of Isothermal Sloshing: Progress Toward the Implementation of Hydrogen Tanks in Civil Aviation 
  Ignacio Sanchez-Ojeda, Javier Calderon-Sanchez, Cristian Flores-Rodriguez and Leo M. Gonzalez-Gutierrez
• [15:30 - 15:50] Liquid hydrogen fuel system architecture and integration analysis for regional aircrafts 
  Rui Ferreira, Helder Xavier Nunes 

• [13:30 - 13:50] Multidisciplinary Design Optimization of Flexible Aircraft: Advancing Aeroelastic Co-design with Active Load Alleviation 
  Armand Ioan Curpanaru, Philippe Pastor, Fabrice Demourant and Eric Nguyen Van
• [13:50 - 14:10] Preliminary Design and Wind Tunnel Testing of a Morphing Wing Section for Subsonic Incompressible Flight 
  David Macovei, Marta Oliveira, Pedro Quital, Rui Moreira, Mariana Banea, Carolina Hernandez, Jose Luis Ruiz, Juan A. Cárdenas-Rondón
• [14:10 - 14:30] The NetShAir Project - Reducing CO2 Emissions from Aviation by Aircraft Sharing and Passenger Bundling 
  Thomas Hagspihl, Vasiliki Kalliga, Yiwen Zhu, Carsten Rischmüller, Rainer Kolisch, Constantinos Antoniou
• [14:30 - 14:50] Prototype wing design and manufacturing for reflexed airfoil morphing
  Panagiotis Georgopoulos, Jurij Sodja, Roeland De Breuker

• [14:50 - 15:10] Coupling Shear Panel Theory with Beam Models for Gradient-Based Wing Optimization 
  Moritz Bäß, Lukas Kettenhofen, Kai-Uwe Schröder

   

• [13:30 - 13:50] Preliminary Design and Aircraft-Level Assessment of Piezoelectric Resonant Ice Protection Systems 
  Pierre Bonhomme, Marc Budinger, Valerie Pommier-Budinger, Valerian Palanque
• [13:50 - 14:10] Electromechanical Resonant Ice Protection Systems Using Voice Coil Actuators 
  Younes Rafik, Marc Budinger, Valerie Budinger, Hubert Polaert
• [14:10 - 14:30] Experimental analysis of 2D Nanomaterial-Based Transparent electrodes for Efficient Photovoltaic Devices in Aviation Applications 
  Noor ul ain ahmed, Maksim Shundalau,Marialuigia Raimondo,Vidmantas Gulbinas, Maria Sarno, Claudia Cirillo, Patrizia Lamberti
• [14:30 - 14:50] MXene/Polyaniline Nanofiber Composite Functionalized with Recycled MnO for High-Performance Supercapacitors 
  Renata Adami, Faraz Khan, Nicole D’Avanzo, Marigrazia Iuliano, Claudia Cirillo, Libero Sesti Osséo, Maria Sarno
• [14:50 - 15:10] Halogen-Free Electrolytes for Safe and High-Performance Lithium-Ion Batteries in Electric Aircraft: A Nanotechnology Approach 
  Musab Hammas Khan, Raffaele Longo, Liberata Guadagno, Renata Adami, Maria Sarno, Patrizia Lamberti, and Vincenzo Tucci

• [15:10 - 15:30] Analyzing the efficiency and the transparency of innovative transparent electrodes for space solar cells applications 
  Francesco Cipriani, Maksim Shundalau, Patrizia Lamberti

   

• [13:30 - 13:50] Assessing Bi-Stability in 3D-Printed Origami Deployable Structures 
  Ester Velázquez Navarro, Pablo Arribas, Boris Martín, Santiago Martín Iglesias, Pablo Solano-López , Marta María Moure, Inés Uriol Balbin
• [13:50 - 14:10] 4D Printing of Piezoelectric Polymers for Aerospace Applications: Processing Challenges, Functionalization, and Integration with High-Performance Substrates
  Apostolos Argyros, Vasileios Stratiotou Efstratiadis, Nikolaos Michailidis
• [14:10 - 14:30] Process development and additive manufacturing of a real scale rocket nozzle extension with filigree wall strengths by using powder-based laser material deposition (LMD)
  Jochen Kittel, Min-Uh Ko, Thomas Schopphoven
• [14:30 - 14:50] Aerogel based high thermal insulating materials for space applications 
  Eunate Goiti, Marta Ocejo, Alejandro Obregón, Yolanda Belaustegui
• [14:50 - 15:10] The potential benefits and drawbacks of using thermoplastic composites in satellite structures 
  Maciej Gizynski, Ewa Kaczorowska-Lukasik, Piotr Kowalczyk, Wojciech Krauze
• [15:10 - 15:30] Development of the advanced turboprop engine power turbine containing 3D printed hardware 
  Michał Hetlof, Błażej Czajka, Katarzyna Gąsior,Justyna Anna Pluta

• [13:30 - 13:50] Flight Validation of Wind Tunnel Measurements for a Cropped Delta Wing Design 
  Filip Zubaľ, Lukáš Vavrinec, Jan Navrátil 
• [13:50 - 14:10] A Comprehensive Aero-Vibro-Acoustic Approach to Cabin and Airport Noise Mitigation in a 19-Seater Hydrogen-powered Electric Aircraft 
  Mattia Barbarino, Giovanni Fasulo, Antonio Pagano, Antonio Visingardi, Fabrizio Morlando, Francesco Petrosino, Miha Zupanic, Jernej Drofelnik
• [14:10 - 14:30] Numerical and Experimental Assessment of Cabin Noise Transmission Loss for Piaggio P.180 aircraft 
  Carmen Brancaccio, Giovanni Fasulo, Mattia Barbarino, Felicia Palmiero, Giorgio Travostino, Roberto Citarella
• [14:30 - 14:50] Mesh adaptation on hybrid unstructured meshes for immersed boundary methods with applications to industrial aerodynamics 
  Jonatan Núñez-de la Rosa, Esteban Ferrer, Eusebio Valero
• [14:50 - 15:10] Gust behaviour analysis of fixed-wing multi-mission Remotely Piloted Aircraft
  Carmelo-Javier Villanueva-Cañizares, Álvaro Gómez-Rodríguez, Cristina Cuerno-Rejado
• [15:10 - 15:30] Aeroacoustic Analysis of Pusher Propeller Noise – A Comparative Case Study
  Adam Sieradzki, Witold Klimczyk

• [13:30 - 13:50] Zonal Simulation of air flow dynamics in the leakage case of a liquid hydrogen tank in a hybrid-electric regional aircraft 
  Christina Matheis, Victor Norrefeldt
• [13:50 - 14:10] Experimental results of the distributoin of halon-free cargo fire suppresion agents in an experimental cargo hold demonstrator 
  Victor Norrefeldt, Arnav Pathak, Marie Pschirer, Maximilian Kienberger
• [14:10 - 14:30] Additional Mitigation Means against the Thermal Runaway of Portable Electronic Devices in Cabin and Cockpit 
  Victor Norrefeldt, Simon Holz, Jonas Pfaff, Arnav Pathak, Marie Pschirer, Sebastian Schopferer, Jürgen Kuder
• [14:30 - 14:50] Simulation of the Passenger and Crew Exposure from a Thermal Runaway of Portable Electronic Devices in Cabin and Cockpit
  Arnav Pathak, Victor Norrefeldt, Simon Holz, Jonas Pfaff, Sebastian Schopferer, Jürgen Kuder
• [14:50 - 15:10] A new approach to the application of SMA strain sensors for structural health monitoring of COPVs 
  Alexander Hiekel, Björn Senf, Welf-Guntram Drossel

• [15:10 - 15:30] Safety case modeling for fire risks in liquid hydrogen-fueled aircraft 
  Joël Jézégou, Juan Pedro De Gracia Roca, Riccardo Chiovato

   

• [13:30 - 13:50] Flutter analysis of a hose-drogue system for aerial refueling 
  Keyvan Salehi Paniagua, Pablo García-Fogeda Núñez, Félix Arévalo Lozano  
• [13:50 - 14:10] Continuous movable layout parameterisation for Gust Load Alleviation 
  Stefan de Boer, Jurij Sodja, Roeland De Breuker
• [14:10 - 14:30] An Open Virtual Test Case for Open Fans
  Michele Greco, Roque Corral, Fanzhou Zhao, Rainer Schnell, Carola Rovira Sala, Raul Martinez Luque, Fernando Gea-Aguilera
• [14:30 - 14:50] A Multi-Fidelity Aeroelastic Toolchain: From UAVs to Hydrogen Transport Aircraft 
  Fanglin Yu
• [14:50 - 15:10] Flight tests of scaled demonstrator for a general aviation aircraft concept
  Thorben Hammer, Stefanie de Graaf, Anne Treder
• [15:10 - 15:30] Modulare or Technology Specific Scaled Flight Demonstrator – An Approach to Estimate the Impact on Project Costs 
  Dominique Paul Bergmann, Andreas Strohmayer
• [15:30 - 15:50] Modification of a modular scaled flight demonstrator towards energy reduction using mission-adaptive propellers and innovative energy harvesting approaches for distributed electric propulsion systems 
  Achim Kuhn, Eskil Nussbaumer, Jan Denzel, Dominique Bergmann, Andreas Strohmayer

• [13:30 - 13:50] Requirement-based component placement for aircraft design 
  Brigitte Boden, Tim Burschyk
• [13:50 - 14:10] Establishing Effective Visualization Techniques for Schema-Based Collaborative Datasets on the Air Transportation System Level 
  Andrea Mancini, Marko Alder, Raul Garcia Sanchez
• [14:10 - 14:30] Traceable Intercorporation Data Exchange and Processing using a Graph Based Infrastructure 
  Paula Ruß, Oliver Bertram, Frank Dressel, Jonas Jepsen, Gerald Schegk, Malte Christian Struck, Deoclécio Valente, Arthur Zamfir
• [14:30 - 14:50] Accelerating Electric Aircraft Design Using Digital Twinning Technologies
  Dongyu Li
• [14:50 - 15:10] The Quest for a Digital Safety Thread in the End-to-End Aircraft Design 
  Loris Dal Lago, Marco Donnarumma, Luigi Di Guglielmo, Vincenzo Petrella

• [15:10 - 15:30] Multi-Agent Deep Reinforcement Learning Framework for efficient Aerial Wildfire Fighting 
  Leonard Bardtke, Nabih Naeem, Thomas Clemen, Nikolaos Kalliatakis and Prajwal Shiva Prakasha